Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol T821110A1S100CEU is a 2-row board connector with 10 contacts, featuring gold flash over nickel finish. It uses brass as contact material and has a terminal pitch of 2.54mm for solder termination. Ideal for applications requiring male connectors in straight mounting style on boards with UL94V-0 flammability rating.
Median Price
$0.266
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
$0.300
100+ parts
$0.272
1k+ parts
$0.254
10k+ parts
-
RS (Exports)
$0.674
$0.318
$0.203
Farnell
$0.205
$0.164
$0.146
Verical
$0.257
Element14
$0.853
$0.776
$0.694
Newark
$0.371
$0.285
TTI Europe
$0.160
Chip1Stop
$0.161
$0.144
Powell Electronics
$0.244
Nova Conductors
$0.251
TME
$0.411
$0.198
Vyrian
NAC Semi
$0.317
$0.292
J2 Sourcing AB
IBS Electronics
$0.265
$0.252
LIBRA Elektronik GmbH
Rutronik
$0.215
$0.196
Avant Electronics Limited
Martec Srl
Sensible Micro Corp
Vicor Industries, Inc.
Ampacity Inc.
$0.128
Semicontronic
$0.125
$0.124
Corohmni
$0.176
Advanced Electronics
$0.181
$0.172
Argo Parts USA
$0.213
$0.207
Gateway Technologies
$0.237
$0.210
Netroflash
$0.239
$0.234
Singapore Electronics
$0.260
$0.241
$0.231
$0.221
Allen Electronics Distributors
$0.600
$0.360
Aztec Data Supply Inc.
$1.111
Continental Prestige Electronics
$0.224
$0.171
GreenTree Electronics
$0.188
Eastek
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
This finish offers excellent conductivity and corrosion resistance, ensuring a reliable connection over time.
Having 2 rows of loaded contacts allows for greater connectivity options and flexibility in the application.
Designed specifically for board-to-board connections, providing a secure and stable connection.
Brass is known for its durability and electrical conductivity, making it an ideal material for contacts in connectors.
This code indicates that the product meets stringent safety standards for flammability, ensuring peace of mind for users.
Having 10 contacts allows for multiple connections to be made within a single connector, increasing versatility.
With a standard pitch size of 2.54mm, this connector is compatible with a wide range of board layouts and designs.
Solder termination provides a strong and permanent connection between the connector and the circuit board, ensuring long-term stability.
Male contacts are commonly used for plug-style connections, offering a secure and reliable fit with female connectors.
The straight mounting style simplifies installation and ensures a neat and organized connection between boards.
Headers & Edge Type Connectors T821110A1S100CEU attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
T821110A1S100CEU Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
1552200253
Molex
WIRE AND CABLE;
Telcom Semiconductor
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Itt Semiconductor
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
B2P-VH-BK(LF)(SN)
J S T Mfg
B2P-VH-BK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and POLYAMIDE66 insulator. It has a dielectric voltage of 1500VAC and operates b/w -25 to 85°C. Ideal for PCB applications requiring a polarized housing with male SQ PIN-SKT contacts.
1-640456-2
TE Connectivity
TE Connectivity 1-640456-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring copper alloy contacts and glass-filled polyester insulator, it has a max operating temperature of 105°C. With a total of 12 contacts, this male plug connector is polarized and rated for 5A signal current.
B14B-PUDSS-1(LF)(SN)
B14B-PUDSS-1(LF)(SN) by J S T Mfg is a 1-row loaded board connector with 14 contacts. It has a terminal pitch of 2mm and uses solder termination. This connector is commonly used in applications requiring male contact gender and straight mounting style.
XHP-2-BK
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: XH; Mating Contact Finish: NOT SPECIFIED;
5031821852
Molex 5031821852 PCB connector has 8 contacts with 0.043" pitch. Made of liquid crystal polymer, it withstands -25 to 85°C. Ideal for commercial applications, offering durability of 10k cycles and male contact gender.
53261-0571
The Molex 53261-0571 is a board connector with a mating contact pitch of 0.049", insulation resistance of 100MΩ, and a max operating temperature of 105°C. It is commonly used in applications requiring surface mount termination and right angle mounting options.
51021-0200
The Molex 51021-0200 is a board connector with 0.049" pitch, 0.167" body length, and POLYBUTYLENE insulation material. It has 2 contacts, operates b/w -40 to 85°C, and features a female crimp termination for cable mounting. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability rating.
2103
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
TSW-106-07-G-S
Samtec
Samtec TSW-106-07-G-S is a 6-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 0.6" x 0.098" x 0.1". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C and meets UL standards.
SSW-102-01-T-D
SSW-102-01-T-D by Samtec is a 2-row, 4-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and phosphor bronze contact material. Ideal for commercial applications requiring a reliable, straight-mount socket connection on PCBs.
53047-1010
Molex 53047-1010 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. Ideal for commercial applications, it features polarized housing, solder termination, and UL94V-0 flammability rating.
B4B-ZR(LF)(SN)
B4B-ZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring male contact gender and solder termination.
FTSH-107-01-L-DV-K-A-P-TR
Samtec's FTSH-107-01-L-DV-K-A-P-TR is a 2-row, 14-contact male board connector with tin finish. Operating from -55 to 125°C, it has a terminal pitch of 1.27mm and mounts on the board surface. Ideal for applications requiring high temperature resistance and secure connections in compact spaces.
851-43-030-30-002000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-002000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. Ideal for use in electronic devices requiring FEMALE SOCKET connectors on PCBs.
DTM06-3S-E007
TE Connectivity's DTM06-3S-E007 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized housing and UL flammability rating of 94V-0.
22-01-2047
The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
43645-0400
Molex 43645-0400 is a board connector with 4 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring durable female connectors with crimp termination in black polyester insulator material.
5-103961-9
TE Connectivity 5-103961-9 is a board connector with 10 contacts, rated at 3A signal current. It features a body length of 2", insulation resistance of 5G ohm, and dielectric voltage of 600VAC. Ideal for applications requiring a temperature range from -65 to +105°C.
50-57-9405
The Molex 50-57-9405 header connector features a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 2200VAC. It is used in board connections with a total of 5 contacts, rated for 3A signal current, and operating temperatures ranging from -40 to +105°C.
851-43-045-10-011000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T821106A1S100CEU
Amphenol
T821106A1S100CEU by Amphenol is a 2-row board connector with gold flash over nickel termination. Featuring 6 contacts, brass material, and UL94V-0 flammability rating, it has a terminal pitch of 2.54mm for solder termination. Ideal for applications requiring male contact gender in straight mounting style on boards.
T821120A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD FLASH OVER NICKEL (50); No. of Rows Loaded: 2; MIL Conformity: NO;
T821116A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Filter Feature: NO; UL Flammability Code: 94V-0;
T821110A1R100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
T821112A1R100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD FLASH OVER NICKEL; Contact Material: BRASS; Filter Feature: NO;
T821108A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD FLASH OVER NICKEL (50); IEC Conformity: NO; Termination Type: SOLDER;
T821126A1S100CEU
Amphenol T821126A1S100CEU is a 26-contact board connector with gold flash over nickel finish. Featuring 2 rows, brass contacts, and 2.54mm terminal pitch, it's ideal for applications requiring male connectors with straight mounting on boards. UL94V-0 rated for high flammability resistance.
T821130A1S100CEU
Amphenol T821130A1S100CEU is a 2-row board connector with 30 contacts. It has gold flash over nickel termination contact finish and brass contact material. This header connector is suitable for applications requiring a straight mounting style and solder termination type.
T821114A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; IEC Conformity: NO; DIN Conformance: NO;
T821112A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; Total No. of Contacts: 12;
T821110A2R100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: T821; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL;
T821110A2S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Contact Material: BRASS; IEC Conformity: NO;
T821110A3R100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54;
T821110A3S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; IEC Conformity: NO; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved