Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 132299 is an RF SMA connector with threaded coupling, gold-plated contacts, and PTFE insulator. It has a low insertion loss of 0.14 dB and operates at up to 12.4 GHz. Ideal for applications requiring MIL conformity, such as cable connections in high-frequency systems.
Median Price
$15.576
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$16.830
100+ parts
$11.010
1k+ parts
$10.570
10k+ parts
-
DigiKey
$16.870
$12.188
$10.881
Master Electronics
$11.170
Verical
Powell Electronics
$13.850
Nova Conductors
$9.188
VNN
Vyrian
Electro Sonic
$11.600
$8.700
IBS Electronics
$15.343
$12.945
AZTECH Wire
$5.201
Ampacity Inc.
$8.120
Gateway Technologies
$8.176
Netroflash
$8.728
$8.544
Singapore Electronics
$10.106
$9.398
$8.994
$8.590
Low insertion loss ensures efficient signal transmission without significant loss of power, making this connector ideal for high-frequency applications.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable and long-lasting performance.
Military conformity ensures high-quality and reliable performance, making this connector suitable for demanding applications where reliability is crucial.
Threaded coupling type provides a secure and stable connection, ensuring that the connector stays firmly in place even in high-vibration environments.
Insulator material of polytetrafluoroethylene offers excellent electrical properties and high-temperature resistance, making this connector suitable for a wide range of operating conditions.
RF SMA connector is widely used in RF applications, offering good performance and compatibility with a variety of devices and equipment.
Gold mating contact finish ensures low contact resistance and reliable signal transmission, reducing signal loss and improving overall performance.
Cable mounting type allows for easy installation and connection to RF cables, providing flexibility in design and integration.
50 ohm characteristic impedance is a standard in RF applications, ensuring compatibility and efficient signal transmission with other RF components and systems.
Crimp termination type offers a secure and reliable connection, making installation easier and ensuring stable performance in rugged environments.
Male contact gender is commonly used in RF connections, providing a secure fit and reliable signal transmission for various applications.
Plug body or shell style is easy to connect and disconnect, making it convenient for quick setup and maintenance of RF systems.
Right angle mounting style is suitable for compact designs and tight spaces, allowing for flexible installation and layout options in RF systems.
High maximum operating frequency of 12.4 GHz makes this connector suitable for high-frequency applications, offering reliable performance and signal integrity at higher frequencies.
SSMA Connectors 132299 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
132299 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
3110-00-698-0572, 3110006980572, 4910-14-457-5225, 4910144575225, 5820-12-147-2434, 5820121472434, 5935-01-664-5832, 5935016645832
NIIN
006980572, 144575225, 121472434, 016645832
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Laube Technology
ROHM
1552200168
Molex
WIRE AND CABLE;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
First Components International
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
24-1080-1201D
Phoenix Contact
RF SMA/SSMA Connectors; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1; Maximum Insertion Force (N): 3.892;
1115.42.2510.001
Ims Connector Systems
1115.42.2510.001 by Ims Connector Systems is an RF SMA connector with a characteristic impedance of 50 ohm and gold termination contact finish. It has a durability of 500 cycles, insulation resistance of 10^10 ohm, and operates b/w -55 to 125 °C. Ideal for board mounting applications requiring threaded coupling type connectors.
901-10512-3
Amphenol
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1051018-1
TE Connectivity
TE Connectivity's 1051018-1 SSMA Connector features a body length of 0.76", insertion loss of 0.13 dB, and insulation resistance of 10^10 ohm. Ideal for RF applications up to 18 GHz, this threaded coupling connector with PTFE insulator is MIL-compliant and operates b/w -65°C to 125°C.
067.42.2412.226
067.42.2412.226 by Ims Connector Systems is an RF SMA connector with threaded coupling, gold over nickel termination, and PTFE insulator. It has a VSWR of 1.25, operates up to 2 GHz, and is ideal for panel mount applications requiring a 50 ohm impedance connection.
1051164-1
TE Connectivity's 1051164-1 SSMA Connector features 0.666" body length, 0.18 dB insertion loss, and gold termination contact finish. Ideal for RF applications up to 12.4 GHz with threaded coupling type and PTFE insulator material. Suitable for RG 402 semi-rigid cables in high-temp environments (-65 to 165°C).
1051639-1
TE Connectivity's 1051639-1 SSMA Connector features TFE insulator, gold shell finish, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with RG 141 cable termination in commercial settings.
R125326000
Radiall S A
The Radiall S A R125326000 SSMA Connector features 0.1 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications, it has a threaded coupling type and gold-plated termination for low VSWR. Suitable for panel or cable mounting with solder termination in female jack configuration.
901-9511-1
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
2004-7985-00
Tyco Electronics M/a-com
The Tyco Electronics M/a-com 2004-7985-00 SSMA Connector features gold termination, threaded coupling, and PTFE insulator. With a VSWR of 1.06 and max frequency of 18 GHz, it's ideal for RF applications requiring a 50 ohm impedance. This female jack connector supports cable and panel mounting in various electronic systems.
73251-0450
Molex 73251-0450 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-316 cable type, operating in temperatures from -65 to 165 °C.
142-0701-411
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Manufacturer Series: SMA; JESD-609 Code: e4;
M39012/56-3107
TE Connectivity's M39012/56-3107 is an RF SMA connector with threaded coupling, 50 ohm impedance, and stainless steel shell. It is suitable for cables like RG 188, RG 316, RG 188A, and RG 174. With a max operating frequency of 12.4 GHz and temperature range from -65 to 165 °C, it finds applications in high-frequency communication systems.
M39012/93-3001
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SOLDER; Mounting Style: STRAIGHT;
3-1478955-0
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; Cable Types: RG-174/U; Body or Shell Style: JACK;
1052963-1
TE Connectivity's 1052963-1 is an SSMA connector with a threaded coupling type and panel mount capability. It features a polytetrafluoroethylene insulator material, beryllium copper contact material, and a gold mating contact finish. This RF SMA connector is commonly used in applications with a max operating frequency of 12.4 GHz.
142-0761-801
Bel Fuse
Bel Fuse's 142-0761-801 SSMA Connector features a body diameter of 0.247", insulation resistance of 1000000000 ohm, and dielectric voltage of 700VAC. Ideal for RF applications, this connector has a max operating frequency of 26.5 GHz and durability up to 500 cycles in commercial settings.
M39012/55-3028
Delta Electronics Manufacturing
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Termination Contact Finish: GOLD; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Manufacturer Series: M39012/55;
9114-1113-000
Radiall S A's 9114-1113-000 SSMA Connector features 0.07 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 18 GHz with FEMALE contact gender, MICROSTRIP mounting, and TAB termination type.
1053091-1
TE Connectivity's 1053091-1 SSMA Connector features threaded coupling, PTFE insulator, and gold shell finish. With a 50 ohm impedance and operating frequency up to 18 GHz, it is ideal for RF applications requiring reliable commercial performance in temperatures ranging from -65°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132203-12
Amphenol 132203-12 is an RF SMA connector with gold shell finish, PTFE insulator, and brass shell material. It features a right-angle mounting style for board and panel installation. This SSMA connector has a 0.411" body width and 0.926" body depth, making it ideal for commercial applications requiring reliable coaxial connections.
132289RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Body or Shell Style: RECEPTACLE; Mounting Option-1: LOCKING;
132203RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: NOT APPLICABLE; Durability: 500 Cycles;
132291-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Mounting Option-1: LOCKING; Termination Type: SOLDER; Insulator Color: NATURAL;
132284RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: CRIMP; Shell Finish: GOLD; Total No. of Contacts: 1;
132203
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED;
132231
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
132203-14
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: BOARD AND PANEL; Body Depth: .926 inch;
132203-18
RF SMA CONNECTOR; Reliability: COMMERCIAL; No. of Ports: 1; Mounting Option-1: LOCKING; Mounting Style: RIGHT ANGLE; Termination Type: SOLDER;
132203-16
RF SMA CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; No. of Ports: 1; Termination Type: SOLDER; Shell Material: BRASS;
132231RP
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1; Total No. of Contacts: 1;
132284
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: JACK; DIN Conformance: NO;
132289
Amphenol 132289 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It can withstand up to 1400VAC, operates b/w -65 to 165 °C, and has a max frequency of 18 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
132291
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; Body or Shell Style: JACK;
132255-11
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Width: .312 inch; Total No. of Contacts: 1; Shell Material: BRASS; Termination Type: SURFACE MOUNT;
132225
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE;
132255
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 132255; Mating Contact Finish: GOLD; Coupling Type: THREADED;
132241
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Type: CRIMP SOLDER; Total No. of Contacts: 1;
132255-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Termination Type: SURFACE MOUNT; No. of Ports: 1; Mounting Type: BOARD;
132298
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; DIN Conformance: NO; Manufacturer Series: 132298;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved