Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Analog Devices HMC892LP5ETR is a 32-terminal BAND PASS FILTER with a center frequency of 4000 MHz and input impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring high-frequency filtering in compact spaces, such as RF communication systems.
Median Price
$162.400
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
$118.110
10k+ parts
$114.640
Digiode
$175.218
Vyrian
Parana Technologies
$1.003
$0.933
IDEA Electronic Components Group
$1.079
$1.025
DigiPath Technology Company
$1.683
$1.616
AZTECH Wire
$11.290
Ampacity Inc.
$138.040
Corphita
$165.996
Semicontronic
$300.440
$292.929
$291.427
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Vigor
Having 32 terminals allows for versatile connectivity options and compatibility with various systems.
Being a band pass filter allows for precise filtering of signals within a specific frequency range, making it ideal for applications that require targeted signal processing.
With a high maximum operating temperature, this filter can withstand harsh environmental conditions without compromising performance.
The low minimum operating temperature ensures that the filter remains functional even in extreme cold conditions.
The matte tin finish provides corrosion resistance and ensures reliable electrical connections for extended product life.
The compact width of 5.1 mm allows for space-efficient installation in compact electronic devices.
The high center/cutoff frequency of 4000 MHz enables precise signal filtering within a wide frequency range.
With an impedance of 50 Ohm, this filter is compatible with standard electronic systems and ensures efficient signal transfer.
The short length of 5.1 mm further enhances the compact design and ease of installation in electronic circuits.
The output impedance of 50 Ohm ensures compatibility with a wide range of electronic devices and systems for seamless signal transmission.
The low average input power of 0.01 W ensures energy efficiency and helps in reducing power consumption during operation.
The tape and reel packing method provides ease of handling, storage, and assembly of the filters in manufacturing processes.
The surface mounting type simplifies the installation process and allows for compact integration of the filter onto circuit boards.
The small dimensions of L5.1XB5.1XH1.0 mm make this filter suitable for space-constrained applications without compromising performance.
The low height of 1 mm contributes to the overall slim profile of the filter, enabling flexibility in design and installation in compact electronic devices.
General Purpose Electronic Filters HMC892LP5ETR attributes and parameters. Explore more General Purpose Electronic Filters devices from Analog Devices
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Terminal Finish:
Width (mm):
HMC892LP5ETR Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 23/Feb/2015 Updated Revision A 27/Jul/2015
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Goodwork Semiconductor
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
IP5311CX5/LF
NXP Semiconductors
LOW PASS FILTER; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 3005 MHz; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 10 OHM; Package Material: PLASTIC;
LP2816A0512SNTR
KYOCERA AVX
LOW PASS FILTER; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
ACPF-7124-TR1
Broadcom
BAND PASS FILTER; Width (mm): 1.18; Minimum Operating Temperature: -30 Cel; No. of Terminals: 5; Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 2441.5 MHz;
American Technical Ceramics
DATA LINE FILTER; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
ADMV8818SCCZ-EP-P7
Analog Devices
Analog Devices' ADMV8818SCCZ-EP-P7 is a 56-terminal high pass filter with a cutoff frequency of 10 GHz. Operating b/w -55°C to 105°C, it has an input/output impedance of 50Ω. Ideal for surface mount applications in electronic systems requiring precise signal filtering at high frequencies.
ADMV8913SCCZ-EP
HIGH PASS FILTER;
ISL59118IRUZ-T7
Renesas Electronics
LOW PASS FILTER;
DEA162450BT-1295A1
TDK
TDK's DEA162450BT-1295A1 is a 4-terminal BAND PASS FILTER with a center frequency of 2450 MHz and max insertion loss of 2.1 dB. Operating b/w -40°C to 85°C, it has an impedance of 50Ω and is ideal for general purpose electronic filtering in surface mount applications.
IP4337CX18/LF,135
Nexperia
LOW PASS FILTER; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 20; Minimum No. of Sections: 1; Center/Cutoff Frequency (fo/fc): 1900 MHz;
DEA202450BT-1213C1
DEA202450BT-1213C1 by TDK is a BAND PASS FILTER with 4 terminals, operating from -40 to 85 °C. It has a Center Frequency of 2450 MHz, Insertion Loss of 1.5 dB, and compact dimensions (L2.0XB1.25XH0.95 mm). Ideal for electronic applications requiring precise frequency filtering in limited space.
ACPF-7002-TR1
BAND PASS FILTER; Width (mm): 1.6; Dimensions: L2.0XB1.6XH1.0 (mm)/L0.079XB0.063XH0.039 (inch); Maximum Insertion Loss: 3.7 dB; Packing Method: TAPE AND REEL; Output Impedance (ohm): 50 OHM;
DEA202450BT-1294D1-H
TDK's DEA202450BT-1294D1-H is a 4-terminal BAND PASS FILTER with 1.7 dB Max Insertion Loss, operating from -40 to 85°C. Ideal for applications requiring a Center Frequency of 2448 MHz and Voltage Standing Wave Ratio of 1.92, this filter has an Impedance of 50 OHM and can handle up to 1W Average Input Power.
LTC1069-6IS8#PBF
LTC1069-6IS8#PBF by Analog Devices is an 8-terminal low pass filter with a max frequency of 0.02 MHz. Operating temperature ranges from -40°C to 85°C, making it suitable for various applications in general purpose electronic filters. This surface mount device has dimensions of 3.9mm x 4.9mm x 1.752mm and features matte tin terminal finish for optimal performance.
ADMV8913
Analog Devices' ADMV8913 is a 30-terminal high pass filter with 5 dB max insertion loss, 9.5 MHz cutoff frequency, and 50 Ohm input/output impedance. Ideal for general purpose electronic filtering applications, it operates b/w -55 °C to 105°C in surface mount configurations.
LFB182G45BG2D280
Murata Manufacturing
Murata Manufacturing's LFB182G45BG2D280 is a Band Pass Filter with 1.95 dB Max Insertion Loss, 2450 MHz Center Frequency, and 50 OHM Input Impedance. Ideal for electronic applications requiring filtering at temperatures ranging from -40 to 85 °C, this surface mount filter offers a compact size of L1.6XB0.8XH0.65 mm.
HMC881LP5ETR
Analog Devices' HMC881LP5ETR is a 32-terminal low pass filter with a center frequency of 2200 MHz and max insertion loss of 3.8 dB. Operating b/w -40°C to 85°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
ACPF-7141-TR1
BAND PASS FILTER; No. of Terminals: 3; Packing Method: TR, 7 INCH; Minimum Operating Temperature: -30 Cel; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT;
HMC882ALP5ETR
Analog Devices' HMC882ALP5ETR is a 32-terminal LOW PASS FILTER with SMA connectors, operating from -40 to 85 °C. It offers a frequency range of 0-6900 MHz, VSWR of 1.58, and input/output impedance of 50 OHM. Ideal for general purpose electronic filtering in various applications.
4177
Api Technologies
4177 by Api Technologies is a BAND PASS FILTER with a width of 25.4mm and max insertion loss of 6 dB. It has a center/cutoff frequency of 30 MHz and is commonly used in general purpose electronic filters applications.
HMC892LP5ETR
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
HMC896LP4E
BAND PASS FILTER; Height: 1 mm; Output Impedance (ohm): 50 OHM; Width (mm): 4.1; Impedance (Input): 50 OHM; Average Input Power: .0063 W;
HMC892LP5E
BAND PASS FILTER; Minimum Operating Temperature: -40 Cel; Center/Cutoff Frequency (fo/fc): 4000 MHz; Maximum Operating Temperature: 85 Cel; Width (mm): 5.1; Maximum Insertion Loss: 8 dB;
HMC882ALP5E
LOW PASS FILTER; Maximum Frequency: 6900 MHz; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum No. of Sections: 1; Height: .75 mm;
HMC895LP4E
BAND PASS FILTER; No. of Terminals: 24; Width (mm): 4.1; Impedance (Input): 50 OHM; Height: 1 mm; Output Impedance (ohm): 50 OHM;
HMC893LP5E
BAND PASS FILTER; Center/Cutoff Frequency (fo/fc): 7150 MHz; Impedance (Input): 50 OHM; Width (mm): 5.1; Mounting Type: SURFACE MOUNT; Length: 5.1 mm;
HMC891LP5E
BAND PASS FILTER; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 2950 MHz; Mounting Type: SURFACE MOUNT; Impedance (Input): 50 OHM;
HMC896LP4ETR
BAND PASS FILTER; Dimensions: L4.1XB4.1XH1.0 (mm)/L0.161XB0.161XH0.039 (inch); Impedance (Input): 50 OHM; Width (mm): 4.1; Output Impedance (ohm): 50 OHM; Average Input Power: .0063 W;
HMC881ALP5ETR
LOW PASS FILTER; Maximum Frequency: 4000 MHz; No. of Terminals: 32; Minimum Frequency: 0 MHz; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel;
LOW PASS FILTER; Maximum Frequency: 6900 MHz; Connector (Input): SMA; Voltage Standing Wave Ratio: 1.58; Width (mm): 5; No. of Terminals: 32;
HMC894LP5ETR
BAND PASS FILTER; Height: 1 mm; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 8550 MHz; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn);
HMC893LP5ETR
BAND PASS FILTER; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 7150 MHz; Packing Method: TAPE AND REEL; Length: 5.1 mm;
HMC890LP5ETR
BAND PASS FILTER; Average Input Power: .01 W; Height: 1 mm; No. of Terminals: 32; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
HMC895LP4ETR
BAND PASS FILTER; Length: 4.1 mm; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Width (mm): 4.1; Center/Cutoff Frequency (fo/fc): 9700 MHz;
LOW PASS FILTER; No. of Terminals: 32; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 3.8 dB; Impedance (Input): 50 OHM;
HMC891LP5ETR
BAND PASS FILTER; Output Impedance (ohm): 50 OHM; Packing Method: TAPE AND REEL; Maximum Operating Temperature: 85 Cel; Impedance (Input): 50 OHM; Length: 5.1 mm;
HMC881ALP5E
LOW PASS FILTER; Maximum Frequency: 4000 MHz; Voltage Standing Wave Ratio: 1.35; Minimum No. of Sections: 1; Minimum Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel;
HMC881LP5E
LOW PASS FILTER; Length: 5.1 mm; Terminal Finish: MATTE TIN; Impedance (Input): 50 OHM; Dimensions: L5.1XB5.1XH1.0 (mm)/L0.201XB0.201XH0.039 (inch); Center/Cutoff Frequency (fo/fc): 2200 MHz;
HMC890LP5E
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Length: 5.1 mm; Dimensions: L5.1XB5.1XH1.0 (mm)/L0.201XB0.201XH0.039 (inch); Terminal Finish: MATTE TIN; Impedance (Input): 50 OHM;
HMC894LP5E
BAND PASS FILTER; Dimensions: L5.1XB5.1XH1.0 (mm)/L0.201XB0.201XH0.039 (inch); JESD-609 Code: e3; Height: 1 mm; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved