Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 142194 SSMB Connector features gold termination, snap coupling, and PTFE insulator. Ideal for RF applications, this male plug connector is designed for cable mounting with crimp solder termination in a right-angle style.
Median Price
$6.094
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
NEP Electronics
1+ parts
$5.000
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$5.960
$4.290
TTI Europe
$6.007
$4.446
$4.359
Farnell
$6.050
$5.490
Heilind Electronics
$6.137
$4.949
$4.794
Interstate Connecting
$6.148
$5.108
$4.812
Avnet
$6.243
$4.634
$4.150
TTI
$7.790
$5.800
$4.960
$4.900
DigiKey
$7.980
$5.765
$4.901
Mouser Electronics
$8.990
$7.160
$5.670
Element14
$9.280
$7.350
$6.920
Master Electronics
$5.440
$4.380
$4.360
Arrow
$4.877
$4.497
Powell Electronics
$5.100
$3.920
$3.660
Verical
Nova Conductors
DF Sales Co.
$5.070
TME
$6.790
$5.550
TestEquity
$7.890
VNN
IBS Electronics
$7.630
$6.143
$6.115
Vyrian
Electro Sonic
$4.570
$3.720
$3.510
Cogito LLC
Semi Source
Q Components
SPM Sales
American Microsemiconductor Inc.
Microwave Components, LLC
Ampacity Inc.
$4.250
Gateway Technologies
$3.880
Argo Parts USA
Singapore Electronics
$4.796
$4.460
$4.268
$4.076
Continental Prestige Electronics
$7.190
$5.880
Kepictronics
Perfect Parts
Bastille Electronics
Gold plating provides excellent conductivity and corrosion resistance, ensuring a reliable connection over time.
Snap coupling allows for quick and easy connection, saving time during installation or maintenance.
PTFE insulator material offers high temperature resistance and excellent dielectric properties, ensuring stable performance in demanding environments.
RF SMB connectors are commonly used in high frequency applications, providing good electrical performance for RF signals.
Cable mounting allows for a secure and reliable connection to a cable, making it ideal for applications where the connector needs to be attached directly to a cable.
Crimp solder termination provides a strong and durable connection, ideal for applications where the connector may be subject to vibration or mechanical stress.
Male contacts are typically used for plug connectors, allowing for a secure connection to female connectors.
Plug style connectors are easy to connect and disconnect, making them convenient for applications where frequent changes or maintenance are required.
Right angle mounting allows for space-saving installation in tight or limited spaces, providing flexibility in design and layout.
SSMB Connectors 142194 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
142194 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5305-99-136-5055, 5305991365055, 5895-13-117-7293, 5895131177293, 5920-14-527-3436, 5920145273436, 5935-01-590-8568, 5935015908568
NIIN
991365055, 131177293, 145273436, 015908568
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
ROHM
NXP Semiconductors
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Bkc Semiconductors
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Dc Components
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
142191
Amphenol
Amphenol 142191 is an RF SMB Connector with gold termination, panel mountable, and snap coupling. It features PTFE insulator for high performance. Ideal for male contact gender applications requiring crimp termination on cable or panel mounting in straight configuration.
R114.163.000
Radiall S A
R114.163.000 by Radiall S A is an RF SMB CONNECTOR with 1 dB Insertion Loss, GOLD OVER NICKEL Termination Contact Finish, and SNAP Coupling Type. It has a max operating frequency of 4 GHz and is ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in right angle configurations.
131-1402-116
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: GOLD (30); Insertion Loss: .6 dB; IEC Conformity: NO;
903-368P-51A1
Amphenol's 903-368P-51A1 SSMB Connector features 0.3 dB insertion loss, GOLD termination, and MIL conformity. Ideal for RF applications up to 4 GHz with a 50 ohm impedance, this right-angle plug connector is suitable for cable mounting with snap coupling.
R115427000
Radiall S A's R115427000 RF SMB Connector has a characteristic impedance of 50 ohm, gold termination finish, and operates up to 4 GHz. Ideal for board mounting applications in industries requiring MIL and IEC conformity with female contact gender.
2FA1-NCRP-PCB-6
RF SMB CONNECTOR; Manufacturer Series: 2FA1-N;
131-3701-411
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
131-1402-101
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Manufacturer Series: SMB;
1-1337478-0
TE Connectivity 1-1337478-0 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 4 GHz max operating frequency. Ideal for applications requiring high-frequency signal transmission in environments with temperatures ranging from -65 to 165 °C. Suitable for KX 22A and KX 3B cable types, featuring a right-angle mounting style.
1-2345654-1
TE Connectivity 1-2345654-1 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40°C to 125°C, and features polarized SMB connector type. Ideal for cable mounting applications with crimp termination, suitable for 115/230VAC mains connectors.
R114165000
Radiall S A R114165000 is a RF SMB CONNECTOR with 50 ohm impedance, gold finish, and SNAP coupling. Ideal for applications up to 4 GHz requiring MIL and IEC conformity, featuring POLYTETRAFLUOROETHYLENE insulator material for reliable performance in cable mounting setups.
SMB7H-J-P-H-RA-TH1
Samtec
Samtec's SMB7H-J-P-H-RA-TH1 is a RF SMB connector with gold over nickel finish, snap coupling type, and PTFE insulator. Ideal for applications requiring 75 ohm impedance, it operates b/w -65 to 165 °C with VSWR of 1.3 up to 4 GHz frequency on board mounting in right angle configuration.
R114665000
The Radiall S A R114665000 SSMB Connector features 0.5 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it offers gold termination with nickel barrier for reliable signal transmission in board and panel mounting setups.
1-1337476-0
TE Connectivity 1-1337476-0 is a SSMB Connector with threaded coupling, PTFE insulator, and gold shell finish. It operates b/w -65 to 165 °C and has a max frequency of 4 GHz. Ideal for RF applications requiring a male jack connector with 50 ohm impedance.
SMB1252B1-3GT30G-50
Amphenol SMB1252B1-3GT30G-50 is an RF SMB connector with gold over nickel finish. It features snap coupling, PTFE insulator, and solder termination. Ideal for board mounting applications requiring male contact gender in a right-angle jack configuration.
5414337-1
TE Connectivity's 5414337-1 RF SMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a 50 ohm Characteristic Impedance, this connector operates b/w -65 to 165 °C with a max frequency of 4 GHz.
R114.186.000
The Radiall S A R114.186.000 SSMB Connector features 1 dB insertion loss, 1000VAC dielectric voltage, and 50 ohm impedance for RF applications up to 4 GHz. With a gold over nickel finish and PTFE insulator, it is ideal for commercial use in cables with RG-179 type connectors requiring male contact gender and crimp termination. Operating temperatures range from -65 to 165°C with durability of 500 cycles.
73100-0103
Molex
73100-0103 by Molex is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1.3 VSWR. Ideal for board mounting in applications up to 4 GHz requiring reliable commercial-grade connectors with gold/nickel finish and PTFE insulator.
414002-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1060455-1
TE Connectivity 1060455-1 is a RF SMB connector with TFE insulator, gold finish, and brass shell. It has a characteristic impedance of 50 ohm, operates from -65 to 165 °C, and can handle up to 4 GHz frequency. Ideal for commercial applications requiring durable connectors with snap coupling.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142138-75
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .276 inch; Filter Feature: NO;
142138
Amphenol 142138 is an RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator. It has SNAP coupling, suitable for BOARD mounting. Ideal for applications requiring reliable MALE contact in JACK body style.
142194-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Contact Style: COAX; Mounting Type: CABLE; Insulator Material: POLYTETRAFLUOROETHYLENE;
142186-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Characteristic Impedance: 75 ohm; Manufacturer Series: 142186-75;
142186
Amphenol's 142186 SSMB Connector features gold termination, snap coupling, and PTFE insulator. Ideal for RF applications, this female connector with crimp solder termination is designed for cable mounting in straight orientation.
142146
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Termination Contact Finish: GOLD;
142134
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Panel Mount: NO; Coupling Type: SNAP;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Panel Mount: YES; Coupling Type: SNAP;
142187
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: PLUG; Filter Feature: NO;
142146-75
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE;
142115
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: GOLD; Termination Type: CRIMP SOLDER; Mounting Style: RIGHT ANGLE; MIL Conformity: NO;
142120
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Style: STRAIGHT; Coupling Type: SNAP;
142139
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; JESD-609 Code: e4; Mating Contact Finish: GOLD;
142144
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: JACK; Panel Mount: NO; Termination Contact Finish: GOLD;
142178
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: APPLICABLE CABLES: RG-174/U; RG-188A/U; RG-316/U;
142190
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: JACK; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD;
142192
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: JACK; DIN Conformance: NO; IEC Conformity: NO;
142193
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE; Panel Mount: NO;
142195
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Panel Mount: NO; Mounting Type: CABLE;
142.11.1520.005
Ims Connector Systems
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; IEC Conformity: YES; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved