Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol SFW12S-2STE1LF is a 12-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 flammability rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
Median Price
$0.289
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$0.270
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.545
DigiKey
$0.550
$0.397
$0.354
Mouser Electronics
$0.293
$0.272
Newark
$0.614
$0.461
$0.419
Element14
$0.640
$0.513
$0.448
TTI Europe
$0.252
$0.226
Master Electronics
$0.279
$0.264
Verical
$0.285
Powell Electronics
$0.276
$0.256
TTI
$0.273
Future Electronics
$0.250
$0.240
Chip1Stop
$0.433
Farnell
Nova Conductors
$0.331
Vyrian
IBS Electronics
$0.346
Ashlea Components Ltd
NAC Semi
$0.400
$0.369
Rapid Electronics
Ampacity Inc.
$0.212
Semicontronic
$0.207
$0.206
Argo Parts USA
$0.306
$0.297
Bastille Electronics
$0.314
$0.299
$0.295
Corohmni
$0.469
Advanced Electronics
$0.483
$0.459
Continental Prestige Electronics
$0.560
$0.378
Aztec Data Supply Inc.
$1.850
Eastek
GreenTree Electronics
Authorized Procurement Solutions
The small mating contact pitch of 0.039 inches allows for a compact design, making this FFC/FPC connector ideal for applications where space is limited.
The tin termination contact finish provides good electrical conductivity and corrosion resistance, ensuring reliable connections in various environments.
The FFC/FPC connector type is suitable for flexible flat cables, providing a secure and reliable connection for applications requiring flexibility and space-saving designs.
With a UL flammability rating of 94V-0, this connector is flame-resistant and safe to use in applications where fire safety is a concern.
With 12 contacts available, this connector can accommodate a variety of signals or data lines, making it versatile for different applications.
The board mounting type allows for easy and secure installation on a circuit board, providing a stable connection for reliable signal transmission.
The surface mount termination type simplifies the assembly process and ensures a compact and low-profile design, making it suitable for space-constrained applications.
The female contact gender allows for easy mating with male connectors, offering a simple and reliable connection for various electronic devices.
The straight mounting style provides a direct and aligned connection, reducing signal interference and ensuring optimal performance in the application.
Headers & Edge Type Connectors SFW12S-2STE1LF attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol Communications Solutions
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
SFW12S-2STE1LF Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - FFC/FPC series 20/Jul/2011
PCN Packaging - Multiple Devices Package Material Revision 25/Feb/2019 Multiple Devices Packaging Material 31/Jan/2019
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Daco Semiconductor
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Leshan Radio
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
EHR-2
J S T Mfg
EHR-2 by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 3A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulation, operates b/w -25 to 85 °C, and UL94V-0 flammability rating. Ideal for CABLE mounting applications requiring high contact resistance and locking feature.
2013022-1
TE Connectivity
TE Connectivity's 2013022-1 header connector features a mating contact pitch of 0.024", insulation resistance of 50MΩ, and operates b/w -55°C to 85°C. Ideal for board mounting with a total of 204 contacts, this card edge connector is commonly used in commercial applications requiring durable connections.
746-060-520-601
Edac
Edac 746-060-520-601 is a CARD EDGE CONNECTOR with 60 contacts, rated at 3A signal current. It has a mating pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications requiring high reliability in temperatures ranging from -40 to 105°C.
1042240820
Molex
Molex 1042240820 is a PCB connector with 0.1" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for board mounting applications requiring a durable, polarized housing with right-angle socket style connectors.
475532001
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
51021-0800
The Molex 51021-0800 is a board connector with 8 contacts, 0.049" pitch, and 0.463" body length. It has an insulation resistance of 100M ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
5-146280-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 6; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
FTSH-105-01-L-DV-K-A-P-FR
Samtec
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
B9B-PH-K-S(LF)(SN)
B9B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It features POLYAMIDE66 insulation, male SQ PIN-SKT contact style, and press fit termination. Ideal for applications requiring high insulation resistance and UL94V-0 flammability rating in electronic devices.
ZHR-6
ZHR-6 by J S T Mfg is a 6-contact board connector with 0.059" pitch, suitable for applications requiring a polarized housing and crimp termination. With insulation resistance of 500M ohm and operating temperature range from -25 to 85°C, it offers reliable performance in various electronic setups. The UL-certified connector features a female contact gender and rectangular contact pattern, making it ideal for cable mounting scenarios.
43025-2000
The Molex 43025-2000 is a board connector with 20 contacts arranged in S0P20 configuration. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
DM3AT-SF-PEJM5(42)
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5(42) PCB connector features a mating contact pitch of 0.043", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this right-angle male connector has a total of 8 contacts and operates b/w -25°C to 85°C with durability up to 10k cycles.
61303211021
Wuerth Elektronik & Kg
61303211021 by Wurth Elektronik is a BOARD CONNECTOR with 32 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has gold (Au) - nickel (Ni) finish and operates b/w -40 to 125 °C. Ideal for commercial applications requiring high insulation resistance and UL certification.
357-074-422-268
Edac 357-074-422-268 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40°C to +105°C. Ideal for applications requiring high reliability and durability in electronic connections.
BM15B-SRSS-TB(LF)(SN)
BM15B-SRSS-TB(LF)(SN) by J S T Mfg is a 15-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring TIN finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring male contacts, such as in electronics or telecommunications equipment.
803-93-010-20-001000
Mill-max Mfg
Mill-max Mfg 803-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts on a right-angle socket, it's ideal for PCB mounting applications with 2.54mm terminal pitch and solder termination.
PAP-06V-S
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
FTSH-105-01-F-D-K
Samtec's FTSH-105-01-F-D-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
43025-1000
The Molex 43025-1000 is a board connector with 10 contacts arranged in S0P10 pattern. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it features a polyamide insulator, operates b/w -40 to 105°C, and has UL94V-0 flammability rating.
MEC1-130-02-F-D-RA1-SL
Samtec's MEC1-130-02-F-D-RA1-SL is a 2-row, 60-contact card edge connector with a mating contact pitch of 0.039". It features tin termination finish and gold flash over nickel mating finish. Ideal for commercial applications requiring a right-angle, surface-mount female socket connector on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFW12S-2STME1LF
Amphenol Communications Solutions
SFW12S-2STME1LF by Amphenol is a 12-contact FFC/FPC connector with 0.039" pitch, suitable for board mounting with surface mount termination. It offers high insulation resistance of 500M ohm and withstands up to 500VAC dielectric voltage, making it ideal for commercial applications requiring reliable signal connections at temperatures ranging from -55°C to 85°C.
SFW14S-2STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Tin (Sn); Additional Features: TOP ENTRY; Mixed Contacts: NO;
SFW15R-2STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; No. of Rows Loaded: 1; Mixed Contacts: NO;
SFW10S-2STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 1; MIL Conformity: NO; JESD-609 Code: e3;
SFW15R-1STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Filter Feature: NO;
SFW12R-1STE9LF
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 500VAC; Terminal Pitch (mm): .9906; Total No. of Contacts: 12; Insulator Material: GLASS FILLED POLYPHENYLENE SULFIDE;
SFW13R-4STE1LF
SFW13R-4STE1LF by Amphenol is a 13-contact FFC/FPC connector with 0.039" pitch, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for board mounting applications requiring surface mount termination for female contacts.
SFW10R-1STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; UL Flammability Code: 94V-0;
SFW10R-4STE1LF
SFW10R-4STE1LF by Amphenol Communications Solutions is a right angle FFC/FPC connector with a mating contact pitch of 0.039 inches. It has a body length of 0.622 inch and insulation resistance of 500000000 ohm. This connector is suitable for board mounting applications and has a max operating temperature of 105°C.
SFW10R-5STE1LF
SFW10R-5STE1LF by Amphenol is a FFC/FPC connector with 0.039" mating contact pitch, tin termination finish, and phosphor bronze contacts. It has 10 contacts, UL94V-0 flammability rating, and is surface mountable for board applications. Ideal for compact electronic devices requiring reliable signal transmission in tight spaces.
SFW18R-3STAE1LF
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 500VAC; Reference Standard: UL; Maximum Insertion Force (N): ZIF; Insulation Resistance: 500000000 ohm;
SFW12R-1STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e3; No. of Rows Loaded: 1; Termination Type: SURFACE MOUNT;
SFW18S-2STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mixed Contacts: NO; Termination Contact Finish: Tin (Sn);
SFW15S-2STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mating Contact Pitch (inch): 0.039; Mating Contact Finish: NOT SPECIFIED;
SFW14R-2STE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Type: SURFACE MOUNT; MIL Conformity: NO;
SFW12S-2STAE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; No. of Rows Loaded: 1;
SFW12S-2STMAE1LF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; DIN Conformance: NO; MIL Conformity: NO;
SFW12S-2STE1
Fci
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Contact Material: PHOSPHOR BRONZE; UL Flammability Code: 94V-0;
SFW12S-2STME1
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; IEC Conformity: NO; Mounting Style: STRAIGHT;
SFW12S-6STME1
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Additional Features: TOP ENTRY; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved