Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJSSE-5380-02 is a Telecom & Datacom Connector with 8+8 contacts, AU ON NI mating finish, and Matte Tin termination. It has a body size of 1.27" x 0.525" x 0.72", suitable for surface mount PCB applications in telecom and datacom systems requiring high reliability.
Median Price
$2.970
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$2.132
100+ parts
-
1k+ parts
$1.660
10k+ parts
Mouser Electronics
$4.170
$3.230
$2.880
$2.810
DigiKey
$4.510
$3.374
$2.889
$2.592
Element14
$4.569
$2.862
Farnell
$4.984
$3.076
$2.751
Avnet
$2.651
$2.452
Chip1Stop
$4.000
Powell Electronics
$2.930
TTI
$2.280
Master Electronics
$2.400
$2.250
$2.120
Verical
$2.824
Nova Conductors
$2.508
Vyrian
Rapid Electronics
$4.391
IBS Electronics
$3.754
Electro Sonic
$2.780
$2.530
$2.270
TME
$4.370
$3.940
Ampacity Inc.
$1.710
Argo Parts USA
Gateway Technologies
$2.232
Singapore Electronics
$2.758
$2.564
$2.454
$2.344
Corohmni
$3.253
Continental Prestige Electronics
$3.290
$2.540
Aztec Data Supply Inc.
$7.490
Perfect Parts
Assy Fe
The compact size of the connector allows for efficient use of space in electronic devices.
This finish provides good conductivity and corrosion resistance, ensuring reliable performance over time.
Polyethylene is a durable and insulating material, providing protection for the internal components of the connector.
The thickness of the plating ensures a strong and reliable connection between the contacts.
Having multiple ports allows for versatility and flexibility in connecting to different devices or systems.
The high number of contacts allows for multiple connections to be made, increasing the functionality of the connector.
Board mounting provides a secure and stable attachment to circuit boards, ensuring a reliable connection.
Copper alloy is known for its high conductivity and durability, making it a reliable choice for the connector's shell.
Surface mount termination allows for easy and efficient installation on circuit boards.
Telecom & Datacom Connectors RJSSE-5380-02 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Filter Feature:
Insulator Material:
JESD-609 Code:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJSSE-5380-02 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Marking chg 21/DEC/2021
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Space Power Electronics
Rfe International
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
925
Keystone Electronics
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
1304
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Empty Shell: NO; Insulator Material: ACRYLONITRILE BUTADIENE STYRENE;
292303-5
TE Connectivity
TE Connectivity's 292303-5 USB connector has a body length of 0.575", insulation resistance of 1Gohm, and operates b/w -55 to 85°C. With a total of 4 contacts, it is used in telecom & datacom applications for board mounting with solderable retention clips.
5555153-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; PCB Contact Pattern: STAGGERED; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3;
1-1734035-2
TE Connectivity 1-1734035-2 USB Connector features Glass Filled Polyamide9T insulator, Nickel finish, and 0.8mm terminal pitch. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and rated current of 1A.
124018312112A
Amphenol Communications Solutions
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Termination Contact Finish: Gold Flash (Au) - with Nickel (Ni) barrier;
RJHSE-3380-A1
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL;
95503-6891
Molex 95503-6891 is a Telecom & Datacom Connector with Insulation Resistance of 500MΩ, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and SPLIT BOARD LOCK mounting option. Ideal for telecom applications due to UL Flammability Code 94V-0, rated current of 1.5A, and total of 8 contacts for commercial reliability.
48391-0003
Molex 48391-0003 USB connector has 0.543"x.208"x.594" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. With UL certification, it's ideal for telecom/datacom applications with 9 contacts, rated at 1.8A signal current, and a durability of 5000 cycles in board mounting configuration.
73725-1110BLF
Amphenol's 73725-1110BLF is a telecom/datacom connector with 0.584" body width and 0.776" depth. Featuring polyethylene insulator, TIN over nickel termination finish, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring a reliable female receptacle with right-angle mounting style.
MRJ-5381-013
Amphenol
Amphenol MRJ-5381-013 is a Telecom & Datacom Connector with 500M ohm Insulation Resistance, 1500 VAC Dielectric Withstanding Voltage, and GOLD OVER NICKEL Termination. Ideal for applications requiring POLYETHYLENE insulator material, PHOSPHOR BRONZE contact material, and 8 contacts in a RECEPTACLE shell style.
LPJG0926HENL
Link-pp Int'l Technology
LPJG0926HENL by Link-pp Int'l Technology is a Telecom & Datacom Connector with dimensions of 0.626" x 0.528" x 0.839". It features 8 gold contacts, phosphor bronze material, and a polarized housing for secure board mounting. Ideal for telecom and datacom applications requiring right angle mounting with solder termination.
HDRA-E68LFDT-SLC
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
2007562-5
TE Connectivity's 2007562-5 is a Telecom & Datacom Connector with -55 to 105°C operating range, 12 ports, and UL94V-0 flammability rating. It has 240 contacts, press-fit termination, and board mounting for telecom and datacom applications.
1903815-1
TE Connectivity USB Connector 1903815-1 with POLYETHYLENE insulator, 1A signal current rating, and 1500 cycles durability. Ideal for telecom/datacom applications, featuring right angle mounting style and solder termination for reliable performance in commercial settings.
95522-2887
Molex 95522-2887 is a Telecom & Datacom Connector with 0.708" body length, 0.655" width, and 0.64" depth. It features insulation resistance of 500M ohm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom/datacom applications due to UL reference standard compliance, male contact gender, and solder termination type.
RJ45-8N4-S
TE Connectivity's RJ45-8N4-S is a telecom & datacom connector with 8 contacts, 1000VAC dielectric voltage, and 50u plating thickness. It features a 0.7" x 0.515" x 0.74" body size, glass-filled polyester insulator, and solder termination. Ideal for board mounting applications in telecommunications and data communication systems.
2024100002
Molex 2024100002 USB connector with 24 contacts, gold finish, and polyethylene insulator. Ideal for telecom/datacom applications requiring waterproof surface mount connectors on boards/panels. Female receptacle with right-angle mounting style ensures secure connections in various environments.
SS-641010-NF-K1
Bel Fuse
Bel Fuse SS-641010-NF-K1 is a 10-contact telecom & datacom connector with 0.605"x.505"x.815" dimensions, POLYETHYLENE insulator, and 30u NICKEL/TIN plating. It features FEMALE contacts, SOLDER termination, and UL 94V-0 flammability rating for board mounting applications in telecommunications and data communication systems.
477450100
Telecom and Datacom Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJSSE-5381
Amphenol RJSSE-5381 is a Telecom & Datacom Connector with 8 contacts. It features a Dielectric Withstanding Voltage of 1400VAC, Matte Tin termination finish, and Gold mating contact finish. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and female contact gender.
RJSSE-5380
RJSSE-5380 by Amphenol is a Telecom & Datacom Connector with dimensions of 0.65" x 0.525" x 0.62". It has an Insulation Resistance of 500M ohm, Dielectric Withstanding Voltage of 1500VAC, and Contact Material made of Phosphor Bronze. Ideal for board mounting in telecom applications, it offers reliable performance with a rated current of 1.5A and operating temperatures from -20°C to 85°C.
RJSSE-5080
The Amphenol RJSSE-5080 is a telecom & datacom connector with dimensions of 0.634" x 0.495" x 0.598". It features 8 contacts, polyethylene insulator, and 20u plating thickness. Ideal for board mounting with right-angle style, suitable for commercial applications meeting UL standards.
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Filter Feature: NO; Mounting Option-1: LOCKING;
RJSSE-5381-01T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Additional Features: LATCHED; UL Flammability Code: 94V-0;
RJSSE-5380-02T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Plating Thickness (inch): 50u; Body Length: 1.27 inch; Mating Contact Finish: NOT SPECIFIED; No. of Ports: 2;
RJSSE-5380-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Insulator Material: POLYETHYLENE; Termination Type: SURFACE MOUNT;
RJSSE-5080-02
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Manufacturer Series: RJSSE;
TELECOM AND DATACOM CONNECTOR;
RJSSE-5081
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
RJSSE-5381-02T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 1.27;
RJSSE-5381-02
Amphenol RJSSE-5381-02 is a Telecom & Datacom Connector with 16 contacts, gold mating finish, and matte tin termination. It has a body length of 1.27", width of 0.525", and depth of 0.72". Ideal for board mounting with polyethylene insulator material, suitable for commercial applications.
RJSSE-5382-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 16; Shell Finish: NICKEL; Contact Material: NOT SPECIFIED;
RJSS-5380-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Filter Feature: NO;
RJSS-5380-04
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved