Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FA1-NZSP-C01-0 by Amphenol is an RF SMB connector with a nickel shell finish, suitable for RG-174/U cable termination. Its brass shell and PTFE insulator make it ideal for commercial applications requiring reliable female coax connections. The crimp termination and straight plug design offer secure locking mounting options.
Median Price
$3.250
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.450
100+ parts
-
1k+ parts
10k+ parts
Newark
$1.710
Farnell
$2.590
$2.210
RS Americas
$3.310
$2.550
$2.250
Mouser Electronics
$3.420
$2.740
$2.030
$1.950
Vyrian
ACDS - Activité Composants Distribution Service
Bristol Electronics
$1.564
$1.452
Dan-Mar Components
Nova Conductors
Gateway Technologies
$2.125
$1.891
Singapore Electronics
$2.337
$2.173
$2.079
$1.986
Ampacity Inc.
$2.800
Allen Electronics Distributors
$2.920
$2.280
Authorized Procurement Solutions
Netroflash
The use of PTFE for the insulator material ensures high electrical insulation properties and resistance to heat and chemicals, making this product suitable for various applications.
Nickel finish provides corrosion resistance and durability to the connector, ensuring a longer lifespan and reliable performance.
RF SMB connectors are suitable for high-frequency applications, offering good performance in signal transmission and connection reliability.
The natural color of the insulator indicates the use of high-quality materials in manufacturing, ensuring consistency and reliability in performance.
The cable mounting type offers convenience in installation and maintenance, making it easy to connect the connector to various cable types.
Brass shell material provides strong mechanical properties and good conductivity, making the connector robust and efficient in signal transmission.
Compatibility with RG-174/U cable types allows for versatile connectivity options, ensuring the connector can be used in a wide range of applications.
Crimp termination ensures a secure and reliable connection between the cable and connector, reducing signal loss and maintaining signal integrity.
Female contact gender offers compatibility with male connectors, allowing for easy and secure mating with other connector types.
Plug-style body or shell design enables easy insertion and removal of the connector, facilitating quick and efficient connections in various systems.
Straight mounting style ensures alignment and ease of connection, providing a secure and stable interface for reliable signal transmission.
Coaxial contact style is ideal for high-frequency applications, offering low signal loss and impedance matching for efficient signal transmission.
Locking mounting option provides added security and stability to the connection, preventing accidental disconnection and ensuring consistent performance.
Designed for commercial use, this connector offers a balance of performance, durability, and cost-effectiveness, making it a reliable choice for various applications.
SSMB Connectors FA1-NZSP-C01-0 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body or Shell Style:
Cable Types:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
FA1-NZSP-C01-0 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS84-7-F
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Sensitron Semiconductor
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
413990-1
TE Connectivity 413990-1 is a SSMB Connector with 0.25" body length, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell material for durability.
131-1402-116
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: GOLD (30); Insertion Loss: .6 dB; IEC Conformity: NO;
131-3701-811
Bel Fuse
Bel Fuse's 131-3701-811 RF SMB Connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and male contact gender. With durability of 500 cycles, it is ideal for commercial applications requiring a max frequency of 4 GHz in temperatures ranging from -65 to 165°C.
1060455-1
TE Connectivity 1060455-1 is a RF SMB connector with TFE insulator, gold finish, and brass shell. It has a characteristic impedance of 50 ohm, operates from -65 to 165 °C, and can handle up to 4 GHz frequency. Ideal for commercial applications requiring durable connectors with snap coupling.
142134
Amphenol
Amphenol 142134 is a RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring SNAP coupling, FEMALE contact gender, and SOLDER termination.
2FA1-NCRP-PCB-6
RF SMB CONNECTOR; Manufacturer Series: 2FA1-N;
414002-1
TE Connectivity's 414002-1 SSMB Connector features 0.25" body diameter, 0.3 dB insertion loss, and 50 ohm impedance. Ideal for RF applications with RG 174, RG 316, or RG 188 cables. Operating temperature range from -65 to 85°C makes it suitable for various commercial uses.
SX02B2006
Amphenol's SX02B2006 is an RF SMB connector with gold termination, snap coupling, and PTFE insulator. Ideal for board mounting in male contact gender applications. Features jack body style and right-angle mounting suitable for various RF connectivity needs.
73403-5112
Molex
RF SMB/SSMB Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
903-368P-51A1
Amphenol's 903-368P-51A1 SSMB Connector features 0.3 dB insertion loss, GOLD termination, and MIL conformity. Ideal for RF applications up to 4 GHz with a 50 ohm impedance, this right-angle plug connector is suitable for cable mounting with snap coupling.
1-2291392-3
TE Connectivity 1-2291392-3 is an EMI shielded RF SMB connector with dielectric voltage of 800VAC. It has a characteristic impedance of 50 ohm, operates up to 6 GHz, and is suitable for board mounting applications. The connector features a zinc alloy shell, right angle mounting style, and solder termination type.
142210-10
Amphenol 142210-10 is an RF SMB connector with gold shell finish and brass shell material. It features a 0.63" body depth, PTFE insulator, and solder termination. Ideal for commercial applications requiring reliable board mounting in straight configuration.
1-1337604-0
TE Connectivity 1-1337604-0 is a RF SMB Connector with 50 ohm impedance, suitable for applications up to 4 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it has a temperature range of -65 to 165 °C. Ideal for board mounting, this FEMALE connector has a STRAIGHT JACK body style.
R115.427.000
Radiall S A
The Radiall S A R115.427.000 SSMB Connector features gold termination, PTFE insulator, and brass shell for 50 ohm impedance. With a durability of 500 cycles, it is ideal for RF applications up to 4 GHz in commercial settings requiring reliable connections. Operating temperature ranges from -65°C to 165°C make it suitable for various environments.
1-1337476-0
TE Connectivity 1-1337476-0 is a SSMB Connector with threaded coupling, PTFE insulator, and gold shell finish. It operates b/w -65 to 165 °C and has a max frequency of 4 GHz. Ideal for RF applications requiring a male jack connector with 50 ohm impedance.
903-367P-51A
Amphenol 903-367P-51A is an RF SMB Connector with 0.3 dB Insertion Loss, GOLD Termination, and SNAP Coupling. With MIL Conformity, it operates at 4 GHz frequency for applications requiring 50 ohm impedance and POLYTETRAFLUOROETHYLENE insulator material.
131-3693-116
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
131-3711-201
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Mounting Type: BOARD; Coupling Type: SNAP;
142138-75
Amphenol 142138-75 is a RF SMB connector with characteristic impedance of 75 ohm. It features gold shell finish, PTFE insulator material, and brass shell material. Used in commercial applications for board mounting, it has a snap coupling type and solder termination for male contacts.
131-3303-501
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Contact Finish: GOLD (30); Maximum Operating Frequency: 4 GHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FA1-NCRP-PCB-6A
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; Terminal Length: .126 inch; Shell Finish: GOLD;
FA1-NHSJ-C04-0
RF SMB CONNECTOR; Manufacturer Series: FA1;
FA1-NDRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Total No. of Contacts: 1; Contact Style: COAX;
FA1-NBRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; No. of Ports: 1; Contact Style: COAX;
FA1-NBSJ-C04-0
FA1-NKSJ-C01-0
FA1-NZSJ-C01-0
FA1-NCRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Body Width: .32 inch; Additional Features: POLARIZED, VSWR MAX AT: 3 GHZ;
FA1-NISJ-C04-0
FA1-NZSJ-C01-6
RF SMB CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: JACK; Termination Type: CRIMP; Insulator Material: POLYTETRAFLUOROETHYLENE; Body Width: .528 inch;
FA1-NZSP-C04-0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Termination Type: CRIMP; Mounting Type: CABLE; Body or Shell Style: PLUG; Cable Types: RG-58A/U;
FA1-NMSJ-C07-0
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1131VAC; Total No. of Contacts: 1;
FA1-NNSJ-C07-0
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1131VAC; Body Length: .535 inch;
FA1-NZSJ-C07-0
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1131VAC; Characteristic Impedance: 50 ohm;
FA1-NGSJ-C01Y0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1125VAC; Characteristic Impedance: 50 ohm; No. of Ports: 1;
FA1-NKRJ-C04-0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Mounting Option-1: LOCKING; Contact Style: COAX;
FA1-NZRJ-C01-0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1125VAC; Body Length: .394 inch; Total No. of Contacts: 1; Characteristic Impedance: 50 ohm;
FA1-NZRJ-C04-0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
FA1-NZSJ-C01Y0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1125VAC; Body Length: .362 inch; Termination Type: CRIMP;
FA1-NZSJ-C04Y0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1125VAC; Shell Material: BRASS; Termination Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved