Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATF1508AS-7AX100 by Microchip Technology is a 128 macrocell EE PLD with 7.5 ns propagation delay, suitable for applications requiring in-system programmability and output function from macrocells. It features a max clock frequency of 166.7 MHz, operates at temperatures b/w 0 to 70 °C, and has a package style of flatpack with thin profile and fine pitch terminals.
Median Price
$15.020
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$12.740
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$13.130
DigiKey
$13.137
Verical
$15.352
Digiode
$12.720
Nova Conductors
$15.662
Electro Sonic
$16.430
$14.030
$13.290
$13.090
Chip Stock
VNN
IBS Electronics
$17.966
Vyrian
Corphita
$12.051
Ampacity Inc.
$12.470
Semicontronic
$12.158
$12.096
Corohmni
$13.577
Advanced Electronics
$13.984
$13.285
Aranea Global
$15.349
$14.735
Continental Prestige Electronics
$15.660
$15.347
Microchip USA
$42.056
Vigor
$120.000
Aztec Data Supply Inc.
$122.120
Marpe Global Electronics
QualityLine Systems
XL Components Corporation
Glotronic Ltd.
Supply Digital
Argo Parts USA
Perfect Parts
Kepictronics
PLASTIC material provides durability and reliability while EPOXY enhances resistance to heat and moisture, making it suitable for various environments.
Low propagation delay allows for fast signal processing and efficient performance.
Higher supply voltage allows for flexibility in voltage requirements and compatibility with a wide range of systems.
Higher number of macro cells provide increased logic capacity and flexibility in design implementation.
GULL WING terminals allow for easy surface mount installation and facilitate efficient soldering.
EE PLD technology enables easy reprogramming and customization of logic functions, enhancing product versatility.
Small terminal pitch enables high-density packaging and space-efficient design layouts.
High clock frequency supports fast data processing and real-time operations, suitable for time-sensitive applications.
Programmable Logic Devices (PLD) ATF1508AS-7AX100 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
ATF1508AS-7AX100 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EPM3064ATI44-10N
Altera
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
EPM570T100C3N
Intel
EPM570T100C3N by Intel is a Programmable Logic Device with 440 macro cells, 76 inputs/outputs, and a propagation delay of 5.4 ns. It uses CMOS technology and is suitable for applications requiring in-system programmability and JTAG boundary scan testing in electronic systems.
GAL16V8D-25LPNI
Lattice Semiconductor
GAL16V8D-25LPNI by Lattice Semiconductor is a CMOS PLD with 25ns propagation delay, 5.5V max supply voltage, and 64 product terms. Ideal for industrial applications requiring a PAL-type architecture, it features 8 dedicated inputs and outputs, operates b/w -40 to 85°C, and supports a clock frequency of up to 37MHz.
ATF16V8CZ-15XU
Microchip Technology
ATF16V8CZ-15XU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 64 product terms and 8 I/O lines, it operates b/w -40 to 85°C with a clock frequency of up to 45MHz. This flash PLD in a small outline package is surface mountable and has industrial-grade temperature grading.
5M160ZE64I5N
Intel 5M160ZE64I5N is a PLD with 128 macro cells, CMOS technology, and 14 ns propagation delay. Ideal for applications requiring in-system programmability, it features 54 I/O lines, operates at up to 118.3 MHz clock frequency, and supports JTAG boundary scan testing.
EPM3128ATC100-7N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
ATF1508AS-10AU100
Microchip ATF1508AS-10AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 125 MHz clock frequency, has 10 ns propagation delay, and supports in-system programming. Ideal for industrial applications requiring fast processing and versatile I/O capabilities.
EPM570M100I5N
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE; Maximum Time At Peak Reflow Temperature (s): 30;
ATF16V8B-15JU
ATF16V8B-15JU by Microchip is a 5.5V PLD with 15ns propagation delay, suitable for industrial applications. Features 18 inputs, 8 I/O lines, and 8 outputs with a max clock frequency of 45MHz. Ideal for PAL-type architecture designs requiring fast processing speeds in compact spaces.
ATF1504AS-10JU44
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EPM3128ATC144-10N
The EPM3128ATC144-10N by Altera is a programmable logic device (PLD) with 128 macro cells. It has a maximum supply voltage of 3.6V and a propagation delay of 10ns. This CMOS technology-based PLD is surface mountable and has a square package shape with gull wing terminals. It operates on a nominal supply voltage of 3.3V and has a wide temperature range of 0 to 70°C. With its in-system programmability and JTAG boundary scan test capability, it offers flexibility and ease of use. The device also features 96 I/O lines and a maximum clock frequency of 98MHz, making it suitable for various applications that require high-speed data processing and control functions.
LC4064ZE-7TN48I
LC4064ZE-7TN48I by Lattice Semiconductor is a 64 macrocell EE PLD with 7.5 ns propagation delay, ideal for applications requiring in-system programmability and 111 MHz clock frequency. With a square package and GULL WING terminals, it offers 32 I/O lines and JTAG boundary scan test capability.
ATF16V8B-15SU
ATF16V8B-15SU by Microchip Tech is a 5.5V PLD with 15ns propagation delay, suitable for industrial use. Features 18 inputs, 8 I/O lines, and operates at max clock frequency of 45MHz. Ideal for applications requiring fast logic processing in compact designs.
5M160ZE64C5
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
M4A5-192/96-10VNC
M4A5-192/96-10VNC by Lattice Semiconductor is a 192 macrocell EE PLD with 96 I/O lines, operating at up to 62.5 MHz. It features a propagation delay of 10 ns and can be in-system programmable for various applications requiring fast processing speeds and high I/O capabilities. The device comes in a square package with gull wing terminals, making it suitable for commercial temperature environments.
XC95288XL-10PQG208I
Xilinx
XC95288XL-10PQG208I by Xilinx is a 288 macrocell FLASH PLD with 168 I/O lines, operating at up to 100 MHz. It features a propagation delay of 10 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing in a compact square package with gull wing terminals.
ISPLSI1048E-70LQI
ISPLSI1048E-70LQI by Lattice Semiconductor is a 192 macrocell EE PLD with 18.5ns propagation delay, operating at up to 56MHz clock frequency. Ideal for industrial applications, it features in-system programmability and 96 I/O lines in a square package with GULL WING terminals.
ATF22V10CZ-15PI
ATF22V10CZ-15PI by Microchip Technology is a 24-terminal PLD with 15ns propagation delay and 5.5V max supply voltage. Ideal for industrial applications, it features CMOS technology, FLASH PLD type, and operates at up to 55.5MHz clock frequency.
M4A5-32/32-10VNC48
M4A5-32/32-10VNC48 by Lattice Semiconductor is a programmable logic device with 32 macro cells and 34 inputs. It has a max clock frequency of 62.5 MHz and can be used for applications requiring in-system programmability and PAL-type architecture.
XCR3256XL-10TQG144I
Xilinx XCR3256XL-10TQG144I is a 256 macrocell EE PLD with 120 I/O lines, operating at max 105 MHz. It has a propagation delay of 10 ns and supports in-system programmability. Ideal for industrial applications requiring high-speed processing within the temperature range of -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF1504AS-10JU44 by Microchip Technology is a programmable logic device (PLD) with 64 macro cells and 32 inputs/outputs. It has a max clock frequency of 125 MHz and can be used for in-system programming, making it suitable for industrial applications.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
ATF1504AS-10AU44
Microchip Technology's ATF1504AS-10AU44 is a 5.5V PLD with 10ns propagation delay, 64 macro cells, and 32 inputs. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and operates at temperatures ranging from -40 to 85°C.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
ATF1508ASV-15AU100
Microchip's ATF1508ASV-15AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 3.3V, has a propagation delay of 15ns, and supports in-system programming. Ideal for industrial applications requiring high clock frequencies up to 100MHz.
ATF1504AS-10AU100
Microchip Technology's ATF1504AS-10AU100 is a 64 macro cell EE PLD with 64 inputs/outputs and 40 product terms. It operates at a max clock frequency of 125 MHz, with a propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF1504ASV-15AU44
ATF1508ASV-15AU100-T
Microchip Technology's ATF1508ASV-15AU100-T is a 3.3V EE PLD with 15ns propagation delay and 100 terminals. Ideal for industrial applications, it features a max clock frequency of 100MHz, 80 I/O lines, and operates b/w -40 to 85°C.
ATF1504ASVL-20AU44
Microchip Technology's ATF1504ASVL-20AU44 is a 3.3V EE PLD with 32 I/O lines and 20ns propagation delay. Ideal for industrial applications, it features a max clock frequency of 83.3MHz and operates b/w -40 to 85°C, making it suitable for various programmable logic tasks.
ATF1508ASL-25AU100
Microchip ATF1508ASL-25AU100 is a 128 macrocell EE PLD with 25ns propagation delay, in-system programmable, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed processing up to 33.3MHz, with a wide operating temperature range from -40°C to 85°C. Package style is flatpack, thin profile, fine pitch for compact designs.
ATF1504AS-10AU44-T
Microchip Technology's ATF1504AS-10AU44-T is a 32 I/O EE PLD with 10 ns propagation delay and 125 MHz clock frequency. Ideal for industrial applications, this PLD features a max supply voltage of 5.5 V and operates in temperatures ranging from -40 to 85 °C.
ATF1504AS-10JU84
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Microchip Technology's ATF1504AS-10JU84 is a 64 macrocell EE PLD with 32 inputs/outputs, 40 product terms, and 10ns propagation delay. Ideal for industrial applications, it operates b/w -40 to 85°C, supports JTAG boundary scan test, and has a max clock frequency of 125MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved