Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
R125.462.001 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.3 dB, suitable for applications up to 18 GHz. Featuring gold-plated contacts with nickel barrier, it offers high durability with 500 cycles and insulation resistance of 5 Gohm. This panel-mount connector has a threaded coupling type and operates in temperatures ranging from -65 to 165 °C.
Median Price
$18.060
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
LWI Electronics Inc
AZTECH Wire
$7.949
Continental Prestige Electronics
$17.699
Bastille Electronics
$17.157
$16.073
Argo Parts USA
Allows for secure and stable attachment to a panel, ensuring reliable connection.
High insulation resistance helps in preventing signal interference and maintaining signal integrity.
Low insertion loss ensures minimal loss of signal strength during transmission.
Withstanding high voltage levels ensures safety and reliability in operation.
Gold finish with nickel barrier provides excellent conductivity and corrosion resistance.
Compact body depth allows for space-saving installation.
Threaded coupling ensures secure mating and prevents accidental disconnection.
Polytetrafluoroethylene insulation offers high temperature resistance and excellent dielectric properties.
High operating temperature range allows for use in various environments.
Wide temperature range ensures reliable performance in extreme conditions.
Gold shell finish provides superior conductivity and corrosion resistance.
RF SMA connector is commonly used in high-frequency applications, ensuring compatibility and performance.
Low VSWR indicates minimal signal reflection, leading to efficient signal transmission.
Withstands frequent mating cycles, ensuring long-lasting performance and reliability.
Panel mounting option allows for easy installation and secure attachment.
Standard characteristic impedance for RF applications, ensuring proper signal transfer.
Steel shell material provides durability and mechanical strength.
Solder termination offers a reliable connection for signal transmission.
Female contact gender allows for easy mating with male connectors.
Receptacle style body or shell provides a secure housing for the connector.
Straight mounting style ensures a direct connection for efficient signal transmission.
Coaxial contact style is ideal for high-frequency signals, ensuring minimal signal loss.
Optimal terminal length for efficient signal transfer and connection.
Locking mounting option provides secure attachment and prevents accidental disconnection.
Supports high-frequency signal transmission up to 18 GHz.
Commercial-grade reliability ensures consistent performance in various applications.
SSMA Connectors R125.462.001 attributes and parameters. Explore more SSMA Connectors devices from Radiall S A
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
R125.462.001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
901-9870
Amphenol
Amphenol 901-9870 is an RF SMA connector with 0.25 dB insertion loss, 1400VAC dielectric voltage, and gold termination. Ideal for RG-58A/U cables in commercial applications, it operates b/w -65 to 165 °C with a max frequency of 12.4 GHz.
142-0701-871
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; IEC Conformity: NO;
875-82-17
Kings Electronics
The Kings Electronics 875-82-17 is an RF SMA connector with threaded coupling, gold finish, and PTFE insulator. With a characteristic impedance of 50 ohm and max operating frequency of 12.4 GHz, it's ideal for high-frequency applications in military and aerospace industries.
R125.072.000
Radiall S A
Radiall S A R125.072.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.21 dB Insertion Loss, and 750VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 12.4 GHz with RG-316 cable termination in commercial settings due to its durability and reliability over 500 cycles at temperatures ranging from -65 to 165 °C.
1050762-1
TE Connectivity 1050762-1 is an RF SMA connector with 50 ohm impedance, 0.15 dB insertion loss, and 1.18 VSWR. Ideal for RG 402 semi-rigid cables in applications requiring threaded coupling and TFE insulator material. Operating temperature range from -65 to 105 °C with gold shell finish for commercial reliability.
MP-19-02V-11-TGG
SPC TECHNOLOGY/ MULTICOMP
RF SMA CONNECTOR;
16_SMA-50-3-145/133_NE
Huber+suhner Ag
16_SMA-50-3-145/133_NE by Huber+suhner Ag is a threaded RF SMA connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and is suitable for use in commercial applications.
5692
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; JESD-609 Code: e4; DIN Conformance: NO; Characteristic Impedance: 50 ohm; Termination Contact Finish: GOLD (50);
M39012/60-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Termination Contact Finish: GOLD; IEC Conformity: NO;
M39012/94-3001
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Filter Feature: NO; Body Depth: .59 inch;
132255-12N
Amphenol's 132255-12N is a SSMA connector with dielectric voltage of 1400VAC, suitable for RF applications up to 18 GHz. Featuring a nickel finish and brass shell, it has a characteristic impedance of 50 ohm. This right-angle jack connector is designed for surface mount on boards, ensuring reliable commercial performance.
142-0761-881
Bel Fuse
Bel Fuse's 142-0761-881 SSMA Connector features a body diameter of 0.247", insulation resistance of 1G ohm, and dielectric voltage of 700VAC. Ideal for RF applications with a characteristic impedance of 50 ohm, operating up to 26.5 GHz frequency in commercial settings.
1053354-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; DIN Conformance: NO;
132241
Amphenol 132241 is an RF SMA Connector with 0.14 dB Insertion Loss, gold termination contact finish, and threaded coupling type. Ideal for applications requiring a 50 ohm characteristic impedance, it can be panel mounted and operates up to 12.4 GHz frequency.
142-0721-871
Bel Fuse's 142-0721-871 is an RF SMA connector with a dielectric voltage of 1400VAC, suitable for applications requiring a durable, threaded coupling type. With a temperature range from -65 to 165°C and impedance of 50 ohm, it offers reliable performance in commercial settings up to 18 GHz frequency.
901-9531-3SF
Amphenol 901-9531-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.15 VSWR. Ideal for RG-316 cables in applications requiring durability up to 500 cycles, such as commercial-grade communication systems operating at frequencies up to 12.4 GHz.
142-4701-501
Cinch Connectivity Solutions
142-4701-501 by Cinch Connectivity Solutions is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a panel mount design, right angle mounting style, and operates up to 18 GHz. Ideal for applications requiring high-frequency signal transmission in electronic devices.
142-9701-211
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Coupling Type: THREADED; Manufacturer Series: SMA;
SMA-J-P-H-ST-MT1
Samtec
SMA-J-P-H-ST-MT1 by Samtec is a RF SMA connector with threaded coupling and gold contact finish. It operates at up to 18 GHz frequency, suitable for commercial applications requiring reliable board mounting with solder or surface mount termination.
132106
Amphenol 132106 is an RF SMA Connector with threaded coupling, gold finish, and 50 ohm impedance. Featuring 0.14 dB insertion loss and 1.14 VSWR, it operates up to 18 GHz. Ideal for panel mount applications requiring high-frequency signal transmission with low loss and impedance matching.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R125.426.000
Radiall S A's R125.426.000 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and is suitable for commercial applications.
R125426000
R125426000 by Radiall S A is a SSMA Connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.12 VSWR. It is used in RF applications up to 18 GHz, featuring gold over nickel finish, PTFE insulator, and female contact gender for durability and reliability in commercial settings.
R125464270
Radiall S A's R125464270 is a RF SMA Connector with 50 ohm impedance, 0.296 dB insertion loss, and 1.16 VSWR. Ideal for applications up to 18 GHz, it features gold termination on a PTFE insulator in a panel mount receptacle design.
R125.464.270
Radiall S A's R125.464.270 RF SMA Connector features 50 ohm impedance, 0.3 dB insertion loss, and 18 GHz operating frequency for high-performance RF applications. With a durability of 500 cycles and gold finish, it is ideal for commercial use in telecommunications and aerospace industries. The connector has a threaded coupling type, PTFE insulator material, and can withstand temperatures from -65 to 165 °C.
R125464271
The Radiall S A R125464271 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.296 dB and high VSWR of 1.16, suitable for applications up to 18 GHz. This panel mount receptacle with PTFE insulator is ideal for high-frequency communication systems.
R125.464.271
Radiall S A's R125.464.271 SSMA Connector features 0.3 dB insertion loss, 1.1 VSWR, and 50 ohm impedance for up to 18 GHz applications. With a gold over nickel finish, this threaded RF SMA connector is panel mountable and ideal for high-frequency signal transmission in various industries.
R125.464.270W
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
R125.426.000W
R125.426.000W by Radiall S A is a RF SMA CONNECTOR with 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. It is ideal for board mounting applications in commercial settings, offering durability of 500 cycles and operating frequency up to 18 GHz.
R125.464.274
The Radiall S A R125.464.274 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.3 dB and a VSWR of 1.1, making it ideal for applications requiring high-frequency signal transmission up to 18 GHz, such as in telecommunications and aerospace industries.
R125464274
The Radiall S A R125464274 is an RF SMA Connector with a threaded coupling type and gold termination contact finish. It features a low insertion loss of 0.18 dB and a VSWR of 1.12, making it ideal for applications requiring high-frequency performance up to 18 GHz in industries such as telecommunications and aerospace.
R125464275
The Radiall S A R125464275 SSMA Connector has a low insertion loss of 0.18 dB and a VSWR of 1.12, suitable for applications up to 18 GHz. With threaded coupling type and PTFE insulator material, it is a female receptacle connector with 50 ohm impedance for panel mounting in RF SMA applications.
R125680000
R125680000 by Radiall S A is a RF SMA connector with 50 ohm impedance, gold termination, and PTFE insulator. It operates b/w -65 to 165 °C, suitable for applications up to 18 GHz requiring panel mount connectors with threaded coupling.
R125.680.000
Radiall S A's R125.680.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.3 dB Insertion Loss, and 1414VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz, this gold-finished connector has a characteristic impedance of 50 ohm and operates b/w -65°C to 165°C.
R125.238.000
Radiall S A's R125.238.000 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.21 dB and can operate at frequencies up to 12.4 GHz, making it suitable for high-frequency applications in the telecommunications industry.
R125238000
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARDS: MIL-C-39012; IEC 169-1, APPLICABLE CABLES: RG 55; RG 142; RG 223; RG 400/U; Filter Feature: NO; Mounting Type: CABLE;
R125326000
The Radiall S A R125326000 SSMA Connector features 0.1 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications, it has a threaded coupling type and gold-plated termination for low VSWR. Suitable for panel or cable mounting with solder termination in female jack configuration.
R125.326.000
R125.326.000 by Radiall S A is a RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and can withstand temperatures from -65 to 105 °C.
R125076001
The Radiall S A R125076001 SSMA Connector features 1.08 dB insertion loss, 1.06 VSWR, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, this threaded connector with PTFE insulator is a male plug suitable for cable mounting with crimp termination.
R125.076.001
Radiall S A R125.076.001 is an RF SMA connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.27 VSWR. It features gold over nickel termination for crimp applications up to 12.4 GHz in cable assemblies requiring threaded coupling for high-frequency signal transmission.
R125.464.004
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; IEC Conformity: NO; Termination Contact Finish: GOLD (51) OVER NICKEL (79);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved