Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol T821110A1R100CEU is a 10-contact board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. It features gold flash termination finish, 1000000000 ohm insulation resistance, and operates b/w -40 to 105 °C. Ideal for applications requiring high reliability and signal current up to 3A in electronics or telecommunications equipment.
Median Price
$0.538
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.955
100+ parts
$0.533
1k+ parts
$0.394
10k+ parts
-
Element14
$2.910
$2.710
Farnell
$0.391
$0.329
$0.276
Newark
$0.414
Verical
$0.487
Nova Conductors
$0.313
TME
$2.570
$0.450
$0.389
$0.271
Vyrian
Gateway Technologies
$0.278
Argo Parts USA
$0.304
Continental Prestige Electronics
$0.307
Netroflash
Semicontronic
$0.332
$0.324
$0.322
Ampacity Inc.
Singapore Electronics
$0.344
$0.319
$0.306
$0.292
Corohmni
$0.365
Aztec Data Supply Inc.
$4.701
Eastek
Glotronic Ltd.
Abacus Technologies
Having a small mating contact pitch of 0.1 inch allows for a high density of connections, making this product suitable for applications where space is limited.
With a high insulation resistance of 1000000000 ohm, this product ensures reliable and secure electrical connections, reducing the risk of short circuits or electrical failures.
The high dielectric withstanding voltage of 1000VAC makes this connector suitable for applications requiring high voltage capabilities, ensuring safe and reliable performance.
The gold flash finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring a long-lasting and reliable connection.
With a maximum operating temperature of 105°C, this product can withstand high temperature environments, making it suitable for a wide range of applications.
Headers & Edge Type Connectors T821110A1R100CEU attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Connector Type:
Contact Arrangement:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Filter Feature:
Insulation Resistance:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
T821110A1R100CEU Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
4554
Jw Miller Magnetics
Other Semiconductors;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Gec Plessey Semiconductors
General Semiconductor
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Meritek Electronics
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Diodes Incorporated
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
DM1AA-SF-PEJ(72)
Hirose Electric
The Hirose Electric DM1AA-SF-PEJ(72) is a PCMCIA connector with 9 contacts, featuring a mating contact pitch of 0.098". It utilizes liquid crystal polymer insulator material and offers surface mount termination. Ideal for board mounting applications requiring a right angle mounting style.
357-074-422-268
Edac
Edac 357-074-422-268 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40°C to +105°C. Ideal for applications requiring high reliability and durability in electronic connections.
FTSH-105-01-L-DV
Samtec
The Samtec FTSH-105-01-L-DV is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, surface-mountable connector with a UL94V-0 flammability rating.
5103309-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; Mixed Contacts: NO; UL Flammability Code: 94V-0;
09-65-2028
Molex
Molex 09-65-2028 is a board connector with 0.155" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage withstand. Ideal for commercial applications, this male connector features a straight mounting style and solder termination type for durability in temperatures ranging from -40 to 105 °C.
640456-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Contact Material: COPPER ALLOY; Terminal Pitch (mm): 2.54;
BM02B-SRSS-TBT(LF)(SN)
J S T Mfg
BM02B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts, TIN finish, and 94V-0 UL rating. It has 2 contacts for SURFACE mounting, ideal for electronic devices requiring reliable male connectors in STRAIGHT configuration.
B2B-PH-SM4-TBT(LF)(SN)
B2B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with TIN COPPER finish. Featuring 2 contacts, it has a 2mm terminal pitch and is ideal for surface mount applications. With UL 94V-0 flammability rating, this male connector is designed for straight mounting on boards.
35572-0300
Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.
47053-1000
Molex 47053-1000 is a board connector with 4 contacts, featuring a mating pitch of 0.1" and body dimensions of 0.402" x 0.23" x 0.295". It uses matte tin over nickel finish, brass contact material, and polyamide insulator for reliable solder termination in commercial applications.
22-03-5035
The Molex 22-03-5035 is a board connector with a mating contact pitch of 0.098", insulation resistance of 1Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable, polarized housing with male contacts for signal currents up to 3A. The connector has UL94V-0 flammability rating and operates b/w -40°C to 105°C, making it suitable for commercial reliability standards.
54132-3062
Molex 54132-3062 FFC/FPC connector with 30 contacts, 0.020" pitch, and GOLD finish. Ideal for board mounting with POLYAMIDE insulator material. Operating temp -20 to 85 °C, UL94V-0 rated for commercial reliability.
851-43-030-30-001000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-001000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. The connector features FEMALE contact gender and SOCKET body style, suitable for STRAIGHT mounting on boards.
VHR-2N-BK
BOARD CONNECTOR;
26-60-6100
The Molex 26-60-6100 is a board connector with 10 contacts, featuring a dielectric voltage of 1000VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 80°C, it is ideal for commercial applications requiring reliable connections in headers & edge type connectors.
53048-0410
The Molex 53048-0410 is a board connector with 4 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. It has a right angle mounting style and solder termination type, suitable for commercial applications with operating temperatures ranging from -40°C to 85°C.
78172-0004
Molex 78172-0004 is a board connector with 0.047" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a temperature range of -25 to 85 °C and can handle up to 1.5A signal current in cable mounting setups.
823-22-010-10-001101
Mill-max Mfg's 823-22-010-10-001101 is a 2-row, 10-contact board stacking connector with gold over nickel finish. Featuring UL94V-0 flammability rating, it offers straight mounting for solder termination. Ideal for applications requiring reliable connections in electronics and PCB assemblies.
FTSH-107-01-L-DV-K-A
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
51021-0400
The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T821110A1S100CEU
Amphenol
Amphenol T821110A1S100CEU is a 2-row board connector with 10 contacts, featuring gold flash over nickel finish. It uses brass as contact material and has a terminal pitch of 2.54mm for solder termination. Ideal for applications requiring male connectors in straight mounting style on boards with UL94V-0 flammability rating.
T821106A1S100CEU
T821106A1S100CEU by Amphenol is a 2-row board connector with gold flash over nickel termination. Featuring 6 contacts, brass material, and UL94V-0 flammability rating, it has a terminal pitch of 2.54mm for solder termination. Ideal for applications requiring male contact gender in straight mounting style on boards.
T821120A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD FLASH OVER NICKEL (50); No. of Rows Loaded: 2; MIL Conformity: NO;
T821116A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Filter Feature: NO; UL Flammability Code: 94V-0;
T821112A1R100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD FLASH OVER NICKEL; Contact Material: BRASS; Filter Feature: NO;
T821108A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD FLASH OVER NICKEL (50); IEC Conformity: NO; Termination Type: SOLDER;
T821126A1S100CEU
Amphenol T821126A1S100CEU is a 26-contact board connector with gold flash over nickel finish. Featuring 2 rows, brass contacts, and 2.54mm terminal pitch, it's ideal for applications requiring male connectors with straight mounting on boards. UL94V-0 rated for high flammability resistance.
T821130A1S100CEU
Amphenol T821130A1S100CEU is a 2-row board connector with 30 contacts. It has gold flash over nickel termination contact finish and brass contact material. This header connector is suitable for applications requiring a straight mounting style and solder termination type.
T821114A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; IEC Conformity: NO; DIN Conformance: NO;
T821112A1S100CEU
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; Total No. of Contacts: 12;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved