Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol FA1-NDRP-PCB-8 is a RF SMB connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 1131VAC, it has a durable zinc alloy shell and operates b/w -65°C to 125°C. Ideal for board mounting in high-frequency electronic systems.
Median Price
$2.446
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.289
100+ parts
$1.962
1k+ parts
$1.845
10k+ parts
$1.818
Chip1Stop
$3.350
-
Farnell
$3.790
$2.230
$2.180
Mouser Electronics
$4.250
$3.060
$2.840
$2.590
DigiKey
$4.310
$3.114
$2.780
$2.439
Element14
$5.860
$3.960
$3.710
TTI Europe
$2.358
$2.133
Arrow
$2.264
Verical
$2.279
Powell Electronics
$2.000
Newark
$3.020
$2.190
Avnet
$2.093
Master Electronics
$2.200
$2.080
$1.980
Electro Sonic
$2.503
$2.142
TME
$3.750
$2.740
$2.370
Component Sense
ComSIT Distribution GmbH
Nova Conductors
Netsource Technology, Inc.
IBS Electronics
$3.432
$3.081
$2.392
Ampacity Inc.
$1.810
Gateway Technologies
$2.131
$1.896
Singapore Electronics
$2.344
$2.179
$2.086
$1.992
Continental Prestige Electronics
$2.640
$1.910
$1.830
Netroflash
Perfect Parts
Compact size allows for efficient use of space in electronic devices.
High dielectric strength ensures safe operation and protection against electrical breakdown.
Provides a sturdy and durable construction for reliable performance.
Snap coupling mechanism allows for quick and easy connection/disconnection, saving time during installation and maintenance.
High-quality insulator material ensures excellent electrical insulation and signal transmission.
Can withstand high temperatures, making it suitable for a wide range of operating conditions.
Can also operate in low-temperature environments, increasing its versatility.
Tin shell finish provides corrosion resistance and durability for long-lasting performance.
RF SMB connector type ensures compatibility with a variety of RF applications.
Low VSWR ensures efficient signal transmission with minimal reflections and losses.
Can withstand multiple connection/disconnection cycles, offering long-term reliability and performance.
Suitable for board mounting, allowing for easy integration into electronic systems.
Compatible with standard 50 ohm impedance systems, ensuring proper signal transmission and reception.
Zinc alloy shell material provides a balance of strength and lightweight construction.
Solder termination offers a secure and reliable connection for optimal performance.
Male contact gender ensures compatibility with female connectors for seamless connection.
Plug style allows for easy and secure connection to corresponding jacks or receptacles.
Right-angle mounting style is space-saving and ideal for applications with limited space.
Coaxial contact style ensures optimal signal transmission and minimal signal loss.
Optimal terminal length for secure connection and signal integrity.
High-frequency capability makes it suitable for a wide range of RF applications.
SSMB Connectors FA1-NDRP-PCB-8 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
FA1-NDRP-PCB-8 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Transys Electronics
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
1-1337482-0
TE Connectivity
TE Connectivity 1-1337482-0 is a RF SMB CONNECTOR with characteristic impedance of 50 ohm. It has PTFE insulator, gold shell finish, and operates b/w -65 to 165 °C. Ideal for applications requiring high frequency up to 4 GHz, such as in board mounting configurations.
142321
Amphenol
The Amphenol 142321 is an RF SMB connector with a gold shell finish and PTFE insulator. It is a female coax plug suitable for semi-rigid cables, solder termination, and panel mounting. This commercial-grade connector offers reliable performance in various applications requiring secure locking connections.
1-2345654-0
TE Connectivity 1-2345654-0 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting. Suitable for applications requiring polarized female connectors with crimp termination.
FA1-NCRP-PCB-8
The Amphenol FA1-NCRP-PCB-8 is a RF SMB connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 1131VAC, it has a durable zinc alloy shell and operates in temperatures ranging from -65 to 125°C. Ideal for board mounting with a snap coupling type, this connector offers low VSWR of 1.5 for reliable signal transmission.
73100-0207
Molex
Molex 73100-0207 is an RF SMB connector with SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 4 GHz frequency range. Male contact gender with solder termination in receptacle shell style.
131-3701-411
Bel Fuse
Bel Fuse 131-3701-411 is an RF SMB connector with 50 ohm impedance, PTFE insulator, and brass shell. It operates b/w -65 to 165 °C, withstands up to 1400VAC, and has a durability of 500 cycles. Ideal for commercial applications requiring reliable connections at frequencies up to 4 GHz.
1-2291392-3
TE Connectivity 1-2291392-3 is an EMI shielded RF SMB connector with dielectric voltage of 800VAC. It has a characteristic impedance of 50 ohm, operates up to 6 GHz, and is suitable for board mounting applications. The connector features a zinc alloy shell, right angle mounting style, and solder termination type.
131-3701-261
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; MIL Conformity: NO; Manufacturer Series: SMB;
413990-1
TE Connectivity 413990-1 is a SSMB Connector with 0.25" body length, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell material for durability.
131-3701-811
Vertiv
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD (30); Coupling Type: SNAP; Termination Type: SURFACE MOUNT;
R114.003.000
Radiall S A
The Radiall S A R114.003.000 SSMB Connector features 0.5 dB insertion loss, gold (Au) termination with Ni barrier, and SNAP coupling type. Ideal for RF applications up to 4 GHz, this male plug connector has a VSWR of 1.46 and 50 ohm impedance, suitable for cable mounting with clamp termination.
5414363-3
TE Connectivity 5414363-3 is a SSMB Connector with 0.25" body diameter, 0.54" depth, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features PTFE insulator, nickel finish, and crimp termination for durability in cable mounting setups.
131-3711-201
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Mounting Type: BOARD; Coupling Type: SNAP;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Coupling Type: SNAP;
131-3693-116
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insertion Loss: .6 dB; Body or Shell Style: PLUG; Termination Contact Finish: NICKEL;
73100-0248
Molex 73100-0248 is an RF SMB connector with SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for cables, it operates up to 4 GHz with a VSWR of 1.3. Suitable for applications requiring high-frequency signal transmission in various industries.
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
R114165000
Radiall S A R114165000 is a RF SMB CONNECTOR with 50 ohm impedance, gold finish, and SNAP coupling. Ideal for applications up to 4 GHz requiring MIL and IEC conformity, featuring POLYTETRAFLUOROETHYLENE insulator material for reliable performance in cable mounting setups.
R114665000W
The Radiall S A R114665000W is a RF SMB connector with gold-plated contacts and PTFE insulator. It has a 50 ohm impedance, operates up to 4 GHz, and features snap coupling for easy installation. Ideal for board mounting in applications requiring MIL and IEC conformity.
131-3303-501
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG 161/U; RG 174, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1.5 GHZ; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FA1-NCRP-PCB-6A
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; Terminal Length: .126 inch; Shell Finish: GOLD;
FA1-NHSJ-C04-0
RF SMB CONNECTOR; Manufacturer Series: FA1;
FA1-NBRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; No. of Ports: 1; Contact Style: COAX;
FA1-NZSP-C01-0
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Shell Material: BRASS; Total No. of Contacts: 1;
FA1-NBSJ-C04-0
FA1-NKSJ-C01-0
FA1-NZSJ-C01-0
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Body Width: .32 inch; Additional Features: POLARIZED, VSWR MAX AT: 3 GHZ;
FA1-NISJ-C04-0
FA1-NARP-PCB-6A
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Durability: 100 Cycles; Filter Feature: NO; JESD-609 Code: e4;
FA1-NBRP-PCB-9
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Body Length: .405 inch; Mounting Type: BOARD;
FA1-NDRP-PCB-6A
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Contact Finish: GOLD (30) OVER NICKEL (80); Body Width: .315 inch;
FA1-NDRP-PCB-9
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Durability: 100 Cycles; Contact Style: COAX;
FA1-NERP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Maximum Operating Temperature (Cel): 125; JESD-609 Code: e4;
FA1-NGRP-PCB-6A
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Termination Type: SOLDER; Body Width: .315 inch;
FA1-NHRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Mating Contact Finish: NOT SPECIFIED; Voltage Standing Wave Ratio: 1.5;
FA1-NKRP-PCB-6A
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .405 inch; Characteristic Impedance: 50 ohm; Shell Material: ZINC ALLOY;
FA1-NKRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Maximum Operating Temperature (Cel): 125; IEC Conformity: NO;
FA1-NLRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Body Width: .32 inch; Maximum Operating Temperature (Cel): 125;
FA1-NMRP-PCB-8
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1131VAC; Voltage Standing Wave Ratio: 1.5; Termination Contact Finish: GOLD (30);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved