Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol RJSSE-5080 is a telecom & datacom connector with dimensions of 0.634" x 0.495" x 0.598". It features 8 contacts, polyethylene insulator, and 20u plating thickness. Ideal for board mounting with right-angle style, suitable for commercial applications meeting UL standards.
Median Price
$1.473
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Avnet
1+ parts
$1.151
100+ parts
$0.990
1k+ parts
-
10k+ parts
Heilind Electronics
$1.169
Interstate Connecting
$1.504
$1.212
Mouser Electronics
$1.610
$1.300
$1.160
Chip1Stop
$1.730
$1.063
$1.000
Newark
$1.850
$1.460
$1.410
Element14
$2.032
$1.661
$1.135
DigiKey
$2.070
$1.571
$1.319
$1.192
Farnell
$1.633
Master Electronics
$0.924
$0.896
Verical
$1.210
$1.110
Powell Electronics
$1.170
$1.120
$1.080
Arrow
$0.919
TTI Europe
TTI
$1.140
Future Electronics
$0.875
$0.840
Nova Conductors
$0.975
Rapid Electronics
$1.103
TME
$1.290
$1.100
$1.050
Vyrian
Electro Sonic
$0.904
$0.887
IBS Electronics
$1.243
$1.186
$1.144
Q Components
NAC Semi
$1.400
Bristol Electronics
Cyclops Electronics Ltd
Electronics Depot
Argo Parts USA
$0.947
Continental Prestige Electronics
$0.928
Gateway Technologies
$0.842
Bastille Electronics
$0.926
$0.880
$0.868
Singapore Electronics
$1.041
$0.968
$0.884
Ampacity Inc.
$1.680
Corohmni
$1.681
Aztec Data Supply Inc.
$3.995
Perfect Parts
Authorized Procurement Solutions
GreenTree Electronics
Eastek
A compact body length allows for easy installation in confined spaces or densely populated circuit boards.
The slim body width of this connector enables a high-density layout on the PCB, saving valuable board space.
Polyethylene offers excellent electrical insulation properties, ensuring reliable performance and minimizing signal interference.
The PEG mounting option provides secure and stable attachment to the PCB, reducing the risk of detachment during operation.
A plating thickness of 20u ensures good conductivity and corrosion resistance, leading to a longer lifespan of the connector.
This connector is specifically designed for telecom and datacom applications, ensuring compatibility and reliable signal transmission in these critical systems.
With 8 contacts, this connector allows for multiple data or signal connections, making it versatile for various communication needs.
The board mounting type simplifies installation and maintenance of the connector on the PCB, reducing assembly time and effort.
Surface mount termination offers a secure and reliable connection to the PCB, enhancing electrical performance and minimizing signal loss.
Designed for commercial applications, this connector meets industry standards for reliability and performance, ensuring consistent operation in demanding environments.
Telecom & Datacom Connectors RJSSE-5080 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
RJSSE-5080 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
3001
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; IEC Conformity: NO; Mounting Type: CABLE; DIN Conformance: NO; Mixed Contacts: NO;
95503-2884
Molex 95503-2884 is a Telecom & Datacom Connector with TIN finish, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and COPPER ALLOY contacts. It has 8 contacts, FEMALE gender, and JACK body style for BOARD mounting via SURFACE MOUNT. Ideal for telecom and datacom applications requiring reliable connectivity in compact spaces.
292304-1
TE Connectivity
TE Connectivity's 292304-1 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom & datacom applications with a rated current of 1A, right angle mounting style, and durability of 1500 cycles.
5749069-7
TE Connectivity 5749069-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a temperature range of -55 to 105°C and insulation resistance of 1G ohm. Ideal for telecom applications requiring high reliability and signal currents up to 1A.
5749721-7
TE Connectivity 5749721-7 is a telecom & datacom connector with 68 contacts, 0.05" mating contact pitch, and EMI shielding. It has a body length of 2.515", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission on PCBs with staggered contact patterns.
SS-74301-002
Bel Fuse
Bel Fuse SS-74301-002 is a Telecom & Datacom Connector with 0.68"x.65"x.68" dimensions, matte tin over nickel finish, and polyethylene insulator. It features 2 PCB rows with 8 contacts, staggered pattern on 2.54mm pitch for board mounting applications in commercial settings.
91483-021
Fci
The Fci 91483-021 is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth, made of POLYAMIDE insulator material. Featuring 8 contacts, rated at 3A signal current, it is a female crimp connector suitable for cable mounting applications in telecommunications and data communication systems.
2-6339191-1
TE Connectivity 2-6339191-1 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a right-angle jack body style and surface mount termination for durability in commercial settings.
RJHSE-5381-04
Amphenol
RJHSE-5381-04 by Amphenol is a Telecom & Datacom Connector with 32 contacts, 4 ports, and 2 PCB rows. It features Matte Tin termination finish, Polyethylene insulator material, and Phosphor Bronze contact material. Ideal for board mounting applications in telecom and datacom systems due to its compact dimensions of 2.51" x 0.53" x 0.62".
56579-0519
Molex 56579-0519 is a USB connector with 5 contacts, 0.303" body length, and 0.156" body width. Ideal for telecom/datacom applications, it features GLASS FILLED POLYPHTALAMIDE insulation material and operates b/w -20 to 85°C. With UL certification and 1A signal current rating, it offers reliable performance in commercial settings.
2337993-2
TE Connectivity 2337993-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
DX07S024JJ3R1300
Japan Aviation Electronics Industry
USB CONNECTOR;
1719832042
Molex 1719832042 is a Telecom & Datacom Connector with 42 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.02", matte tin over nickel finish, and glass-filled polyethylene insulator material. Ideal for board mounting applications in telecom and datacom systems, it offers durability up to 250 cycles with a temperature range from -40°C to 80°C.
UJ31-CH-31-SMT-TR
Cui
UJ31-CH-31-SMT-TR by Cui is a USB connector with 24 contacts, rated at 0.25A signal current. It features a right angle mounting style and polyamide9T insulator material. With a dielectric voltage of 100VAC, it's ideal for telecom & datacom applications requiring durability up to 10,000 cycles.
43860-0001
Molex 43860-0001 is a Telecom & Datacom Connector with 0.62" body length, 0.52" width, and 0.59" depth. It features Matte Tin finish, GLASS FILLED POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with 8 contacts, rated at 1.5A signal current.
1546414-4
TE Connectivity's 1546414-4 is a Telecom & Datacom Connector with ABS insulator, operating from -20 to 80°C. Featuring 8 contacts, it supports 1.5A signal current and accepts up to 26 AWG wire size. Ideal for panel mounting in applications requiring female receptacle connectors with solder termination.
5-2301994-3
TE Connectivity 5-2301994-3 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
1-5749111-0
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; UL Flammability Code: 94V-0; Termination Type: IDC;
3-216444-1
TE Connectivity 3-216444-1 is a Telecom & Datacom Connector with POLYAMIDE insulator. It has 4 contacts, rated at 1.5A for signal current. Operating temperature range from -40 to 70°C makes it suitable for various applications in telecom and datacom industries.
RJHSE-5080-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJSSE-5381
Amphenol RJSSE-5381 is a Telecom & Datacom Connector with 8 contacts. It features a Dielectric Withstanding Voltage of 1400VAC, Matte Tin termination finish, and Gold mating contact finish. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and female contact gender.
RJSSE-5380
RJSSE-5380 by Amphenol is a Telecom & Datacom Connector with dimensions of 0.65" x 0.525" x 0.62". It has an Insulation Resistance of 500M ohm, Dielectric Withstanding Voltage of 1500VAC, and Contact Material made of Phosphor Bronze. Ideal for board mounting in telecom applications, it offers reliable performance with a rated current of 1.5A and operating temperatures from -20°C to 85°C.
RJSSE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: AU ON NI; Terminal Pitch (mm): 1.27; Shell Material: COPPER ALLOY;
RJSSE-5080
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Filter Feature: NO; Mounting Option-1: LOCKING;
RJSSE-5381-01T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Additional Features: LATCHED; UL Flammability Code: 94V-0;
RJSSE-5380-02T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Plating Thickness (inch): 50u; Body Length: 1.27 inch; Mating Contact Finish: NOT SPECIFIED; No. of Ports: 2;
RJSSE-5380-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Insulator Material: POLYETHYLENE; Termination Type: SURFACE MOUNT;
RJSSE-5080-02
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Manufacturer Series: RJSSE;
RJSSE-5081
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
RJSSE-5381-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Shell Material: COPPER ALLOY; Body Width: .525 inch;
RJSSE-5381-02T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 1.27;
RJSSE-5382-01T
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Termination Type: SURFACE MOUNT; Mounting Type: BOARD;
RJSSE-5382-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 16; Shell Finish: NICKEL; Contact Material: NOT SPECIFIED;
RJSSE-5382-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Plating Thickness (inch): 20u; Mounting Option-1: LOCKING; Reference Standard: UL;
RJSSE-5382
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Board Mounting Option: PEG; Mounting Style: RIGHT ANGLE; Body Length: .65 inch;
RJSS-5081
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Shell Finish: TIN LEAD;
RJSS-5380
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Body Length: .65 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved