Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 66506-353LF is a 2-row, 34-contact board connector with UL94V-0 flammability rating. Featuring 2.54mm terminal pitch and solder termination, it is ideal for straight mounting applications in headers & edge type connectors.
Median Price
$1.523
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Continental Prestige Electronics
$1.500
$1.470
Argo Parts USA
Corohmni
$2.523
Aztec Data Supply Inc.
$2.790
AZTECH Wire
$7.015
Semicontronic
$8.500
$8.288
$8.245
Ampacity Inc.
$10.500
Advanced Electronics
$10.608
$10.078
Having 2 rows loaded allows for a higher number of connections to be made at once, increasing the versatility of the product.
The board connector type ensures a secure and reliable connection to the PCB, reducing the risk of loose connections.
With a UL flammability code of 94V-0, this product meets high safety standards and is less likely to catch fire in case of a malfunction.
Having a high number of contacts allows for multiple connections to be made, making this product suitable for applications that require numerous connections.
The board mounting type ensures easy installation on a PCB, making it convenient for assembly and maintenance.
With a terminal pitch of 2.54mm, this product is compatible with standard PCB layouts, making it easier to integrate into existing designs.
The solder termination type allows for a secure and stable connection, ensuring reliable performance over time.
The male contact gender is commonly used in electronic connectors, providing a reliable and durable connection interface.
The straight mounting style simplifies the installation process and ensures proper alignment of the connector, improving overall performance.
Headers & Edge Type Connectors 66506-353LF attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol Communications Solutions
Additional Features:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
66506-353LF Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Bytesonic Electronics
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
8-5353189-0
TE Connectivity
TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.
TCMD-12-01
Samtec
Samtec's TCMD-12-01 is a 24-contact, 2-row board connector with terminal pitch of 2mm. It supports IDC/solder termination and male contact gender. Ideal for applications requiring straight mounting on both boards and cables.
1-281739-0
TE Connectivity 1-281739-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and is suitable for applications requiring high insulation resistance.
BM03B-GHS-TBT(LF)(SN)
J S T Mfg
BM03B-GHS-TBT(LF)(SN) by J S T Mfg is a 7" BOARD CONNECTOR with 0.049" pitch, suitable for PCBs. Features include 100000000 ohm insulation resistance, 500VAC dielectric voltage, and -25 to 85 °C operating range. Ideal for applications requiring male connectors with surface mount termination and POLYAMIDE insulator material.
BM15B-SRSS-TB(LF)(SN)
BM15B-SRSS-TB(LF)(SN) by J S T Mfg is a 15-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring TIN finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring male contacts, such as in electronics or telecommunications equipment.
1-1123723-2
TE Connectivity 1-1123723-2 is a board connector with 2 contacts, rated at 8A and 250V. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, suitable for applications requiring durability and reliability in temperatures ranging from -25 to 105 °C.
5040500491
Molex
Molex 5040500491 is a BOARD CONNECTOR with 4 contacts, 0.059" pitch, and 1000000000 ohm insulation resistance. Ideal for surface mount applications in electronics with operating temperatures from -25 to 85 °C.
1-2199119-5
TE Connectivity 1-2199119-5 is a card edge connector with 67 contacts, rated at 0.5A. It has a mating contact pitch of 0.019", operates b/w -40 to 80°C, and features a polarized design for secure connections. Ideal for board mounting applications requiring high reliability and signal integrity.
70107-0004
Molex 70107-0004 is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features MALE gender, CRIMP termination, and CABLE mounting. Ideal for various applications requiring reliable edge type connectors.
SHR-04V-S-B
SHR-04V-S-B by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts, CABLE mounting, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
20021111-00010T4LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 20021111-00010T4LF is a board connector with 10 contacts, rated for 1A signal current. It features a mating contact pitch of 0.05", insulation resistance of 100M ohm, and operates b/w -40°C to 125°C. Ideal for commercial applications requiring durable connectors with high mating cycles.
22-28-5123
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
B04B-PASK-1
B04B-PASK-1 by J S T Mfg is a 4-contact male board connector with tin/lead finish, copper alloy contacts, and UL 94V-0 flammability rating. It has a terminal pitch of 2mm and solder termination, suitable for various applications requiring reliable board-to-board connections in electronic devices.
PHR-4-L
PHR-4-L by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, POLYAMIDE66 insulator, and 800VAC dielectric voltage. It has a 0.386" body length, -25 to 85 °C operating temp range, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable signal transmission with 2A current at up to 24 AWG wire size.
5-103961-9
TE Connectivity 5-103961-9 is a board connector with 10 contacts, rated at 3A signal current. It features a body length of 2", insulation resistance of 5G ohm, and dielectric voltage of 600VAC. Ideal for applications requiring a temperature range from -65 to +105°C.
504077-1891
Molex 504077-1891 is a PCB connector with 0.043" contact pitch, 8u plating thickness, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features liquid crystal polymer insulator material and operates b/w -40 to 85 °C.
87438-0443
The Molex 87438-0443 is a board connector with 4 contacts, featuring a mating contact pitch of 0.059" and insulation resistance of 1G ohm. It has a body length of 0.287", operates b/w -55 to 105°C, and is ideal for commercial applications requiring a durable, polarized housing with matte tin finish.
1-640456-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; JESD-609 Code: e3;
43645-0300
The Molex 43645-0300 is a board connector with a mating contact pitch of 0.118". It has a body length of 0.388" and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in commercial applications and has a max operating temperature of 105°C.
52207-1833
The Molex 52207-1833 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. It is used in board mounting applications for signal currents up to 1A, with a durability of 30 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
66506-322LF
Amphenol's 66506-322LF is a 16-contact, 2-row board connector with a terminal pitch of 2.54mm and UL94V-0 flammability rating. It features male contacts for solder termination and straight mounting style, ideal for headers & edge type connectors in various electronic applications.
66506-320LF
Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.
66506-358LF
Amphenol's 66506-358LF is a 20-contact, 2-row board connector with UL 94V-0 flammability rating. Featuring a terminal pitch of 2.54mm, it is solder terminated and male gendered. Ideal for applications requiring straight mounting style in headers & edge type connectors.
66506-313LF
Amphenol Icc
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
66506-354
Amphenol's 66506-354 is a 40-contact, 2-row board connector with a terminal pitch of 2.54mm. Featuring UL94V-0 flammability rating, it is ideal for applications requiring male solder contacts in straight mounting style.
Berg Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 40; Mounting Type: BOARD; Mixed Contacts: NO;
66506-329LF
Amphenol's 66506-329LF is a 26-contact board connector with 2 rows, UL94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male solder contacts in straight mounting style on boards.
66506-338LF
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
6650494-1
TE Connectivity 6650494-1, a Card Edge Connector with 24 contacts, features Gold finish, Polyethylene insulator, and rated current of 35A. Suitable for commercial applications, it offers board mounting with compliant boardlock option and operates b/w -55°C to 105°C.
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; IEC Conformity: NO; Termination Type: PRESS FIT;
66506-064LF
Amphenol's 66506-064LF is a 2-row, 60-contact board connector with 2.54mm terminal pitch and UL94V-0 flammability rating. Ideal for applications requiring male connectors, solder termination, and straight mounting style in headers & edge type connectors.
66506-001LF
Amphenol 66506-001LF is a 10-contact board connector with 0.1" pitch, suitable for commercial applications. Features include 1400VAC dielectric voltage, -65 to 125°C operating range, and UL94V-0 flammability rating. Ideal for PCB connections requiring reliable signal transmission at up to 3A current.
66506-356
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Terminal Pitch (mm): 2.54; IEC Conformity: NO;
66506-353T
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Mounting Style: STRAIGHT; Mixed Contacts: NO;
66506-358G
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2.54; Mixed Contacts: NO; No. of Rows Loaded: 2;
66506-359T
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; No. of Rows Loaded: 2; Mixed Contacts: NO;
66506-350
Fci
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Total No. of Contacts: 16; JESD-609 Code: e4;
66506-352
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Total No. of Contacts: 26; Mixed Contacts: NO;
66506-356R
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Additional Features: POLARIZED; Filter Feature: NO;
66506-359R
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 66506; Termination Contact Finish: NICKEL PALLADIUM GOLD (30) OVER NICKEL; UL Flammability Code: 94V-0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved