Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 672; Package Code: BGA; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$0.116
$0.112
Northwest PG Solutions
$0.128
$0.113
Semicontronic
$10.000
$9.750
$9.700
One Stop Electronics
$18.000
Ampacity Inc.
$30.000
MARBEL Systems
$33.808
Kenton Components
$46.632
$41.036
Qasali Group International
$104.922
$92.331
Texas Native Microelectronics
$124.240
$119.270
$115.543
$109.331
Corphita
Supply Digital
Corohmni
Programmable Logic Devices (PLD) EP2A40F672C9N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
Output Function:
No. of I/O Lines:
Propagation Delay:
Technology:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EP2A40F672C9N Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.D
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Thinking Electronic Industrial
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SLG46538V
Renesas Electronics
SLG46538V by Renesas Electronics is a 17 macrocell OT PLD with 17 inputs/outputs. Operating at 1.71-1.89 V, it's ideal for applications requiring low power consumption and compact design in temperatures ranging from -40 to 85 °C. Package style includes chip carrier, heat sink/slug, very thin profile for versatile integration options.
EPM240M100C5N
Altera
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
ATF1502AS-7AX44-T
Microchip Technology
Microchip Technology's ATF1502AS-7AX44-T is a PLD with 32 I/O lines, 7.5 ns propagation delay, and 166.7 MHz max clock frequency. Ideal for applications requiring EE PLDs in commercial environments due to its thin profile, square package shape, and GULL WING terminals.
M4A5-32/32-7VNI48
Lattice Semiconductor
M4A5-32/32-7VNI48 by Lattice Semiconductor is a 32 macrocell EE PLD with 34 inputs and 32 I/O lines. It features a propagation delay of 7.5 ns, operates at a max clock frequency of 76.9 MHz, and has in-system programmability. Ideal for industrial applications requiring fast processing speeds and versatile I/O configurations.
EPM7064AETC44-4N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
LC4064ZE-7TN100C
LC4064ZE-7TN100C by Lattice Semiconductor is a 64-macrocell EE PLD with 7.5ns propagation delay, 111MHz clock frequency, and 1.9V max supply voltage. Ideal for applications requiring in-system programmability, it features 10 dedicated inputs and 64 I/O lines in a low-profile flatpack package with 0.5mm terminal pitch.
EPM240T100I5N
Intel
EPM240T100I5N by Intel is a PLD with 192 macro cells, 80 inputs/outputs, and 7.5ns propagation delay. It is used for applications requiring in-system programmability, such as digital signal processing and control systems due to its CMOS technology and JTAG boundary scan test capability.
EPM1270F256I5N
The Intel EPM1270F256I5N is a FLASH PLD with 980 macro cells, 212 inputs/outputs, and 10ns propagation delay. Ideal for applications requiring programmable logic devices in a compact grid array package with JTAG boundary scan test capability.
EPM3032ATC44-4
EPM3032ATC44-4 by Intel is a 32 macrocell EE PLD with 4.5 ns propagation delay and 227.3 MHz max clock frequency. Ideal for applications requiring in-system programmability, it operates at a max temp of 70°C with a supply voltage range of 3-3.6 V, featuring JTAG boundary scan test capability.
EPM570T144C5N
The EPM570T144C5N by Altera is a programmable logic device with 440 macro cells, a maximum supply voltage of 2.625V, and a propagation delay of 8.7ns. It is a CMOS technology-based IC with a package shape of square and a form of terminal as gull wing. This flash PLD is in-system programmable and has an output function of a macrocell. Its dimensions are 20mm in width and length, with a seated height of 1.6mm. This device is suitable for applications requiring low power consumption and high-speed performance.
LC4064V-75TN44I
LC4064V-75TN44I by Lattice Semiconductor is a 3.3V EE PLD with 64 macro cells, 32 inputs, and 30 I/O lines. With a propagation delay of 7.5ns and max clock frequency of 111MHz, it's ideal for applications requiring fast processing speeds in programmable logic devices. The device is surface mountable and supports JTAG boundary scan testing for efficient debugging processes.
ATF1508AS-7AX100
ATF1508AS-7AX100 by Microchip Technology is a 128 macrocell EE PLD with 7.5 ns propagation delay, suitable for applications requiring in-system programmability and output function from macrocells. It features a max clock frequency of 166.7 MHz, operates at temperatures b/w 0 to 70 °C, and has a package style of flatpack with thin profile and fine pitch terminals.
5M1270ZF256I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
EPM570GT144C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
LC4032ZE-7MN64I
LC4032ZE-7MN64I by Lattice Semiconductor is a 32 macrocell EE PLD with 7.5 ns propagation delay, suitable for applications requiring in-system programmability and JTAG boundary scan testing. It features a max clock frequency of 111 MHz, operates at supply voltages b/w 1.7 V to 1.9 V, and has a package style of grid array with thin profile and fine pitch terminals.
ATF1504AS-10JU84
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
ATF16V8BQL-15SU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
ATF22V10CQZ-20SU-T
ATF22V10CQZ-20SU-T by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, ideal for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style.
EPM7192SQC160-10N
EPM7192SQC160-10N by Intel is a 192 macrocell EE PLD with 10 ns propagation delay, operating at up to 125 MHz. It features in-system programmability and is ideal for applications requiring high-speed digital logic functions. The device has a square package shape, flatpack style, and Gull Wing terminals for easy surface mounting.
5M1270ZT144C5N
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EP2A25F1020C7
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: BALL; No. of Terminals: 1020; Package Code: HBGA; Package Shape: SQUARE;
EP2A15F672C9
EP2A15B724C9
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 724; Package Code: BGA; Package Shape: SQUARE;
EP2A25B724C9
EP2A15F672I8
LOADABLE PLD; Form Of Terminal: BALL; No. of Terminals: 672; Package Code: BGA; Package Shape: SQUARE; Maximum Supply Voltage: 1.575 V;
EP2A15F672C8
EP2A25F1020C8
EP2A15B724C7N
EP2A15F672C9N
EP2A15B724C9N
EP2A25B724C8
EP2A15F672I8N
LOADABLE PLD; Form Of Terminal: BALL; No. of Terminals: 672; Package Code: BGA; Package Shape: SQUARE; Peak Reflow Temperature (C): 245;
EP2A15F672C7N
EP2A25B724I8
LOADABLE PLD; Form Of Terminal: BALL; No. of Terminals: 724; Package Code: BGA; Package Shape: SQUARE; Technology Used: CMOS;
EP2A15B724C8N
EP2A15F672C8N
EP2A15B724C7
EP2A15B724C8
EP2A15F672C7
EP2A25B724C7
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved