Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Radiall S A R125154002 SSMA Connector features 0.09 dB Insertion Loss, 1.1 VSWR, and 18 GHz Max Operating Frequency. Ideal for RF applications requiring 50 ohm impedance, with GOLD/NICKEL termination for low signal loss in high-frequency environments. Suitable for cable mounting with RIGHT ANGLE plug style.
Median Price
$20.250
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$11.340
100+ parts
$7.850
1k+ parts
$7.010
10k+ parts
-
Verical
$18.951
$12.955
$12.307
Mouser Electronics
$14.620
$13.050
DigiKey
$20.850
$15.066
$13.450
Element14
$26.590
$19.190
$17.140
Nova Conductors
$9.242
Vyrian
Amar Radio Corporation
LWI Electronics Inc
SPM Sales
Aztec Data Supply Inc.
$1.020
Corohmni
$8.821
Continental Prestige Electronics
$8.880
$6.770
Netroflash
$9.057
Argo Parts USA
Perfect Parts
Low insertion loss ensures efficient signal transmission, making this connector a reliable choice for high-performance applications.
Gold finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term durability and signal integrity.
Threaded coupling ensures secure mating and vibration resistance, making this connector ideal for rugged environments.
PTFE insulator material offers high dielectric strength and low loss, providing excellent electrical performance and reliability.
RF SMA connector is widely used in telecommunications and RF applications, making it a versatile and popular choice.
Low VSWR indicates minimal signal reflection, ensuring optimal signal quality and performance in high-frequency applications.
Cable mounting type allows for easy installation and flexibility in connecting to various devices, making it a convenient choice for different setups.
50 ohm impedance is standard for RF applications, ensuring compatibility and proper signal transfer in RF systems.
Solder termination provides a secure and permanent connection, making this connector suitable for applications requiring reliable signal transmission.
Male contact gender is commonly used for external connections, providing compatibility with a wide range of devices and equipment.
Plug body style offers easy connection and disconnection, making this connector user-friendly for quick setup and maintenance.
Right-angle mounting allows for space-saving installation in tight spaces, making it a practical choice for applications with limited room.
High-frequency capability up to 18 GHz enables this connector to support demanding RF applications with excellent performance and reliability.
SSMA Connectors R125154002 attributes and parameters. Explore more SSMA Connectors devices from Radiall S A
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
R125154002 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
1N4148WS
Synsemi
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Secos
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
132255
Amphenol
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 132255; Mating Contact Finish: GOLD; Coupling Type: THREADED;
MP-19-02F-4-TGG
SPC TECHNOLOGY/ MULTICOMP
RF SMA CONNECTOR;
142-1701-201
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Filter Feature: NO; Maximum Operating Frequency: 18 GHz;
142-9701-301
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; IEC Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SF1211-6062
Sv Microwave
SF1211-6062 by Sv Microwave is a SSMA Connector with 50 ohm impedance, 0.12 dB insertion loss, and 1.25 VSWR. Ideal for RF SMP applications up to 26.5 GHz, it features PTFE insulation, steel shell material, and can withstand temperatures from -65 to 165 °C.
142-0403-011
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .21 dB; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
23_SMA-50-0-324/111_NY
Huber+suhner Ag
23_SMA-50-0-324/111_NY by Huber+suhner Ag is a threaded RF SMA connector with a characteristic impedance of 50 ohm, suitable for panel mounting. With a max operating frequency of 18 GHz and durability of 500 cycles, it is commonly used in commercial applications requiring reliable signal transmission.
142-0701-871
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; IEC Conformity: NO;
901-10387
Amphenol 901-10387 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for commercial applications up to 3 GHz. Featuring a gold shell finish and polytetrafluoroethylene insulator, it has a VSWR of 1.16 and operates b/w -65°C to 165°C. Ideal for board and panel mounting in right-angle configurations.
SMA-J-P-H-RA-TH1
Samtec
SMA-J-P-H-RA-TH1 by Samtec is a RF SMA connector with threaded coupling, suitable for board mounting. With a max operating frequency of 18 GHz, it features female contact gender and right-angle mounting style. Ideal for commercial applications requiring reliable coaxial connections.
1051120-1
TE Connectivity
TE Connectivity's 1051120-1 SSMA Connector features 0.673" body length, 0.21 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with RG 405 semi-rigid cable types, this threaded coupling connector has a characteristic impedance of 50 ohm and operates b/w -65 to 125 °C.
142-1701-206
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; JESD-609 Code: e4; MIL Conformity: NO;
R125091000
Radiall S A
R125091000 by Radiall S A is an RF SMA connector with 1.08 dB insertion loss and 1.06 VSWR, suitable for applications up to 18 GHz. Featuring gold termination contact finish, threaded coupling type, and PTFE insulator material, it has a characteristic impedance of 50 ohm and male contact gender for cable mounting.
142-0771-821
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; Mating Contact Finish: GOLD;
CUC-COX-J1M-A/KBS
Phoenix Contact
5-1814832-1
5-1814832-1 by TE Connectivity is an RF SMA connector with 50 ohm impedance, PTFE insulator, and gold shell finish. It is used in commercial applications at frequencies up to 3 GHz for board mounting with a durability of 50 cycles.
901-9610-3
Amphenol 901-9610-3 is an RF SMA connector with 0.11 dB insertion loss, gold termination finish, and 12.4 GHz max operating frequency. Ideal for commercial applications requiring a 50 ohm characteristic impedance, it features a threaded coupling type and PTFE insulator material for reliable performance in panel mount installations.
142-0801-806
Bel Fuse
Bel Fuse's 142-0801-806 SSMA Connector features a body length of 0.375", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications up to 18GHz, this plug-style connector with brass shell and PTFE insulator is durable for 500 cycles in commercial settings.
0732510450
Molex
Molex 0732510450 is an RF SMA connector with threaded coupling, 50 ohm impedance, and crimp termination. Ideal for cable mounting applications requiring a male plug with straight mounting style in SSMA connectors category.
3-1478955-0
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; Cable Types: RG-174/U; Body or Shell Style: JACK;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R125.426.000
Radiall S A's R125.426.000 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and is suitable for commercial applications.
R125426000
R125426000 by Radiall S A is a SSMA Connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.12 VSWR. It is used in RF applications up to 18 GHz, featuring gold over nickel finish, PTFE insulator, and female contact gender for durability and reliability in commercial settings.
R125464270
Radiall S A's R125464270 is a RF SMA Connector with 50 ohm impedance, 0.296 dB insertion loss, and 1.16 VSWR. Ideal for applications up to 18 GHz, it features gold termination on a PTFE insulator in a panel mount receptacle design.
R125.464.270
Radiall S A's R125.464.270 RF SMA Connector features 50 ohm impedance, 0.3 dB insertion loss, and 18 GHz operating frequency for high-performance RF applications. With a durability of 500 cycles and gold finish, it is ideal for commercial use in telecommunications and aerospace industries. The connector has a threaded coupling type, PTFE insulator material, and can withstand temperatures from -65 to 165 °C.
R125464271
The Radiall S A R125464271 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.296 dB and high VSWR of 1.16, suitable for applications up to 18 GHz. This panel mount receptacle with PTFE insulator is ideal for high-frequency communication systems.
R125.464.271
Radiall S A's R125.464.271 SSMA Connector features 0.3 dB insertion loss, 1.1 VSWR, and 50 ohm impedance for up to 18 GHz applications. With a gold over nickel finish, this threaded RF SMA connector is panel mountable and ideal for high-frequency signal transmission in various industries.
R125.464.270W
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
R125.426.000W
R125.426.000W by Radiall S A is a RF SMA CONNECTOR with 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. It is ideal for board mounting applications in commercial settings, offering durability of 500 cycles and operating frequency up to 18 GHz.
R125.464.274
The Radiall S A R125.464.274 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.3 dB and a VSWR of 1.1, making it ideal for applications requiring high-frequency signal transmission up to 18 GHz, such as in telecommunications and aerospace industries.
R125464274
The Radiall S A R125464274 is an RF SMA Connector with a threaded coupling type and gold termination contact finish. It features a low insertion loss of 0.18 dB and a VSWR of 1.12, making it ideal for applications requiring high-frequency performance up to 18 GHz in industries such as telecommunications and aerospace.
R125464275
The Radiall S A R125464275 SSMA Connector has a low insertion loss of 0.18 dB and a VSWR of 1.12, suitable for applications up to 18 GHz. With threaded coupling type and PTFE insulator material, it is a female receptacle connector with 50 ohm impedance for panel mounting in RF SMA applications.
R125680000
R125680000 by Radiall S A is a RF SMA connector with 50 ohm impedance, gold termination, and PTFE insulator. It operates b/w -65 to 165 °C, suitable for applications up to 18 GHz requiring panel mount connectors with threaded coupling.
R125.680.000
Radiall S A's R125.680.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.3 dB Insertion Loss, and 1414VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz, this gold-finished connector has a characteristic impedance of 50 ohm and operates b/w -65°C to 165°C.
R125.238.000
Radiall S A's R125.238.000 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.21 dB and can operate at frequencies up to 12.4 GHz, making it suitable for high-frequency applications in the telecommunications industry.
R125238000
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARDS: MIL-C-39012; IEC 169-1, APPLICABLE CABLES: RG 55; RG 142; RG 223; RG 400/U; Filter Feature: NO; Mounting Type: CABLE;
R125326000
The Radiall S A R125326000 SSMA Connector features 0.1 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications, it has a threaded coupling type and gold-plated termination for low VSWR. Suitable for panel or cable mounting with solder termination in female jack configuration.
R125.326.000
R125.326.000 by Radiall S A is a RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and can withstand temperatures from -65 to 105 °C.
R125076001
The Radiall S A R125076001 SSMA Connector features 1.08 dB insertion loss, 1.06 VSWR, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, this threaded connector with PTFE insulator is a male plug suitable for cable mounting with crimp termination.
R125.076.001
Radiall S A R125.076.001 is an RF SMA connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.27 VSWR. It features gold over nickel termination for crimp applications up to 12.4 GHz in cable assemblies requiring threaded coupling for high-frequency signal transmission.
R125.462.001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved