Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1131VAC; Body Length: .535 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$1.000
100+ parts
1k+ parts
$0.890
10k+ parts
Singapore Electronics
$1.100
$1.023
$0.979
$0.935
SSMB Connectors FA1-NNSJ-C07-0 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
Insulator Material:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
FA1-NNSJ-C07-0 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Semitron
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Semtech
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
414002-1
TE Connectivity
TE Connectivity's 414002-1 SSMB Connector features 0.25" body diameter, 0.3 dB insertion loss, and 50 ohm impedance. Ideal for RF applications with RG 174, RG 316, or RG 188 cables. Operating temperature range from -65 to 85°C makes it suitable for various commercial uses.
131-3701-411
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; MIL Conformity: NO; JESD-609 Code: e4;
1-2291392-3
TE Connectivity 1-2291392-3 is an EMI shielded RF SMB connector with dielectric voltage of 800VAC. It has a characteristic impedance of 50 ohm, operates up to 6 GHz, and is suitable for board mounting applications. The connector features a zinc alloy shell, right angle mounting style, and solder termination type.
R115.427.000
Radiall S A
The Radiall S A R115.427.000 SSMB Connector features gold termination, PTFE insulator, and brass shell for 50 ohm impedance. With a durability of 500 cycles, it is ideal for RF applications up to 4 GHz in commercial settings requiring reliable connections. Operating temperature ranges from -65°C to 165°C make it suitable for various environments.
73100-0207
Molex
Molex 73100-0207 is an RF SMB connector with SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 4 GHz frequency range. Male contact gender with solder termination in receptacle shell style.
SMB6251B1-3GT30G-50
Amphenol
Amphenol's SMB6251B1-3GT30G-50 is an RF SMB connector with gold over nickel finish. Featuring snap coupling, it has a polytetrafluoroethylene insulator for board mounting via solder termination. Ideal for applications requiring female plug connectors in straight mounting style.
1-2345654-0
TE Connectivity 1-2345654-0 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting. Suitable for applications requiring polarized female connectors with crimp termination.
5414337-1
TE Connectivity's 5414337-1 RF SMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a 50 ohm Characteristic Impedance, this connector operates b/w -65 to 165 °C with a max frequency of 4 GHz.
R114.203.000
The Radiall S A R114.203.000 SSMB Connector features 0.5 dB insertion loss, GOLD OVER NICKEL termination, and SNAP coupling type. With a 50 ohm impedance and 4 GHz operating frequency, it is ideal for RF applications requiring high-quality signal transmission in cable assemblies.
R114.082.000
Radiall S A's R114.082.000 is a RF SMB Connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.41 VSWR. Ideal for applications requiring high durability, it features gold-plated contacts, PTFE insulator, and operates b/w -65 to 165 °C at frequencies up to 4 GHz.
R114.075.000
R114.075.000 by Radiall S A is a RF SMB CONNECTOR with 50 ohm impedance, 0.5 dB insertion loss, and 1.41 VSWR. It is ideal for applications requiring high durability, such as in commercial settings where it can withstand up to 500 cycles at temperatures ranging from -65 to 165 °C. The connector features gold-plated contacts with nickel barrier for reliable signal transmission in RG-316 cables.
131-1402-101
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Manufacturer Series: SMB;
R117186807
Radiall S A R117186807 is a RF SMB CONNECTOR with 50 ohm impedance, 1 dB insertion loss, and 1.25 VSWR. It features gold termination with nickel barrier, MIL and IEC conformity, suitable for applications up to 4 GHz requiring SNAP coupling and CRIMP termination in a RIGHT ANGLE PLUG configuration.
131-1402-116
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Maximum Operating Frequency: 4 GHz; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE;
R114.005.000
Radiall S A's R114.005.000 is an RF SMB connector with a max operating frequency of 4 GHz. It has a low insertion loss of 0.5 dB and a voltage standing wave ratio of 1.41, making it suitable for high-frequency applications in the telecommunications industry.
131-3303-501
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG 161/U; RG 174, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1.5 GHZ; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
413985-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Coupling Type: SNAP; DIN Conformance: NO;
142191
Amphenol 142191 is an RF SMB Connector with gold termination, panel mountable, and snap coupling. It features PTFE insulator for high performance. Ideal for male contact gender applications requiring crimp termination on cable or panel mounting in straight configuration.
TE Connectivity's 413985-1 SSMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 4 GHz with 50 ohm impedance, it supports RG 316, RG 188, and RG 174 cables in temperatures ranging from -65 to 165 °C.
73100-0103
73100-0103 by Molex is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1.3 VSWR. Ideal for board mounting in applications up to 4 GHz requiring reliable commercial-grade connectors with gold/nickel finish and PTFE insulator.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved