Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJSSE-5381-02 is a Telecom & Datacom Connector with 16 contacts, gold mating finish, and matte tin termination. It has a body length of 1.27", width of 0.525", and depth of 0.72". Ideal for board mounting with polyethylene insulator material, suitable for commercial applications.
Median Price
$2.888
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.957
100+ parts
$2.534
1k+ parts
$2.383
10k+ parts
$2.348
Interstate Connecting
$3.884
$3.382
$3.039
-
DigiKey
$4.790
$3.586
$3.071
$2.755
Newark
$4.880
$4.010
$3.610
TTI Europe
Arrow
$2.460
$2.386
Verical
Chip1Stop
$2.820
$2.510
Master Electronics
$2.570
$2.410
$2.270
Nova Conductors
$2.720
Electro Sonic
$3.512
$2.441
Vyrian
ComSIT Distribution GmbH
NAC Semi
$5.340
$4.930
EMSNET
IBS Electronics
$2.904
$2.666
Bristol Electronics
Sea View Technologies
LIBRA Elektronik GmbH
Prism Electronics
EPE Components Inc.
Ampacity Inc.
$2.020
Aranea Global
$2.559
Gateway Technologies
$2.420
Singapore Electronics
$2.992
$2.782
$2.662
$2.543
Continental Prestige Electronics
$3.520
$2.450
Authorized Procurement Solutions
Perfect Parts
GreenTree Electronics
Abacus Technologies
Eastek
The compact size of the connector makes it suitable for applications with limited space constraints.
The slim design of the connector allows for high-density installations on circuit boards.
The dual-layer finish provides excellent conductivity and durability, ensuring reliable connections.
The moderate depth of the connector offers a good balance between space-saving and ease of handling.
The insulator material offers good electrical properties and reliability in various environmental conditions.
The PEG mounting option securely attaches the connector to the circuit board for stability during operation.
The 20u plating thickness provides enhanced corrosion resistance and longevity for the connector.
The nickel shell finish adds a layer of protection and improves the overall appearance of the connector.
Having multiple ports allows for increased connectivity options and flexibility in networking setups.
This versatile connector is designed for telecom and datacom applications, making it a versatile choice for various networking needs.
The use of phosphor bronze ensures reliable electrical conductivity and durability in the connector.
The gold mating contact finish offers superior signal transmission and resistance to corrosion for long-term performance.
Complying with the UL standard ensures the connector's safety and reliability in different usage scenarios.
With 16 contacts, this connector provides ample connectivity options for various networking requirements.
The board mounting type makes installation straightforward and secure, ensuring a stable connection.
The copper alloy shell material offers a good balance of strength and conductivity for the connector.
The standard terminal pitch allows for compatibility with a wide range of devices and applications.
The rectangular contact pattern ensures a secure and reliable connection between the connector and the circuit board.
The surface mount termination type simplifies the installation process and saves space on the circuit board.
The male contact gender is commonly used for plug connectors and ensures compatibility with female connectors.
The jack-style body or shell design offers a standard interface for connecting with compatible devices.
The right-angle mounting style allows for efficient routing of cables and minimizes space requirements.
The telecom and modular contact style is versatile and widely used in telecommunications and networking applications.
The locking mounting option provides added security and ensures that the connector remains firmly in place during operation.
The guide slot mounting option facilitates easy and accurate installation of the connector on the circuit board.
The commercial reliability of the connector ensures consistent performance and durability in various commercial applications.
Telecom & Datacom Connectors RJSSE-5381-02 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Material:
JESD-609 Code:
Manufacturer Series:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJSSE-5381-02 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Eic Semiconductor
Vishay Telefunken
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Infinex
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Synsemi
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
215877-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Contact Style: TELCOM, MODULAR; IEC Conformity: NO;
449150001
Molex
Molex 449150001 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it has UL94V-0 rated clear polycarbonate insulator and male plug contact style for durability in commercial settings.
651005136421
Wuerth Elektronik & Kg
651005136421 by Wurth Elektronik is a USB connector with a body length of 0.303", body width of 0.156", and body depth of 0.362". It is commonly used in telecom and datacom applications, offering a rated current of 1A and insulation resistance of 1GΩ.
47080-4005
Molex 47080-4005 is a telecom & datacom connector with 0.05" mating contact pitch, 0.691" body length, and 0.23" body width. It features tin termination finish with nickel barrier, UL 94V-0 flammability code, and 15u plating thickness. Ideal for board mounting applications in commercial reliability environments.
2012670005
Molex 2012670005 USB connector features POLYETHYLENE insulator, 24 contacts, and 105°C max operating temp. Ideal for telecom/datacom applications with BOARD MOUNTING FLANGE option and FEMALE contact gender. Designed for durability with STAINLESS STEEL shell material and rated at 5A signal current.
91483-091
Fci
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
RJHSE-5381
Amphenol
Amphenol RJHSE-5381 is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and STAINLESS STEEL shell. It has a matte tin finish with nickel barrier, operates b/w -55 to 85°C, and features a UL 94V-0 flammability code. Ideal for board and panel mounting in commercial applications.
43202-8104
Molex 43202-8104 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its female contact gender, right-angle mounting style, and commercial reliability.
5555165-1
TE Connectivity
TE Connectivity 5555165-1 is a Telecom & Datacom Connector with 0.528" body length, 0.5" width, and 0.5" depth. It has an insulation resistance of 500M ohm and operates b/w -40 to 85°C. Ideal for telecom applications, it features a female contact gender, solder termination type, and UL94V-0 flammability rating.
NE8FDV
Neutrik Ag
NE8FDV by Neutrik Ag is a Telecom & Datacom Connector with 8 contacts, made of Glass Filled Polybutylene Terephthalate-Polyester. It has a temperature range of -30 to 80°C, nickel shell finish, and UL Flammability Code of 94V-0. Ideal for board and panel mounting in telecom and datacom applications.
10136-6000EC
3m Electronic Products Division
10136-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this male plug connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
TTL-232RG-VSW3V3-WE
FTDI
FTDI's TTL-232RG-VSW3V3-WE features USB connector, male contact gender, and operating temp range of -40 to 85°C. Ideal for telecom/datacom connectors with polarized housing and locking mounting option.
749621-7
TE Connectivity 749621-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. It operates b/w -55°C to 105°C, ideal for commercial applications requiring high insulation resistance of 1Gohm. The connector features TIN lead over nickel termination finish and polyethylene insulator material for reliable performance in cable mounting setups.
67329-8001
The Molex 67329-8001 USB connector features a body length of 0.57", insulation resistance of 1000000000 ohm, and dielectric voltage of 1050VAC. Ideal for telecom/datacom applications, this male connector has a gold contact finish, glass-filled polyamide insulator, and is rated for 1500 cycles durability.
USB4155-03-C
Global Connector Technology
USB4155-03-C by Global Connector Technology is a USB connector with 24 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and operates b/w -30 to 85°C. Ideal for telecom & datacom applications due to its durability of 10k cycles and UL flammability rating of 94V-0.
74990111211
74990111211 by Wurth Elektronik is a Telecom & Datacom Connector with gold finish, polyethylene insulator, and nickel shell. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications with a temperature range of -40 to 85°C. This right-angle connector has staggered PCB contact pattern and solder termination for secure connections.
6116526-1
TE Connectivity 6116526-1 is a Telecom & Datacom Connector with 0.625" body length, EMI shielding, and 500M ohm insulation resistance. Ideal for board mounting with POLYAMIDE insulator material, it operates b/w -40 to 85°C.
61729-1011BLF
Amphenol Communications Solutions
Amphenol's 61729-1011BLF is a USB connector with 4 contacts, rated at 1A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1000000000 ohm. Ideal for telecom/datacom applications, it has a durable design with a temperature range from -55 to 85°C.
2294415-1
TE Connectivity 2294415-1 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, 8 contacts, and 1.5A signal current rating. Ideal for board mounting applications in telecom and datacom systems.
RJF22G00
RJF22G00 by Amphenol is a Telecom & Datacom Connector with 8 contacts, CADMIUM shell finish, and -40 to 85°C operating temperature range. It features POLARIZED HOUSING for UL-rated durability in board mounting applications. Ideal for telecom and datacom systems requiring reliable female connectors with staggered PCB contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJSSE-5381
Amphenol RJSSE-5381 is a Telecom & Datacom Connector with 8 contacts. It features a Dielectric Withstanding Voltage of 1400VAC, Matte Tin termination finish, and Gold mating contact finish. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and female contact gender.
RJSSE-5380
RJSSE-5380 by Amphenol is a Telecom & Datacom Connector with dimensions of 0.65" x 0.525" x 0.62". It has an Insulation Resistance of 500M ohm, Dielectric Withstanding Voltage of 1500VAC, and Contact Material made of Phosphor Bronze. Ideal for board mounting in telecom applications, it offers reliable performance with a rated current of 1.5A and operating temperatures from -20°C to 85°C.
RJSSE-5080
The Amphenol RJSSE-5080 is a telecom & datacom connector with dimensions of 0.634" x 0.495" x 0.598". It features 8 contacts, polyethylene insulator, and 20u plating thickness. Ideal for board mounting with right-angle style, suitable for commercial applications meeting UL standards.
RJSSE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: AU ON NI; Terminal Pitch (mm): 1.27; Shell Material: COPPER ALLOY;
RJSSE-5381-01T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Additional Features: LATCHED; UL Flammability Code: 94V-0;
RJSSE-5380-02T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Plating Thickness (inch): 50u; Body Length: 1.27 inch; Mating Contact Finish: NOT SPECIFIED; No. of Ports: 2;
RJSSE-5380-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Insulator Material: POLYETHYLENE; Termination Type: SURFACE MOUNT;
RJSSE-5381-02T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 1.27;
RJSSE-5080-02
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Manufacturer Series: RJSSE;
RJSSE-5081
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
RJSSE-5381-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Shell Material: COPPER ALLOY; Body Width: .525 inch;
RJSSE-5382-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 16; Shell Finish: NICKEL; Contact Material: NOT SPECIFIED;
RJSSE-5382-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Plating Thickness (inch): 20u; Mounting Option-1: LOCKING; Reference Standard: UL;
RJSSE-5382
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Board Mounting Option: PEG; Mounting Style: RIGHT ANGLE; Body Length: .65 inch;
RJSS-5380-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved