Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC894LP5E is a 8550 MHz Band Pass Filter with 50 OHM input/output impedance, -40 to 85 °C operating temperature range. Ideal for RF applications, it's a surface mount filter measuring L5.1xB5.1xH1.0 mm, offering 0.01 W average input power handling capability.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$0.485
$0.451
IDEA Electronic Components Group
$0.521
$0.495
DigiPath Technology Company
$0.813
$0.780
Ampacity Inc.
$1.400
One Stop Electronics
$2.400
Semicontronic
$4.400
$4.290
$4.268
AZTECH Wire
$7.210
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Corphita
Vigor
Microchip USA
Perfect Parts
Authorized Procurement Solutions
Band pass filters are ideal for applications where a specific range of frequencies needs to be transmitted or received, providing precise signal filtering.
With a high maximum operating temperature, this filter can withstand elevated temperatures without sacrificing performance, ensuring reliable operation in various environments.
The low minimum operating temperature allows for use in cold environments without risk of damage or reduced functionality, making this filter versatile for different operating conditions.
Matte tin terminal finish offers good solderability and corrosion resistance, ensuring secure and long-lasting connections for the filter.
The specific cutoff frequency of 8550 MHz indicates the range of frequencies that can pass through the filter, making it suitable for applications requiring signal isolation at this frequency.
With an impedance of 50 ohms, this filter is compatible with standard RF devices and can effectively match signal sources and loads for optimal signal transfer.
Surface mounting type allows for easy and secure installation on PCBs, saving space and simplifying assembly processes for electronic devices.
General Purpose Electronic Filters HMC894LP5E attributes and parameters. Explore more General Purpose Electronic Filters devices from Analog Devices
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
JESD-609 Code:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Terminal Finish:
Width (mm):
HMC894LP5E Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 23/Feb/2015 Updated Revision A 27/Jul/2015
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Asi Semiconductor
LM358M
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
BP0FA1100A700
KYOCERA AVX
BP0FA1100A700 by KYOCERA AVX is a 31-terminal BAND PASS FILTER with 1100 MHz Center Frequency, 5 dB Max Insertion Loss, and 50 OHM Impedance. Ideal for electronic applications requiring filtering at temperatures ranging from -55 to 85 °C, it comes in a ceramic package for surface mounting using waffle pack method.
ADMV8526
Analog Devices
BAND PASS FILTER;
ACPF-8440-BLK
Broadcom
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
PLP-105
LOW PASS FILTER;
ACPF-8420-BLK
HMC897LP4ETR
Analog Devices' HMC897LP4ETR is a 24-terminal BAND PASS FILTER with a Center Frequency of 14000 MHz and Input Impedance of 50Ω. It operates b/w -40°C to 85°C, ideal for RF applications requiring precise frequency filtering in compact designs.
ACPF-7002-BLK
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; Height: 1 mm; Manufacturer Series: ACPF-7002;
HMC1000LP5E
Analog Devices' HMC1000LP5E is a 32-terminal BAND REJECT FILTER with 7900 MHz Center Frequency, 50 OHM Impedance, and -40 to 85 °C Operating Temperature. Ideal for electronic applications requiring precise signal filtering in compact spaces.
ACFF-1024-BLK
BAND PASS FILTER; No. of Terminals: 5; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
DEA162690LT-5057C1
TDK
DEA162690LT-5057C1 by TDK is a LOW PASS FILTER with 4 terminals, operating from -40 to 85 °C. It has a center frequency of 2200 MHz, insertion loss of 0.6 dB, and impedance of 50 OHM. Ideal for applications requiring surface mount filters in electronic devices.
BP0FA1190A7TR\250
BP0FA1190A7TR\250 by KYOCERA AVX is a BAND PASS FILTER with 31 terminals. It has a center frequency of 1190 MHz and max insertion loss of 5 dB. This filter is used in general purpose electronic applications requiring a narrow frequency range.
LP2816A0512SNTR
LOW PASS FILTER; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
ADMV8913
Analog Devices' ADMV8913 is a 30-terminal high pass filter with 5 dB max insertion loss, 9.5 MHz cutoff frequency, and 50 Ohm input/output impedance. Ideal for general purpose electronic filtering applications, it operates b/w -55 °C to 105°C in surface mount configurations.
DEA202450BT-1213C1
DEA202450BT-1213C1 by TDK is a BAND PASS FILTER with 4 terminals, operating from -40 to 85 °C. It has a Center Frequency of 2450 MHz, Insertion Loss of 1.5 dB, and compact dimensions (L2.0XB1.25XH0.95 mm). Ideal for electronic applications requiring precise frequency filtering in limited space.
IP4337CX18/LF,135
Nexperia
LOW PASS FILTER; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 20; Minimum No. of Sections: 1; Center/Cutoff Frequency (fo/fc): 1900 MHz;
DEA252450BT-2027A1
TDK's DEA252450BT-2027A1 is a 4-terminal BAND PASS FILTER with 30 dB attenuation at 4800 MHz. Operating b/w -40 to 85 °C, it has a max insertion loss of 1.2 dB and impedance of 50 OHM. Ideal for electronic applications requiring precise filtering at 2450 MHz.
ACPF-7002-TR1
BAND PASS FILTER; Width (mm): 1.6; Dimensions: L2.0XB1.6XH1.0 (mm)/L0.079XB0.063XH0.039 (inch); Maximum Insertion Loss: 3.7 dB; Packing Method: TAPE AND REEL; Output Impedance (ohm): 50 OHM;
LTC6602IUF#TRPBF
LTC6602IUF#TRPBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temperatures from -40 to 85 °C. It features matte tin finish, dimensions of L4.0xB4.0xH0.75 mm, and is surface mountable. Ideal for applications requiring general purpose electronic filtering in compact spaces.
XLF-252+
Mini-circuits
XLF-252+ by Mini-circuits is a low pass filter with 1.6 dB max insertion loss and 3220 MHz cutoff frequency. Ideal for applications requiring 50 OHM impedance, it operates b/w -55 to 105 °C, with VSWR of 1.3.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
HMC896LP4E
BAND PASS FILTER; Height: 1 mm; Output Impedance (ohm): 50 OHM; Width (mm): 4.1; Impedance (Input): 50 OHM; Average Input Power: .0063 W;
HMC892LP5E
BAND PASS FILTER; Minimum Operating Temperature: -40 Cel; Center/Cutoff Frequency (fo/fc): 4000 MHz; Maximum Operating Temperature: 85 Cel; Width (mm): 5.1; Maximum Insertion Loss: 8 dB;
HMC882ALP5E
LOW PASS FILTER; Maximum Frequency: 6900 MHz; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum No. of Sections: 1; Height: .75 mm;
HMC895LP4E
BAND PASS FILTER; No. of Terminals: 24; Width (mm): 4.1; Impedance (Input): 50 OHM; Height: 1 mm; Output Impedance (ohm): 50 OHM;
HMC893LP5E
BAND PASS FILTER; Center/Cutoff Frequency (fo/fc): 7150 MHz; Impedance (Input): 50 OHM; Width (mm): 5.1; Mounting Type: SURFACE MOUNT; Length: 5.1 mm;
HMC891LP5E
BAND PASS FILTER; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 2950 MHz; Mounting Type: SURFACE MOUNT; Impedance (Input): 50 OHM;
HMC896LP4ETR
BAND PASS FILTER; Dimensions: L4.1XB4.1XH1.0 (mm)/L0.161XB0.161XH0.039 (inch); Impedance (Input): 50 OHM; Width (mm): 4.1; Output Impedance (ohm): 50 OHM; Average Input Power: .0063 W;
HMC881ALP5ETR
LOW PASS FILTER; Maximum Frequency: 4000 MHz; No. of Terminals: 32; Minimum Frequency: 0 MHz; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel;
HMC892LP5ETR
BAND PASS FILTER; Length: 5.1 mm; Width (mm): 5.1; Terminal Finish: MATTE TIN; No. of Terminals: 32; Average Input Power: .01 W;
HMC882ALP5ETR
LOW PASS FILTER; Maximum Frequency: 6900 MHz; Connector (Input): SMA; Voltage Standing Wave Ratio: 1.58; Width (mm): 5; No. of Terminals: 32;
HMC894LP5ETR
BAND PASS FILTER; Height: 1 mm; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 8550 MHz; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn);
HMC893LP5ETR
BAND PASS FILTER; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 7150 MHz; Packing Method: TAPE AND REEL; Length: 5.1 mm;
HMC890LP5ETR
BAND PASS FILTER; Average Input Power: .01 W; Height: 1 mm; No. of Terminals: 32; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
HMC895LP4ETR
BAND PASS FILTER; Length: 4.1 mm; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Width (mm): 4.1; Center/Cutoff Frequency (fo/fc): 9700 MHz;
HMC881LP5ETR
LOW PASS FILTER; No. of Terminals: 32; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 3.8 dB; Impedance (Input): 50 OHM;
HMC891LP5ETR
BAND PASS FILTER; Output Impedance (ohm): 50 OHM; Packing Method: TAPE AND REEL; Maximum Operating Temperature: 85 Cel; Impedance (Input): 50 OHM; Length: 5.1 mm;
HMC881ALP5E
LOW PASS FILTER; Maximum Frequency: 4000 MHz; Voltage Standing Wave Ratio: 1.35; Minimum No. of Sections: 1; Minimum Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel;
HMC881LP5E
LOW PASS FILTER; Length: 5.1 mm; Terminal Finish: MATTE TIN; Impedance (Input): 50 OHM; Dimensions: L5.1XB5.1XH1.0 (mm)/L0.201XB0.201XH0.039 (inch); Center/Cutoff Frequency (fo/fc): 2200 MHz;
HMC890LP5E
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Length: 5.1 mm; Dimensions: L5.1XB5.1XH1.0 (mm)/L0.201XB0.201XH0.039 (inch); Terminal Finish: MATTE TIN; Impedance (Input): 50 OHM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved