Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5-520424-3 is a Telecom & Datacom Connector with 0.05" mating contact pitch, GLASS FILLED POLYCARBONATE insulator, and 500000000 ohm insulation resistance. Ideal for telecom applications, it features a smoke-gray insulator color, male contact gender, and 1.5A signal current rating.
Median Price
$5.772
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Newark
1+ parts
$5.790
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$6.360
$5.630
$5.140
DigiKey
$7.610
$5.493
$4.670
Adafruit Industries
$10.882
$10.338
Master Electronics
$4.890
$4.110
$3.840
Verical
$5.753
$5.071
Chip1Stop
$4.910
Powell Electronics
$4.720
$3.360
Freelance Electronics
$2.236
Digiode
$4.740
Dabergy Inc.
$19.990
Q Components
VNN
Vyrian
Electro Sonic
$5.240
$4.330
$4.290
IBS Electronics
$5.402
$5.487
Rapid Electronics
$5.405
Nova Conductors
TME
Resion
Semicontronic
$3.700
$3.608
$3.589
Corphita
$4.491
Aztec Data Supply Inc.
$4.673
Advanced Electronics
Perfect Parts
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
Assy Fe
Bastille Electronics
The small contact pitch allows for high-density connections, making this connector suitable for telecom and datacom applications with limited space.
The compact body length of the connector enables easy installation in tight spaces while maintaining a reliable connection.
High insulation resistance ensures minimal signal loss and interference, making this connector ideal for high-performance data transmission.
The slim body width offers flexibility in design and layout, allowing for efficient cable management in telecom and datacom systems.
The appropriate body depth provides stability and secure fitment, ensuring reliable and long-lasting connections.
The use of durable and heat-resistant glass-filled polycarbonate insulator material enhances the connector's durability and performance in various operating conditions.
The high maximum operating temperature rating makes this connector suitable for use in demanding environments without risk of overheating.
The low minimum operating temperature ensures the connector's reliability even in harsh, cold conditions, making it a versatile option for different applications.
The presence of an empty shell allows for customization and flexibility in configuring the connector according to specific needs and requirements.
The thick plating thickness provides excellent conductivity and corrosion resistance, ensuring a stable and reliable connection over time.
Telecom & Datacom Connectors 5-520424-3 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Cable Types:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Polarization:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
5-520424-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Lite-on Semiconductor
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1734753-1
TE Connectivity USB Connector 1734753-1 with POLYBUTYLENE TEREPHTHALATE insulator, rated for 1A signal current, and 5000 cycle durability. Ideal for telecom/datacom applications requiring a straight receptacle with SOLDER termination and POLARIZED HOUSING. Operating temperature range from -20 to 60 °C.
USB4125-GF-A
Global Connector Technology
USB4125-GF-A by Global Connector Technology is a USB connector with 6 contacts, rated at 4.25A signal current. It features a dielectric voltage of 100VAC, insulation resistance of 100MΩ, and operates b/w -30°C to 85°C. Ideal for telecom & datacom applications, it has a right-angle mounting style and surface mount termination type.
67643-2911
Molex
Molex 67643-2911 is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1000000000 ohm. Ideal for telecom/datacom applications, this right-angle receptacle has solderable retention clips and operates b/w -40 to 85°C.
6116075-1
TE Connectivity 6116075-1 is a telecom & datacom connector with EMI shielding, UL94V-0 flammability rating, and 8 contacts. It has a right-angle mounting style, solder termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring durable connectors with polarized housing and locking mounting option.
5-554720-3
Commscope
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; IEC Conformity: NO;
3007
Singatron Enterprise
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mixed Contacts: NO; Body or Shell Style: JACK;
47018-2001
Molex 47018-2001 is a Telecom & Datacom Connector with 22 contacts, 0.05" pitch, and 1.592" body length. It has an insulation resistance of 1Gohm and operates b/w -35°C to 85°C. Ideal for commercial applications requiring a reliable right-angle board mount connector with surface mount termination option.
5569381-1
TE Connectivity 5569381-1 is a Telecom & Datacom Connector with EMI shielding, PCT Polyester insulator, and 8 contacts. It operates b/w -40 to 85°C, suitable for telecom applications requiring high insulation resistance and durability of 750 cycles. The right-angle mounting option with solder termination makes it ideal for board and panel installations.
2-5174339-5
TE Connectivity 2-5174339-5 is a Telecom & Datacom Connector with EMI shielding. It has 68 contacts, UL94V-0 rated insulator, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable board-mounted connectors with solder termination.
6-569530-2
6-569530-2 by Commscope is a Telecom & Datacom Connector with Glass Filled Polycarbonate insulator, Nickel shell finish, and Copper Alloy shell material. It has 8 contacts and is a male plug type connector suitable for cable mounting applications.
74320-1003
74320-1003 by Molex is a Telecom & Datacom Connector with 0.075" pitch, 1.45" body length, and 1000000000 ohm insulation resistance. It is used in applications requiring a connector with 29 contacts, right-angle mounting style, and solder termination for commercial reliability.
3-216444-1
TE Connectivity 3-216444-1 is a Telecom & Datacom Connector with POLYAMIDE insulator. It has 4 contacts, rated at 1.5A for signal current. Operating temperature range from -40 to 70°C makes it suitable for various applications in telecom and datacom industries.
7499010121A
Wuerth Elektronik & Kg
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
46765-1001
Molex 46765-1001 is a Telecom & Datacom Connector with 0.256" body length, 200VAC dielectric voltage, and GOLD termination. Ideal for board mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it operates b/w -30 to 85°C. This male connector offers 19 contacts in a right-angle receptacle design for commercial applications.
USB4056-03-A
USB4056-03-A by Global Connector Technology is a USB connector with 24 contacts, rated at 6.25A signal current and durability of 10000 cycles. It features liquid crystal polymer insulation, nickel shell finish, and stainless steel shell material. Ideal for telecom & datacom applications with board mounting option and right-angle mounting style.
629105150921
629105150921 by Wurth Elektronik is a USB connector with dimensions of 0.329" x 0.118" x 0.197". It has an insulation resistance of 1 Gohm, dielectric voltage of 100VAC, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications, it features a female contact gender, surface mount termination type, and matte tin shell finish.
2013499-1
TE Connectivity's 2013499-1 USB connector has a body length of 0.315", insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it features a polarized housing, surface mount termination, and stainless steel shell for durability.
SS-6488S-A-NF-K1
Bel Fuse
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
5557786-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: PCT-POLYESTER; Contact Style: TELCOM, MODULAR; No. of Ports: 1;
477450100
Telecom and Datacom Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5520425-3
TE Connectivity 5520425-3 is a Telecom & Datacom Connector with 0.535" body length, 0.63" width, and 0.65" depth. It has an insulation resistance of 500MΩ and uses POLYBUTYLENE TEREPHTHALATE insulator material. This connector is ideal for telecom and datacom applications requiring a durable, straight-mounting female jack with solder termination.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: TOP ENTRY; Termination Type: SOLDER; Manufacturer Series: 5520425;
5520259-4
TE Connectivity 5520259-4 is a Telecom & Datacom Connector with 0.715" body length, 0.63" width, and 0.65" depth. It has 500M ohm insulation resistance, PBT-POLYESTER insulator material, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications due to its UL-rated design, polarized housing, and solder termination.
5520257-2
TE Connectivity 5520257-2 is a Telecom & Datacom Connector with 0.555" body length, 0.655" width, and 0.65" depth. It has an insulation resistance of 500MΩ and operates b/w -40°C to 85°C. Ideal for telecom applications due to its UL-rated design, black insulator color, and female contact gender.
5520258-3
TE Connectivity 5520258-3 is a Telecom & Datacom Connector with 0.635" body length, 0.655" width, and 0.65" depth. It has an insulation resistance of 500M ohm and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for telecom applications, it features a split board lock mounting option and solder termination type.
5520251-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Polarization Key: POLARIZED HOUSING;
5520260-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 8;
5520250-3
TE Connectivity's 5520250-3 is a Telecom & Datacom Connector with 0.625" body length, 500M ohm insulation resistance, and 0.635" body width. Ideal for board mounting with split board lock option, it features POLYBUTYLENE TEREPHTHALATE insulator material.
5520470-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e3;
5520249-2
TE Connectivity's 5520249-2 is a telecom and datacom connector with a low profile, black insulator color, and a total of 4 contacts. It has a body length of 0.545 inch, body width of 0.637 inch, and body depth of 0.638 inch. The terminal pitch is 1.02mm with a staggered PCB contact pattern. This connector is suitable for general purpose applications and has a reliability rating of commercial.
5520250-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: .625 inch;
5520426-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
5520425-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e3; Body or Shell Style: JACK; Mounting Style: STRAIGHT;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
5-520424-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mains Connector Rating: 1.5A; Termination Contact Finish: NOT APPLICABLE;
5520258-2
TE Connectivity 5520258-2 is a Telecom & Datacom Connector with 0.635" body length, 0.655" width, and 0.65" depth. It features Matte Tin finish, PBT-POLYESTER insulator, and UL94V-0 flammability rating. Ideal for board mounting with split board lock option, this connector has 4 contacts and operates b/w -40°C to 85°C.
5520250-2
TE Connectivity 5520250-2 is a Telecom & Datacom Connector with 0.625" body length, 0.635" width, and 0.635" depth. It features gold termination finish, PBT-POLYESTER insulator material, and 500M ohm insulation resistance. Ideal for telecom applications due to its female contact gender, right angle mounting style, and commercial reliability.
5520252-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 1.02;
5520242-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: SOLDER;
5-520424-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Maximum Wire Size: 24 AWG; Body or Shell Style: PLUG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved