Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 142138-75 is a RF SMB connector with characteristic impedance of 75 ohm. It features gold shell finish, PTFE insulator material, and brass shell material. Used in commercial applications for board mounting, it has a snap coupling type and solder termination for male contacts.
Median Price
$4.814
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Farnell
1+ parts
$4.688
100+ parts
$3.317
1k+ parts
$2.971
10k+ parts
-
DigiKey
$4.940
$3.567
$3.033
$2.843
Mouser Electronics
$3.560
$3.000
$2.840
Verical
$6.010
$5.290
$4.150
Newark
$6.280
$4.950
$4.700
Element14
$6.600
$5.350
$4.400
Master Electronics
$2.750
$2.500
$2.480
TTI
$3.420
$2.660
$2.470
Powell Electronics
Arrow
$3.451
$2.899
DF Sales Co.
$3.200
Nova Conductors
$3.266
TME
$4.550
$3.410
$3.260
TEDSS.com
$10.200
NAC Semi
$6.330
$5.860
Vyrian
VNN
IBS Electronics
$3.913
$3.296
$3.268
Electro Sonic
$3.500
$2.420
$2.190
North Shore Components
Demsay Elektronik
J2 Sourcing AB
Argo Parts USA
$3.088
Aranea Global
$3.201
$3.073
Gateway Technologies
$2.906
Eastek
$3.490
Singapore Electronics
$3.592
$3.340
$3.196
$3.053
Continental Prestige Electronics
$3.720
$2.710
$2.280
Semicontronic
$5.530
$5.392
$5.364
Aztec Data Supply Inc.
$6.139
Corohmni
$10.821
Authorized Procurement Solutions
GreenTree Electronics
Glotronic Ltd.
Perfect Parts
Robosynatics
Lucentia Tech
Abacus Technologies
Compact size allows for easy installation in tight spaces.
Small width makes it suitable for applications with limited space.
Shallow depth design saves space and allows for neat cable management.
Snap coupling ensures secure connection without the need for additional tools.
High-quality insulator material ensures reliable performance and durability.
Gold shell finish provides excellent conductivity and corrosion resistance.
RF SMB connector for reliable signal transmission in RF applications.
Natural insulator color allows for easy identification in setups.
Board mounting type for secure attachment to circuit boards.
75 ohm impedance for compatibility with standard RF systems.
Brass shell material provides durability and ensures long-term performance.
Solder termination for secure and reliable connections.
Male contact gender for compatibility with female connectors.
Jack style body or shell for easy connection and disconnection.
Straight mounting style for easy integration into setups.
Coaxial contact style for reliable signal transmission.
Long terminal length for secure attachment to cables.
Locking mounting option for added security and stability.
Commercial-grade reliability for consistent performance in various applications.
SSMB Connectors 142138-75 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
142138-75 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS123,215
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
131-1402-101
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); MIL Conformity: NO; Termination Contact Finish: GOLD (30);
131-3303-501
Bel Fuse
Bel Fuse 131-3303-501 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring durable connectors with 4 GHz frequency support. Features include POLYTETRAFLUOROETHYLENE insulator, BRASS shell material, and -65 to 165 °C operating temperature range.
FA1-NCRP-PCB-6A
Amphenol
Amphenol's FA1-NCRP-PCB-6A is a RF SMB connector with 50 ohm impedance, gold over nickel finish, and snap coupling. Ideal for board mounting applications in temperatures ranging from -65 to 125 °C, with a max frequency of 2.5 GHz.
1-1337604-0
TE Connectivity
TE Connectivity 1-1337604-0 is a RF SMB Connector with 50 ohm impedance, suitable for applications up to 4 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it has a temperature range of -65 to 165 °C. Ideal for board mounting, this FEMALE connector has a STRAIGHT JACK body style.
73100-0248
Molex
Molex 73100-0248 is an RF SMB connector with SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for cables, it operates up to 4 GHz with a VSWR of 1.3. Suitable for applications requiring high-frequency signal transmission in various industries.
903-367P-51A2
Amphenol 903-367P-51A2 is a RF SMB connector with 0.3 dB insertion loss, 1.5 VSWR, and 50 ohm impedance. It features gold termination finish, MIL conformity, and PTFE insulator material. Ideal for applications up to 4 GHz requiring snap coupling and right-angle mounting on cables with crimp termination.
R114163000
Radiall S A
Radiall S A R114163000 SSMB Connector with gold-plated contacts, 50 ohm impedance, and 1.25 VSWR is ideal for RF applications up to 4 GHz. Features snap coupling, PTFE insulator, and MIL/IEC conformity. Suitable for cable mounting with female contact gender in a right-angle plug design.
1-2345658-2
TE Connectivity 1-2345658-2 is a SSMB Connector with dimensions of 1.079" x 0.679" x 0.675". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features a polarized SMB connector type. Ideal for applications requiring a female contact gender, crimp termination, and cable mounting.
R114.165.000
R114.165.000 by Radiall S A is a RF SMB CONNECTOR with 50 ohm impedance, GOLD finish, and 1 dB insertion loss. Ideal for applications requiring high durability, it features POLYTETRAFLUOROETHYLENE insulator material and operates b/w -65 to 165 °C at frequencies up to 4 GHz.
R125.680.000W
R125.680.000W by Radiall S A is a RF SMA CONNECTOR with 1 port and 50 ohm characteristic impedance. It has a body length of 0.248 inch, insulation resistance of 5GΩ, and insertion loss of 0.07 dB. This connector is commonly used in commercial applications requiring durability, such as in board mounting for frequencies up to 18 GHz.
R115427000
Radiall S A's R115427000 RF SMB Connector has a characteristic impedance of 50 ohm, gold termination finish, and operates up to 4 GHz. Ideal for board mounting applications in industries requiring MIL and IEC conformity with female contact gender.
131-3693-116
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
5414337-1
TE Connectivity's 5414337-1 RF SMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a 50 ohm Characteristic Impedance, this connector operates b/w -65 to 165 °C with a max frequency of 4 GHz.
A51-451-0000220
A51-451-0000220 by ITT Cannon is an RF SSMB connector with a characteristic impedance of 50 ohm and insertion loss of 0.3 dB. It features a max operating frequency of 4 GHz, making it ideal for commercial applications requiring high-frequency signal transmission on boards. With a durability of 500 cycles and snap coupling type, this connector offers reliable performance in various electronic systems.
413985-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Coupling Type: SNAP; DIN Conformance: NO;
R114426000
The Radiall S A R114426000 is a RF SMB Connector with 50 ohm impedance, 0.06 dB insertion loss, and 1.08 VSWR. It is used in applications requiring high durability, such as in board and panel mounting for up to 4 GHz frequency operations.
FA1-NDRP-PCB-8
The Amphenol FA1-NDRP-PCB-8 is a RF SMB connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 1131VAC, it has a durable zinc alloy shell and operates b/w -65°C to 125°C. Ideal for board mounting in high-frequency electronic systems.
5414363-4
TE Connectivity's 5414363-4 SSMB Connector features 0.25" body diameter, 0.3 dB insertion loss, and 1000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz, it is a female coax plug with right-angle mounting suitable for cables like RG 188 and RG 316.
FA1-NZSJ-C01-0
RF SMB CONNECTOR; Manufacturer Series: FA1;
413985-3
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Filter Feature: NO; Body or Shell Style: PLUG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142138
Amphenol 142138 is an RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator. It has SNAP coupling, suitable for BOARD mounting. Ideal for applications requiring reliable MALE contact in JACK body style.
142194-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Contact Style: COAX; Mounting Type: CABLE; Insulator Material: POLYTETRAFLUOROETHYLENE;
142186-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Characteristic Impedance: 75 ohm; Manufacturer Series: 142186-75;
142194
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Coupling Type: SNAP; Termination Contact Finish: GOLD;
142186
Amphenol's 142186 SSMB Connector features gold termination, snap coupling, and PTFE insulator. Ideal for RF applications, this female connector with crimp solder termination is designed for cable mounting in straight orientation.
142146
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Termination Contact Finish: GOLD;
142134
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Panel Mount: NO; Coupling Type: SNAP;
142191
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Panel Mount: YES; Coupling Type: SNAP;
142187
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: PLUG; Filter Feature: NO;
142138-11
RF SMB CONNECTOR; Reliability: COMMERCIAL; Insulator Color: NATURAL; Shell Material: BRASS; Terminal Length: .154 inch; Contact Style: COAX;
142184-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Terminal Length: .155 inch; Mounting Option-1: LOCKING; Characteristic Impedance: 75 ohm; Termination Contact Finish: NOT APPLICABLE;
142178
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: APPLICABLE CABLES: RG-174/U; RG-188A/U; RG-316/U;
142179
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: BRASS; Cable Types: RG-174/U;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved