Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE;
Median Price
$130.281
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
$119.800
100+ parts
$112.610
1k+ parts
$105.420
10k+ parts
-
DigiKey
Verical
$140.762
$131.775
Digiode
$132.478
Vyrian
$139.450
Andel Nordic
$15.540
$10.877
MARBEL Systems
$42.440
$40.743
Texas Native Microelectronics
$48.782
$42.928
Kenton Components
$58.538
$51.514
Modulus Dynamics
$78.012
One Stop Electronics
$118.530
Semicontronic
$115.567
$114.974
Corphita
$125.505
Qasali Group International
$131.711
$115.906
Vigor
$133.860
Microchip USA
$134.360
Corohmni
Northwest PG Solutions
Supply Digital
Native Components
Programmable Logic Devices (PLD) EP20K200FC484-1XV attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
Output Function:
No. of Dedicated Inputs:
No. of I/O Lines:
Propagation Delay:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EP20K200FC484-1XV Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.D
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Toshiba
Weitronic Enterprise
ATF16V8BQL-15SU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
EPM7128SLC84-10N
Altera
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
EPM1270F256I5N
The EPM1270F256I5N by Altera is a programmable logic device with 980 macro cells. It has a maximum supply voltage of 2.625V and uses CMOS technology. It is a flash PLD that is in-system programmable. The package style is grid array, with 256 terminals. Its top application is as a macrocell output function.
ATF1502ASV-15AU44
Microchip Technology
Microchip Technology's ATF1502ASV-15AU44 is a 32 macrocell EE PLD with 15 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 100 MHz and has in-system programmability, making it ideal for high-speed digital designs. The device features JTAG boundary scan testing and can withstand temperatures ranging from -40 to 85°C.
5M570ZF256I5N
Intel
Intel's 5M570ZF256I5N is a FLASH PLD with 440 macro cells, 159 I/O lines, and max clock frequency of 118.3 MHz. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan test capability. Operating temperature range from -40 to 100°C makes it suitable for various environments.
EPM3512AQC208-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
LC4512V-75TN176C
Lattice Semiconductor
LC4512V-75TN176C by Lattice Semiconductor is a 512 macrocell EE PLD with 132 inputs and 128 I/O lines. Featuring a propagation delay of 7.5 ns, it operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in a compact flatpack package.
5M80ZE64C5N
The Intel 5M80ZE64C5N is a Flash PLD with 64 macro cells, operating at a max clock frequency of 118.3 MHz. It features a propagation delay of 14 ns and can be used for applications requiring in-system programmability and JTAG boundary scan testing.
EP20K160ETC144-2X
EP20K160ETC144-2X by Intel is a PLD with 6400 logic cells, 1.93 ns propagation delay, and 160 MHz max clock frequency. Ideal for applications requiring high-speed processing and complex logic functions in a compact form factor.
XC2C32A-6CPG56I
Xilinx
XC2C32A-6CPG56I by Xilinx is a 32 macrocell FLASH PLD with 6 ns propagation delay, operating at up to 300 MHz. Ideal for industrial applications, it features in-system programmability, 33 I/O lines, and JTAG boundary scan testing capabilities.
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
LC4032ZC-75TN48E
LC4032ZC-75TN48E by Lattice Semiconductor is a 32-macrocell EE PLD with 36 inputs and 32 I/O. Featuring a propagation delay of 7.5 ns, it operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in a compact square package.
ATF1502AS-10JU44
Microchip Technology's ATF1502AS-10JU44 is a 32 macrocell EE PLD with 36 inputs and 32 I/O lines. With a propagation delay of 10 ns and max clock frequency of 83.33 MHz, it is ideal for PAL-type applications requiring fast processing speeds in programmable logic devices. The device is surface mountable, has JTAG boundary scan test capability, and operates b/w -40 to 85°C temperatures.
XC2C32A-6CPG56C
The Xilinx XC2C32A-6CPG56C is a 32 macrocell FLASH PLD with 6 ns propagation delay, suitable for applications requiring in-system programmability and JTAG boundary scan test. It operates at a max clock frequency of 300 MHz, has 33 I/O lines, and supports a commercial temperature range of 0 to 70°C.
5M1270ZT144C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
ATF22LV10C-10JU
ATF22LV10C-10JU by Microchip Technology is a 3.3/5V CMOS PLD with 10ns propagation delay, 132 product terms, and 71.4MHz max clock frequency. Ideal for PAL-type applications requiring FLASH PLDs in a square chip carrier package with 10 dedicated inputs and outputs.
XCR3128XL-10VQ100I
Xilinx XCR3128XL-10VQ100I is a 128 macrocell EE PLD with 84 I/O lines, operating at max 95 MHz clock frequency. It has in-system programmability and JTAG boundary scan test support. Ideal for industrial applications requiring fast processing and high I/O capabilities in compact form factor.
5M1270ZF256C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
5M2210ZF256C4N
5M570ZT144C4
The Intel 5M570ZT144C4 is a FLASH PLD with 114 I/O lines, operating at up to 184.1 MHz clock frequency. It features a propagation delay of 9.5 ns and operates within a temperature range of 0-85°C. Ideal for applications requiring high-speed data processing and versatile I/O configurations in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EP20K100EQC240-2N
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
EP20K30EFC324-3
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 324; Package Code: BGA; Package Shape: SQUARE;
EP20K400FC672-1X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 672; Package Code: BGA; Package Shape: SQUARE;
EP20K200EQC208-2X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EP20K100EBC356-2X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 356; Package Code: LBGA; Package Shape: SQUARE;
EP20K100EBC356-3
EP20K100EBC356-3N
EP20K100EQC240-2X
EP20K200EQI240-2X
LOADABLE PLD; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE; Power Supplies (V): 1.8,1.8/3.3;
LOADABLE PLD; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE; Propagation Delay: 1.97 ns;
EP20K100EQC208-1X
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved