Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 132286RP is an RF SMA connector with a dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for commercial applications, it features a threaded coupling type and gold shell finish for durability in cable mounting setups up to 12.4 GHz frequency.
Median Price
$10.120
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$11.500
100+ parts
$8.620
1k+ parts
-
10k+ parts
Mouser Electronics
$11.530
$8.330
$7.080
DigiKey
$12.230
$8.831
$7.508
Master Electronics
$7.490
Verical
$8.741
Chip1Stop
$8.440
Nova Conductors
$5.965
Vyrian
VNN
American Connector Supply Corp
IBS Electronics
$10.279
Electro Sonic
$6.620
$4.580
$4.510
Rapid Electronics
Area51 Electronics
Ampacity Inc.
$4.980
Aranea Global
$5.845
$5.612
Gateway Technologies
$5.308
Singapore Electronics
$6.561
$6.101
$5.839
$5.576
Perfect Parts
High dielectric withstanding voltage ensures safety and reliability in high voltage applications.
Compact body depth offers space-saving design for tight installations.
Threaded coupling provides secure and reliable connection for stable signal transmission.
Polytetrafluoroethylene insulator material offers high temperature stability and excellent electrical properties.
High maximum operating temperature allows for use in demanding environments without compromising performance.
Low minimum operating temperature ensures functionality in extreme cold conditions.
Gold shell finish provides enhanced conductivity and corrosion resistance for reliable signal transmission.
RF SMA connector type is commonly used in high frequency applications for efficient signal transfer.
Low VSWR of 1.3 indicates minimal signal reflection and high efficiency in signal transmission.
Natural insulator color allows for easy identification and maintenance of the connector.
500 cycles durability ensures long-lasting performance and reliability in repeated connection/disconnection scenarios.
Cable mounting type offers versatility and compatibility with various cable types for flexible installation.
50 ohm characteristic impedance is standard in RF applications, ensuring proper impedance matching for optimized signal transfer.
Brass shell material provides durability, corrosion resistance, and high conductivity for reliable signal transmission.
Compatible with RG-178B/U cable types for seamless integration and connectivity with existing setups.
Crimp termination type offers secure and efficient connection without the need for soldering.
Male contact gender is commonly used for plug connectors, ensuring compatibility with female connectors.
Jack body or shell style provides easy connection and disconnection of the connector.
Straight mounting style simplifies installation and ensures proper alignment for optimal signal transmission.
Coaxial contact style is designed for high frequency applications, ensuring reliable signal transmission and minimal interference.
Terminal length of 0.252 inch offers sufficient contact area for secure signal transfer.
Locking mounting option provides secure and stable attachment of the connector, preventing accidental disconnection.
High maximum operating frequency of 12.4 GHz supports efficient signal transmission in high frequency applications.
Commercial reliability ensures consistent performance and quality for industrial and commercial applications.
SSMA Connectors 132286RP attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Durability:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
132286RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Lite-on Semiconductor
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Nexperia
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Synsemi
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SF2921-61506-1S
Sv Microwave
RF SMA CONNECTOR;
221789-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Coupling Type: THREADED; Body or Shell Style: JACK;
5763
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Manufacturer Series: SMA; Filter Feature: NO; JESD-609 Code: e4;
M39012/55-3126
Radiall S A
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Coupling Type: THREADED; Characteristic Impedance: 75 ohm;
73251-1150
Molex
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
135100-01-06.00
Amphenol
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
142-0307-411
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Additional Features: APPLICABLE CABLES: RG-58/U; RG-141; RG-303; Characteristic Impedance: 50 ohm;
142-0701-841
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
Carlisle Interconnect Technologies
5763 by Carlisle Interconnect Technologies is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.03 dB. It features a dielectric withstanding voltage of 1400VAC, making it suitable for applications requiring high durability and reliability in commercial settings up to 18 GHz frequency.
5350-3
The Carlisle Interconnect Technologies 5350-3 is an RF SMA CONNECTOR with MALE contact gender and COAX style. It features a 0.05" terminal length, STRAIGHT mounting style, and LOCKING option. Ideal for commercial applications requiring reliable SSMA connectors.
TC-400-NMH-D
Times Microwave Systems
TC-400-NMH-D by Times Microwave Systems is an RF N CONNECTOR with 0.1 dB Insertion Loss and 50 ohm Characteristic Impedance. It is a CRIMP termination type suitable for applications up to 3 GHz, making it ideal for commercial use in cable installations requiring low signal loss.
1052944-1
TE Connectivity
TE Connectivity's 1052944-1 SSMA Connector features threaded coupling, PTFE insulator, and female contact gender. With a max operating frequency of 18 GHz, it is ideal for RF applications requiring panel mount connectors with straight mounting style.
M39012/55-4007
Amphenol's M39012/55-4007 SSMA Connector features 0.11 dB insertion loss, threaded coupling, and PTFE insulator. Ideal for RF applications up to 12.4 GHz, with 50 ohm impedance and male plug design for cable mounting using clamp solder termination.
R125.464.270
Radiall S A's R125.464.270 RF SMA Connector features 50 ohm impedance, 0.3 dB insertion loss, and 18 GHz operating frequency for high-performance RF applications. With a durability of 500 cycles and gold finish, it is ideal for commercial use in telecommunications and aerospace industries. The connector has a threaded coupling type, PTFE insulator material, and can withstand temperatures from -65 to 165 °C.
R125176001
R125176001 by Radiall S A is an RF SMA connector with 50 ohm impedance and 0.25 dB insertion loss. Featuring a threaded coupling type, it has a max operating frequency of 12.4 GHz. Ideal for applications requiring high-frequency signal transmission in aerospace and telecommunications industries.
132203RP
Amphenol 132203RP SSMA Connector features 1400VAC Dielectric Withstanding Voltage, 165°C Max Operating Temp, and 12.4 GHz Max Operating Frequency. Ideal for RF applications requiring durable connectors with a characteristic impedance of 50 ohm and commercial reliability.
Bel Fuse
Bel Fuse's 142-0307-411 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.06 dB Insertion Loss, and 1050VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 12.4 GHz, this connector has a durable brass shell, POLYTETRAFLUOROETHYLENE insulator, and operates b/w -65 to 165 °C.
901-9511-3SFC
Amphenol 901-9511-3SFC is an RF SMA connector with 0.11 dB insertion loss, 1.51 VSWR, and 12.4 GHz max operating frequency. It features gold termination finish, threaded coupling, and PTFE insulator material. Ideal for applications requiring a 50 ohm impedance cable connection with male plug and crimp termination.
142-0711-201
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 10 GHZ; Body or Shell Style: RECEPTACLE; Mounting Type: BOARD;
2018.42.2520.005
Ims Connector Systems
2018.42.2520.005 by Ims Connector Systems is an RF SMA connector with a threaded coupling type, suitable for board and panel mounting. Featuring a characteristic impedance of 50 ohm, it offers low insertion loss of 0.127 dB and high insulation resistance of 5 Gohm. Ideal for applications requiring durability with 500 cycles, this connector operates b/w -55 to 125°C and supports frequencies up to 18 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132203-12
Amphenol 132203-12 is an RF SMA connector with gold shell finish, PTFE insulator, and brass shell material. It features a right-angle mounting style for board and panel installation. This SSMA connector has a 0.411" body width and 0.926" body depth, making it ideal for commercial applications requiring reliable coaxial connections.
132289RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Body or Shell Style: RECEPTACLE; Mounting Option-1: LOCKING;
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: NOT APPLICABLE; Durability: 500 Cycles;
132291-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Mounting Option-1: LOCKING; Termination Type: SOLDER; Insulator Color: NATURAL;
132284RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: CRIMP; Shell Finish: GOLD; Total No. of Contacts: 1;
132203
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED;
132231
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
132203-14
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: BOARD AND PANEL; Body Depth: .926 inch;
132203-18
RF SMA CONNECTOR; Reliability: COMMERCIAL; No. of Ports: 1; Mounting Option-1: LOCKING; Mounting Style: RIGHT ANGLE; Termination Type: SOLDER;
132203-16
RF SMA CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; No. of Ports: 1; Termination Type: SOLDER; Shell Material: BRASS;
132231RP
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1; Total No. of Contacts: 1;
132284
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: JACK; DIN Conformance: NO;
132289
Amphenol 132289 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It can withstand up to 1400VAC, operates b/w -65 to 165 °C, and has a max frequency of 18 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
132291
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; Body or Shell Style: JACK;
132255-11
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Width: .312 inch; Total No. of Contacts: 1; Shell Material: BRASS; Termination Type: SURFACE MOUNT;
132225
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE;
132255
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 132255; Mating Contact Finish: GOLD; Coupling Type: THREADED;
132299
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Characteristic Impedance: 50 ohm; Mounting Style: RIGHT ANGLE;
132241
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Type: CRIMP SOLDER; Total No. of Contacts: 1;
132255-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Termination Type: SURFACE MOUNT; No. of Ports: 1; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved