Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Median Price
$28.370
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$25.380
10k+ parts
$23.890
Digiode
$30.020
Vyrian
Chip Stock
Nova Conductors
Elcom Components
AZTECH Wire
$16.970
One Stop Electronics
$26.860
Ampacity Inc.
Semicontronic
$26.188
$26.054
Corphita
$28.440
Vigor
$30.340
MARBEL Systems
$43.739
$41.990
Texas Native Microelectronics
$50.275
$44.242
Advanced Electronics
$54.369
$49.476
$44.583
Kenton Components
$60.330
$53.090
Modulus Dynamics
$85.926
Qasali Group International
$135.742
$119.453
Corohmni
$166.756
Argo Parts USA
Microchip USA
Glotronic Ltd.
Continental Prestige Electronics
Supply Digital
Emar International I/E
Bastille Electronics
Programmable Logic Devices (PLD) EPM570GT144C4N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM570GT144C4N Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - MAX II EOL-Reversal 19/Mar/2021 Mult Dev EOL 4/Dec/2020
PCN Design/Specification - Mult PN LABEL 01/08/2023 Quartus SW/Web Chgs 23/Sep/2021
PCN Packaging - Mult Dev Label CHG 24/Jan/2020 Mult Dev Label Chgs 24/Feb/2020
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
BSS138W-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Panjit International
National Semiconductor
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATF1504AS-10AU100-T
Microchip Technology
Microchip Technology's ATF1504AS-10AU100-T is a 5V EE PLD with 64 I/O lines, 10ns propagation delay, and 125MHz clock frequency. Ideal for industrial applications requiring high-speed data processing in a compact square package with gull wing terminals.
ATF1504ASV-15JC44
Atmel
Atmel's ATF1504ASV-15JC44 is a 64 macrocell EE PLD with 15ns propagation delay, suitable for applications requiring in-system programmability and a max clock frequency of 100MHz. With a package style of chip carrier and JTAG boundary scan test capability, it operates at temperatures ranging from 0 to 70°C.
5M570ZF256C5N
Altera
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
XC9572XL-10TQ100C
Xilinx
The Xilinx XC9572XL-10TQ100C is a 3.3V programmable logic device with 72 macro cells and 72 inputs/outputs. It features a propagation delay of 10ns, operates at a max clock frequency of 100MHz, and supports JTAG boundary scan testing. Ideal for applications requiring in-system programmability and high-speed data processing in commercial-grade environments.
ATF16V8CZ-15JU
ATF16V8CZ-15JU by Microchip Technology is a 5.5V PLD with 15ns propagation delay, suitable for industrial applications. Featuring 64 product terms and 8 I/O lines, it operates at up to 45MHz clock frequency in temperatures ranging from -40°C to 85°C. This flash PLD in square chip carrier package offers versatile programmable logic solutions.
XC9572XL-7VQ64I
The Xilinx XC9572XL-7VQ64I is a 3.3V FLASH PLD with 72 macro cells, 36 inputs/outputs, and a clock frequency of 125MHz. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and operates b/w -40 to 85°C.
XC95108-15PC84C
XC95108-15PC84C by Xilinx is a 108 macrocell FLASH PLD with 15 ns propagation delay, operating at 5V. It features in-system programmability and JTAG boundary scan test for versatile applications in Programmable Logic Devices (PLD). With a package style of CHIP CARRIER and dimensions of 29.31mm x 29.31mm, it's suitable for commercial-grade projects requiring fast processing speeds.
ATF1504ASVL-20AU100
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPF10K50ETI144-2
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
ATF22V10CQZ-20PC
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
SLG46880VTR
Renesas Electronics
SLG46880VTR by Renesas Electronics is a 32-terminal PLD with 12 macro cells and 18 inputs. Operating b/w -40 to 85 °C, it has a max supply voltage of 5.5 V and min of 2.3 V. Ideal for applications requiring programmable ICs in compact spaces like consumer electronics or industrial control systems.
5M2210ZF256I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
EPM3128ATC144-7N
Intel
EPM3128ATC144-7N by Intel is a 128 macrocell EE PLD with 96 I/O lines, operating at up to 129.9 MHz clock frequency. It features a propagation delay of 7.5 ns and can be in-system programmable for various applications requiring fast processing speeds and high I/O capabilities. The device comes in a square-shaped plastic/epoxy package with gull wing terminals, making it suitable for commercial-grade projects needing reliable programmable logic devices.
ATF22V10C-10SU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ATF22V10B-15GM/883
ATF22V10B-15GM/883 by Microchip Technology is a 5.5V PLD with 15ns propagation delay, ideal for MIL-STD-883 applications. Featuring CMOS technology, it offers 22 inputs and 10 I/O lines in a ceramic package suitable for military-grade environments at temperatures ranging from -55 to 125°C.
ATF22V10C-10NM/883
ATF22V10C-10NM/883 by Microchip Technology is a CMOS PAL-type PLD with 22 inputs, 10 I/O lines, and 10 outputs. It operates at a max clock frequency of 90 MHz with a propagation delay of 10 ns. Ideal for military applications due to MIL-STD-883 screening level and ceramic, metal-sealed package body material.
5M240ZM100I5N
5M240ZM100I5N by Intel is a FLASH PLD with 192 macro cells, 79 I/O lines, and a max clock frequency of 118.3 MHz. It is ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
ATF22V10CZ-15PC
XC9572XL-10VQ44C
Xilinx XC9572XL-10VQ44C is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 100MHz clock frequency. Ideal for applications requiring fast propagation delay of 10ns, such as in-system programmable devices needing FLASH PLD technology for versatile surface-mount designs.
EPM7128STC100-15
EPM7128STC100-15 by Intel is a 128 macrocell EE PLD with 84 I/O lines, in-system programmable with JTAG boundary scan test. It operates at a max clock frequency of 100 MHz and has a propagation delay of 15 ns. Ideal for applications requiring fast processing speeds and high I/O capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM570T100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
The Intel EPM570T100C5N is a Flash PLD with 440 macro cells, 76 I/O lines, and 8.7ns propagation delay. It uses CMOS technology and has a max supply voltage of 2.625V. Ideal for applications requiring programmable logic devices with fast signal processing capabilities.
EPM570T100I5N
EPM570T100I5N by Intel is a FLASH PLD with 440 macro cells, 76 I/O lines, and 8.7 ns propagation delay. Ideal for applications requiring in-system programmability, it operates at temperatures from -40 to 100°C and has a max supply voltage of 2.625 V.
The EPM570T100I5N by Altera is a programmable logic device with 440 macro cells and a propagation delay of 8.7 ns. It uses CMOS technology and has a maximum supply voltage of 2.625V. The package is a square TFQFP with 100 terminals and a pitch of 0.5 mm. This device is in-system programmable and its output function is macrocell. It is suitable for applications requiring flash PLD technology and can operate at 3.3V.
EPM570T144C5N
The EPM570T144C5N by Altera is a programmable logic device with 440 macro cells, a maximum supply voltage of 2.625V, and a propagation delay of 8.7ns. It is a CMOS technology-based IC with a package shape of square and a form of terminal as gull wing. This flash PLD is in-system programmable and has an output function of a macrocell. Its dimensions are 20mm in width and length, with a seated height of 1.6mm. This device is suitable for applications requiring low power consumption and high-speed performance.
EPM570F100I5N
The EPM570F100I5N by Altera is a programmable logic device with a maximum supply voltage of 2.625 V and a propagation delay of 8.7 ns. It has 440 macro cells and utilizes CMOS technology. This device is a flash PLD that is in-system programmable and has 76 I/O lines. Its package code is LBGA with a square shape and a grid array, low profile style. With its versatile features, it can operate at 3.3V and is suitable for applications requiring programmable logic.
EPM570F100I5N by Intel is a FLASH PLD with 440 macro cells and 76 I/O lines. It features a propagation delay of 8.7 ns, operates at a max supply voltage of 2.625 V, and has JTAG boundary scan test capability. Ideal for applications requiring fast processing speeds and high input/output capabilities in programmable logic devices (PLDs).
EPM570T144I5N
The Intel EPM570T144I5N is a FLASH PLD with 440 macro cells, 116 inputs/outputs, and 8.7 ns propagation delay. Ideal for applications requiring in-system programmability, it operates at temperatures from -40 to 100°C and has a max supply voltage of 2.625 V.
FLASH PLD; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE; In-System Programmable: YES;
EPM570F100C5N
Intel EPM570F100C5N is a PLD with 440 macro cells, 76 inputs/outputs, and 8.7ns propagation delay. Ideal for applications requiring FLASH PLD technology, it offers in-system programmability and JTAG boundary scan testing capabilities. With a low profile grid array package style, it operates b/w 0-85°C temperature range.
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: LBGA; Package Shape: SQUARE;
EPM570ZM144C7N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 144; Package Code: BGA; Package Shape: RECTANGULAR;
The Intel EPM570ZM144C7N is a FLASH PLD with 440 macro cells, 116 inputs/outputs, and 15.1 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems due to its CMOS technology and JTAG boundary scan test capability.
EPM570M100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
EPM570M100I5N
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE; Maximum Time At Peak Reflow Temperature (s): 30;
The Intel EPM570M100I5N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 8.7 ns propagation delay. It is used for programmable logic applications requiring fast processing speeds and high input/output capabilities. The device features in-system programmability and JTAG boundary scan testing for efficient development and debugging processes.
EPM570M100C4N
Intel's EPM570M100C4N is a 440 macrocell FLASH PLD with 76 I/O lines. It features a propagation delay of 7ns, operates at max supply voltage of 2.625V, and uses CMOS technology. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in a compact square package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved