Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJMG20162141BER is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Features gold over nickel mating contact finish, tin termination with nickel barrier, and stainless steel shell material. Ideal for board mounting in applications requiring UL 94V-0 flammability code compliance.
Median Price
$4.568
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$3.927
100+ parts
-
1k+ parts
10k+ parts
$2.697
Mouser Electronics
$7.890
$5.900
$5.200
DigiKey
$8.160
$5.891
$5.259
$4.829
Verical
Chip1Stop
$4.340
Powell Electronics
$4.680
Master Electronics
$4.457
$3.863
Newark
$7.300
Nova Conductors
$4.270
Vyrian
IBS Electronics
$7.149
$6.599
TME
$6.380
$6.150
Electro Sonic
$5.050
$4.410
$4.110
Ampacity Inc.
$3.110
Argo Parts USA
Continental Prestige Electronics
$4.185
Gateway Technologies
$3.800
Bastille Electronics
$4.056
$3.854
Singapore Electronics
$4.696
$4.367
$4.179
$3.991
Corohmni
$7.865
Aztec Data Supply Inc.
$9.259
Perfect Parts
Authorized Procurement Solutions
Having a filter feature helps in reducing noise and interference, ensuring better signal quality and reliability.
The use of Tin with Nickel barrier provides good corrosion resistance and ensures a reliable electrical connection.
Liquid Crystal Polymer is known for its high strength, temperature resistance, and low moisture absorption properties, making the connector durable and reliable.
Specifically designed for telecom and datacom applications, ensuring compatibility and optimal performance in such environments.
Having a UL 94V-0 flammability rating means the connector is highly flame-resistant, making it safer to use in various settings.
Gold over Nickel finish provides superior conductivity, corrosion resistance, and durability, ensuring a reliable mating connection.
With 8 contacts, this connector can support multiple signal or data connections, making it versatile for different applications.
Designed for board mounting, making installation easy and secure, suitable for use in various electronic devices.
Stainless steel shell material provides durability, strength, and resistance to corrosion, ensuring a long-lasting and robust connector.
Solder termination offers a reliable and mechanically strong connection, ensuring stability and longevity in demanding applications.
Female contacts are widely used in connectors for their secure mating connection and versatility in various applications.
Right-angle mounting style allows for space-saving and efficient positioning of the connector, particularly useful in crowded electronic assemblies.
Telecom & Datacom Connectors RJMG20162141BER attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
RJMG20162141BER Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Philips Components
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
RJHSE-5381-A1
Amphenol Communications Solutions
Amphenol RJHSE-5381-A1 is a telecom & datacom connector with 8 contacts, POLYETHYLENE insulator, and TIN shell finish. It operates b/w -55°C to 85°C, suitable for board mounting in telecommunications applications. Featuring a right-angle mounting style and staggered PCB contact pattern, it offers secure solder termination for female connectors.
12401826E412A
The Amphenol Communications Solutions 12401826E412A USB connector features a body length of 0.362", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this connector has a matte tin over nickel finish, black insulator color, and is rated for 5A signal current.
72309-8014BLF
AMPHENOL ICC
Amphenol Icc's 72309-8014BLF is a USB connector with a right angle mounting style. It has a body length of 0.516 inch, insulation resistance of 1G ohm, and dielectric withstand voltage of 750VAC. This connector is commonly used in telecom and datacom applications for board mounting with a hole size of 0.086-0.098 inch.
690-005-299-043
Edac
USB CONNECTOR; Contact Material: PHOSPHOR BRONZE/COPPER ALLOY; Mating Contact Finish: GOLD FLASH OVER NICKEL; Termination Contact Finish: NOT APPLICABLE;
1734035-2
TE Connectivity
TE Connectivity USB Connector 1734035-2 features Matte Tin finish, Glass Filled Polyamide9T insulator, and Stainless Steel shell. Ideal for telecom/datacom applications with 1A signal current rating, UL Flammability Code 94V-0, and right angle mounting style. Operating temperature range -40 to 85°C ensures reliability in commercial settings.
67068-9000
Molex
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
HDRA-E68W2LFDT1EC-SL
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with 0.031" pitch, 1.681" body length, and 1000000000 ohm insulation resistance. It features a POLYPHENYLENE SULFIDE insulator, 250VAC dielectric voltage, and 0.3A signal current rating. Ideal for commercial applications requiring reliable board or panel mounting in right-angle configuration.
500075-0517
The Molex 500075-0517 USB connector features TIN over nickel termination, glass-filled plastic insulator, and copper alloy contacts. Ideal for telecom & datacom applications, this female receptacle has a total of 5 contacts and is mounted on a board using solder termination.
6GK1901-1BB10-2AA0
Siemens
Siemens 6GK1901-1BB10-2AA0 is a telecom and datacom connector with 4 male contacts. It has a metal shell and is designed for cable mounting. This connector is commonly used in telecommunications and data communication applications.
51387-0530
The Molex 51387-0530 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage of 141VAC. Ideal for telecom/datacom applications, it has a surface mount termination type, female contact gender, and operates b/w 0-50°C.
1-292303-1
TE Connectivity 1-292303-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features SOLDERABLE RETENTION CLIPS for board mounting, TIN shell finish, and FEMALE contact gender. Operates b/w -55 to 85°C with UL 94V-0 flammability rating.
47589-1001
The Molex 47589-1001 is a USB connector with 5 contacts and a surface mount termination type. It has an insulation resistance of 1GΩ, dielectric withstand voltage of 100VAC, and can operate in temperatures ranging from -30°C to 85°C. This connector is commonly used in telecom and datacom applications due to its durability (10k cycles) and commercial reliability.
ZX62M-B-5P(30)
Hirose Electric
Hirose Electric's ZX62M-B-5P(30) USB connector features 5 gold-plated contacts, liquid crystal polymer insulator, and stainless steel shell with tin finish. Ideal for telecom/datacom applications, it is a surface mount receptacle with right-angle mounting on board. Compliant with UL 94V-0 flammability code.
177729-3
Tyco Electronics Amp
177729-3 by Tyco Electronics Amp is a TELECOM AND DATACOM CONNECTOR with 240 contacts, NICKEL finish, and STEEL shell. It is used for BOARD mounting and features SOLDER termination. Ideal for telecom and datacom applications requiring high contact density.
1054500101
The Molex 1054500101 is a USB connector with a body length of 0.352", body width of 0.128", and termination contact finish of GOLD. It is commonly used in telecom and datacom applications for board mounting with solder holding posts.
1734366-2
TE Connectivity's 1734366-2 is a USB connector with a body length of 0.571 inch, body width of 0.28 inch, and body depth of 0.591 inch. It is used in telecom and datacom applications, offering a rated current of 1A and durability of 1500 cycles.
RJHSE-5384-04
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; PCB Contact Pattern: STAGGERED;
J0026D21BNL
Pulse Electronics
J0026D21BNL by Pulse Electronics is a telecom and datacom connector with a body length of 0.64 inch, body width of 0.545 inch, and body depth of 0.85 inch. It is used for board and panel mounting in applications such as telecommunications and data communication systems.
6339191-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Polarization Key: POLARIZED HOUSING; Contact Style: TELCOM, MODULAR;
47151-0001
Molex 47151-0001 is a telecom & datacom connector with 19 contacts, TIN BISMUTH finish, and POLYPHENYLENE insulator. It is a surface mount type connector for board mounting applications in telecom and datacom systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJMG2012211A0FR
RJMG2012211A0FR by Amphenol is a Telecom & Datacom Connector with 0.79" body length, 0.507" width, and 0.95" depth. Featuring Pure Tin termination finish, POLYETHYLENE insulator, and GOLD mating contact finish. Ideal for board and panel mounting in telecom and datacom applications due to its polarized housing and staggered PCB contact pattern.
RJMG233022610ER
Amphenol
Amphenol RJMG233022610ER USB connector features gold mating contacts, tin termination finish, and polybutylene terephthalate insulator. Ideal for telecom/datacom applications, it offers a right-angle mounting style on the board with female-to-female contact gender.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE AND FEMALE; Shell Material: STAINLESS STEEL; Empty Shell: NO; PCB Contact Pattern: STAGGERED;
RJMG1BD3B8K1ANR
Amphenol RJMG1BD3B8K1ANR is a Telecom & Datacom Connector with 8 contacts. Features include Tin (Sn) termination, Polyamide/Polyethylene insulator, and Gold Flash over Nickel mating contact finish. Ideal for board mounting in telecom and datacom applications requiring a right-angle jack connector.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Mating Contact Finish: GOLD FLASH OVER NICKEL (100); Termination Type: SOLDER;
RJMG2018344A1ER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2250VDC; Mounting Style: RIGHT ANGLE; Terminal Pitch (mm): 2.54;
RJMG22213216MER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: YES; No. of PCB Rows: 5+5; Minimum Operating Temperature: 0 Cel;
RJMG20162141BER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; JESD-609 Code: e3; Insulator Material: LIQUID CRYSTAL POLYMER;
RJMG2310228A0ER
TELECOM AND DATACOM CONNECTOR;
RJMG-2010-32-61-0NR
RJMG2012228A2ER
RJMG-2010-21-41-0NR
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE/POLYESTER; Shell Finish: NICKEL; Contact Material: PHOSPHOR BRONZE;
RJMG2018311DAER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 70; No. of Ports: 1; Contact Style: TELCOM, MODULAR;
RJMG2018314DAER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Total No. of Contacts: 8; Body Length: .77 inch;
RJMG2018316DAER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 2.03; Filter Feature: YES; Reference Standard: UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved