Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 142134 is a RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring SNAP coupling, FEMALE contact gender, and SOLDER termination.
Median Price
$6.042
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$5.795
100+ parts
$5.313
1k+ parts
-
10k+ parts
TTI
$5.990
$4.520
$3.920
Farnell
$6.130
$4.090
$3.910
Mouser Electronics
$7.570
$5.640
$4.960
DigiKey
$7.820
$5.646
$4.800
Element14
$10.430
$7.210
$6.700
Newark
$61.990
Arrow
$5.189
$4.778
Master Electronics
$4.450
$4.130
$4.120
Powell Electronics
$5.680
$4.390
$4.050
Verical
$6.095
$5.855
TTI Europe
$4.320
$4.084
TME
$7.080
$5.370
TestEquity
$7.680
Electro Sonic
$4.400
$3.580
$3.400
NAC Semi
$10.980
$10.140
IBS Electronics
$5.891
$5.456
$5.372
VNN
Netsource Technology, Inc.
Prism Electronics
Bristol Electronics
Semtec, LLC
Nova Conductors
Resion
Ampacity Inc.
$3.670
Continental Prestige Electronics
$5.570
$4.020
$3.830
Eastek
$6.068
Gateway Technologies
$59.311
$52.786
Singapore Electronics
$65.242
$60.675
$58.065
$55.455
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
Netroflash
GreenTree Electronics
Abacus Technologies
Speed Components Ltd (Excess)
Gold plating ensures excellent conductivity and durability, making this connector suitable for high frequency applications.
Snap coupling type allows for quick and easy connections, making it convenient for applications where rapid installation or change is required.
Polytetrafluoroethylene provides excellent dielectric properties and high temperature resistance, ensuring stable performance in demanding environments.
RF SMB connector is commonly used in RF applications due to its compact size and excellent electrical performance, making it a versatile choice for various applications.
Gold plating on mating contacts ensures low contact resistance and high durability, maintaining signal integrity over multiple mating cycles.
Board mounting type allows for easy integration onto circuit boards, providing a secure and reliable connection for RF signals.
50 ohm characteristic impedance is common in RF applications, ensuring proper signal transmission and minimizing signal distortion.
Solder termination type ensures a secure and reliable connection, suitable for applications where vibration or mechanical stress may be present.
Female contact gender is versatile and allows for connections with various types of mating connectors, providing flexibility in system design.
Plug body style is ideal for applications where frequent connections and disconnections are needed, providing ease of use and reliability.
Straight mounting style provides a direct and straightforward connection, suitable for applications where signal flow direction is important.
SSMB Connectors 142134 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
142134 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5310-99-963-2414, 5310999632414, 6515-01-511-4703, 6515015114703
NIIN
999632414, 015114703
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Philips Semiconductors
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
73100-0248
Molex
Molex 73100-0248 is an RF SMB connector with SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for cables, it operates up to 4 GHz with a VSWR of 1.3. Suitable for applications requiring high-frequency signal transmission in various industries.
142321
Amphenol
The Amphenol 142321 is an RF SMB connector with a gold shell finish and PTFE insulator. It is a female coax plug suitable for semi-rigid cables, solder termination, and panel mounting. This commercial-grade connector offers reliable performance in various applications requiring secure locking connections.
142210-10
Amphenol 142210-10 is an RF SMB connector with gold shell finish and brass shell material. It features a 0.63" body depth, PTFE insulator, and solder termination. Ideal for commercial applications requiring reliable board mounting in straight configuration.
1060455-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Termination Type: SOLDER; Coupling Type: SNAP; IEC Conformity: NO; Body or Shell Style: RECEPTACLE;
R114005000
Radiall S A
The Radiall S A R114005000 SSMB Connector features low insertion loss of 0.05 dB and gold termination contact finish. With MIL and IEC conformity, it has a snap coupling type for RF SMB applications up to 4 GHz frequency range. Ideal for cable mounting with 50 ohm impedance, this female plug connector offers reliable performance in various RF systems.
131-1402-116
Vertiv
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; Body Depth: .545 inch; IEC Conformity: NO;
R114.665.000
Radiall S A R114.665.000 is a RF SMB Connector with 50 ohm impedance, gold-plated contacts, and PTFE insulator for high durability. Ideal for applications requiring panel mounting, withstanding voltage up to 1400VAC, and operating temperatures from -65 to 165°C.
131-3303-501
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Body or Shell Style: JACK; Mounting Type: CABLE AND PANEL;
903-499J-51P2
Amphenol 903-499J-51P2 is a SSMB connector with 0.3 dB insertion loss, 50 ohm impedance, and 1400VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features gold-plated brass contacts and PTFE insulator for durability in commercial settings.
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG 161/U; RG 174, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1.5 GHZ; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
903-512J-71P
Amphenol 903-512J-71P is a RF SMB connector with 0.3 dB insertion loss, gold termination finish, and snap coupling. Ideal for board mounting in applications requiring 75 ohm impedance up to 4 GHz frequency. Features male contact gender, PTFE insulator material, and zinc alloy shell for reliable commercial use.
R117186807
Radiall S A R117186807 is a RF SMB CONNECTOR with 50 ohm impedance, 1 dB insertion loss, and 1.25 VSWR. It features gold termination with nickel barrier, MIL and IEC conformity, suitable for applications up to 4 GHz requiring SNAP coupling and CRIMP termination in a RIGHT ANGLE PLUG configuration.
1060464-1
TE Connectivity
TE Connectivity's 1060464-1 SSMB Connector features a body size of 0.25" x 0.25" x 0.525", PTFE insulation, and gold shell finish. Ideal for RF applications with a characteristic impedance of 50 ohm, operating up to 4 GHz. Suitable for commercial use with durability of 500 cycles in board mounting configurations.
131-3701-261
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Coupling Type: SNAP;
5414337-1
TE Connectivity's 5414337-1 RF SMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a 50 ohm Characteristic Impedance, this connector operates b/w -65 to 165 °C with a max frequency of 4 GHz.
73100-0256
Molex 73100-0256 SSMB Connector features gold/nickel termination, PTFE insulator, and beryllium copper contact. Ideal for RF applications up to 4 GHz with 1.1 VSWR, this right-angle plug connector has a characteristic impedance of 75 ohm and male gender for cable mounting via crimp termination.
FA1-NZSP-C01-0
FA1-NZSP-C01-0 by Amphenol is an RF SMB connector with a nickel shell finish, suitable for RG-174/U cable termination. Its brass shell and PTFE insulator make it ideal for commercial applications requiring reliable female coax connections. The crimp termination and straight plug design offer secure locking mounting options.
R115.427.000
The Radiall S A R115.427.000 SSMB Connector features gold termination, PTFE insulator, and brass shell for 50 ohm impedance. With a durability of 500 cycles, it is ideal for RF applications up to 4 GHz in commercial settings requiring reliable connections. Operating temperature ranges from -65°C to 165°C make it suitable for various environments.
73100-0103
73100-0103 by Molex is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1.3 VSWR. Ideal for board mounting in applications up to 4 GHz requiring reliable commercial-grade connectors with gold/nickel finish and PTFE insulator.
5415006-1
TE Connectivity 5415006-1 is an RF SMB connector with 50 ohm impedance, 0.3 dB insertion loss, and 1.25 VSWR. Ideal for commercial applications, it has a durability of 500 cycles and operates b/w -65 to 165°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142138-75
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .276 inch; Filter Feature: NO;
142138
Amphenol 142138 is an RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator. It has SNAP coupling, suitable for BOARD mounting. Ideal for applications requiring reliable MALE contact in JACK body style.
142194-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Contact Style: COAX; Mounting Type: CABLE; Insulator Material: POLYTETRAFLUOROETHYLENE;
142186-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Characteristic Impedance: 75 ohm; Manufacturer Series: 142186-75;
142194
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Coupling Type: SNAP; Termination Contact Finish: GOLD;
142186
Amphenol's 142186 SSMB Connector features gold termination, snap coupling, and PTFE insulator. Ideal for RF applications, this female connector with crimp solder termination is designed for cable mounting in straight orientation.
142146
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Termination Contact Finish: GOLD;
142191
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Panel Mount: YES; Coupling Type: SNAP;
142187
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: PLUG; Filter Feature: NO;
142120
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Style: STRAIGHT; Coupling Type: SNAP;
142126
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Type: CRIMP; Panel Mount: YES;
142130
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; Mating Contact Finish: GOLD (30);
142131
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 142131; Termination Contact Finish: GOLD; MIL Conformity: NO;
142133
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Termination Type: SOLDER; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD; DIN Conformance: NO;
142135
RF SMB CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Filter Feature: NO;
142136
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Termination Contact Finish: GOLD; Filter Feature: NO; JESD-609 Code: e4; Panel Mount: NO;
142137
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: GOLD (30); MIL Conformity: NO;
142139
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; JESD-609 Code: e4; Mating Contact Finish: GOLD;
142158
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Filter Feature: NO; DIN Conformance: NO;
142190
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: JACK; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved