Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATF22V10CQZ-20SI by Microchip Technology is a 24-terminal PLD with 20ns propagation delay and 5.5V max supply voltage. It features CMOS technology, flash PLD type, and macrocell output function. Ideal for industrial applications requiring high clock frequency up to 38.5MHz in compact small outline package style.
Median Price
$2.275
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.030
1k+ parts
$1.820
10k+ parts
$1.710
DigiKey
$2.680
Verical
$2.138
Nova Conductors
$2.020
Digiode
$2.147
VNN
Mil-Aero Solutions, Inc.
DigiKey Marketplace
Vyrian
Greenchips
SIE Connect GmbH - GreenChips
Ampacity Inc.
$1.920
Semicontronic
$1.872
$1.862
Aranea Global
$1.980
$1.900
Argo Parts USA
Continental Prestige Electronics
Corphita
$2.034
Vigor
$2.170
Aztec Data Supply Inc.
$42.958
Corohmni
$159.781
Marpe Global Electronics
QualityLine Systems
Supply Digital
XL Components Corporation
Microchip USA
PLASTIC/EPOXY - Durable and cost-effective material choice for a wide range of applications.
20 ns - Fast signal processing speed, ideal for time-sensitive operations.
YES - Easy to integrate into surface mount applications for efficient PCB design.
5.5 V - Versatile voltage range for compatibility with various systems.
CMOS - Low power consumption and high noise immunity for reliable performance.
RECTANGULAR - Space-efficient design for compact system layouts.
GULL WING - Secure and reliable terminal connection for enhanced durability.
5 - Standard voltage level for easy integration into existing systems.
24 - Sufficient number of terminals for versatile connectivity options.
FLASH PLD - Easily reprogrammable for flexible system customization.
SMALL OUTLINE - Compact package size for space-constrained applications.
MACROCELL - Enhanced functionality for complex operations in a single cell.
4.5 V - Wide voltage input range for flexibility in power requirements.
85 °C - High-temperature tolerance for reliable operation in harsh environments.
1.27 mm - Standard terminal pitch for easy PCB layout and design.
11 DEDICATED INPUTS, 10 I/O - Versatile input/output configuration for diverse applications.
11 - Sufficient number of inputs for versatile connectivity options.
40 °C - Wide temperature range for operation in extreme conditions.
DUAL - Dual position terminals for secure and reliable connection options.
2.65 mm - Low-profile design for space-constrained applications.
7.5 mm - Compact width for easy integration into various system designs.
38.5 MHz - High clock frequency for fast and efficient operation.
15.4 mm - Compact length for space-efficient system integration.
10 - Sufficient number of I/O lines for versatile connectivity options.
INDUSTRIAL - Industrial-grade temperature rating for reliable performance in demanding environments.
Programmable Logic Devices (PLD) ATF22V10CQZ-20SI attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
Organization:
Output Function:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
JESD-30 Code:
ATF22V10CQZ-20SI Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
5M2210ZF256C4N
Intel
Intel's 5M2210ZF256C4N is a FLASH PLD with 1700 macro cells, 203 I/O lines, and 247.5 MHz clock frequency. Ideal for applications requiring high-speed processing and extensive input/output capabilities in programmable logic devices.
LC4032ZE-7TN48I
Lattice Semiconductor
LC4032ZE-7TN48I by Lattice Semiconductor is a 32 macrocell EE PLD with 7.5 ns propagation delay and 111 MHz max clock frequency. Ideal for applications requiring in-system programmability, it features 4 dedicated inputs, 32 I/O lines, and JTAG boundary scan test capability.
LC4032V-5TN44I
LC4032V-5TN44I by Lattice Semiconductor is a 32 macrocell EE PLD with 5 ns propagation delay and 156 MHz clock frequency. Ideal for applications requiring fast processing speeds, it features in-system programmability, 30 I/O lines, and JTAG boundary scan testing capabilities.
SLG46855VTR
Renesas Electronics
SLG46855VTR by Renesas Electronics is a 15-cell OT PLD with 11 inputs/outputs, operating at 2.3-5.5 V and -40 to 85°C. It comes in a rectangular chip carrier package, suitable for applications requiring macrocell output functions in compact designs.
LC4256V-3TN100C
LC4256V-3TN100C by Lattice Semiconductor is a 256 macrocell EE PLD with 74 inputs and 64 I/O lines. It has a propagation delay of 3 ns, operates at a max frequency of 212 MHz, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high I/O capabilities in compact designs.
EPF10K20RC240-4N
Intel's EPF10K20RC240-4N is a PLD with 1152 logic cells, 0.6 ns propagation delay, and 67.11 MHz max clock frequency. Ideal for applications requiring high-speed processing and complex logic functions in commercial-grade environments.
EPF10K200SRC240-3
Intel's EPF10K200SRC240-3 is a PLD with 9984 logic cells, 0.8 ns propagation delay, and 182 inputs/outputs. It operates at 2.5V with CMOS technology, suitable for applications requiring fast processing speeds and high I/O capabilities in commercial-grade environments.
5M240ZT100A5N
Intel's 5M240ZT100A5N is a PLD with 192 macro cells, 17.7ns propagation delay, and in-system programmability. Ideal for industrial applications requiring fast processing speeds and low power consumption.
5M80ZT100C5N
Intel's 5M80ZT100C5N is a PLD with 64 macro cells, 118.3 MHz clock frequency, and 14 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.
M4A5-64/32-10VNC
M4A5-64/32-10VNC by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs and 32 I/O lines. Featuring a propagation delay of 10 ns, it operates at a max clock frequency of 62.5 MHz. Ideal for applications requiring programmable logic devices with in-system programmability and JTAG boundary scan test capabilities.
EPF10K100ARI240-3N
Altera
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
ATF1508ASL-25AU100
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPM7064STC44-10N
EPM7064STC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations in commercial-grade environments.
EPM3032ALC44-10N
The EPM3032ALC44-10N by Altera is a CMOS programmable logic device with 32 macro cells. It has a maximum clock frequency of 103.1 MHz and a propagation delay of 10 ns. This PLD is surface mountable and has a package shape of square. It is commonly used in applications requiring in-system programmability and output function of macrocell.
5962-8867005LA
Defense Logistics Agency
Defense Logistics Agency's 5962-8867005LA is a MIL-STD-883 compliant PLD with 15ns propagation delay, 5.5V max supply voltage, and CMOS technology. It features 11 dedicated inputs, 10 I/O lines, and operates b/w -55 to 125 °C. Ideal for military applications requiring high-speed processing in harsh environments.
PALCE22V10-10JCR
Cypress Semiconductor
PALCE22V10-10JCR by Cypress Semiconductor is a 28-terminal PLD with 10ns propagation delay and 76.9MHz clock frequency. Ideal for applications requiring FLASH PLD technology, such as high-speed digital systems. Operates b/w 0-75°C with a supply voltage range of 4.75-5.25V, making it suitable for commercial extended temperature environments.
5M40ZE64A5N
The Intel 5M40ZE64A5N is a FLASH PLD with 54 I/O lines, operating at temperatures from -40 to 125 °C. It features a max supply voltage of 1.89 V and is designed for automotive applications requiring programmable logic devices in a compact square package.
GAL22V10D-15LPNI
GAL22V10D-15LPNI by Lattice Semiconductor is a 5.5V CMOS PLD with 15ns propagation delay, ideal for industrial applications. Featuring 22 inputs, 10 I/O lines, and a clock frequency of up to 55.5MHz, it offers versatile programmable logic capabilities in a rectangular package with through-hole terminals.
5M160ZE64C5
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
LC4256ZE-7TN144I
LC4256ZE-7TN144I by Lattice Semiconductor is a 256 macrocell EE PLD with 96 I/O lines, 7.5 ns propagation delay, and 111 MHz max clock frequency. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF22V10C-15PU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Microchip Technology
ATF22V10C-15PU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 55.5MHz in industrial settings. With a compact rectangular package style and through-hole terminals, it's suitable for various programmable logic tasks.
ATF22V10CQZ-20PU
ATF22V10CQZ-20PU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 38.5MHz in industrial settings. With a rectangular package shape and through-hole terminals, it is designed for efficient programmable logic solutions.
ATF22V10C-10JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ATF22V10C-10JU by Microchip Technology is a 5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 90MHz. This flash PLD in a chip carrier package is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10C-10PU
ATF22V10C-10PU by Microchip Technology is a 5.5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 90MHz and includes 132 product terms for versatile programming options. With a rectangular package shape and through-hole terminals, this flash PLD is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10C-15JU
ATF22V10CQZ-20SU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ATF22V10CQZ-20SU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style for efficient integration into electronic systems.
ATF22V10CQ-15JU
Microchip's ATF22V10CQ-15JU is a 5.5V CMOS PLD with 15ns propagation delay, featuring 22 inputs and 10 I/O lines. Ideal for industrial applications, it offers a max clock frequency of 55.5MHz and supports up to 132 product terms in a square chip carrier package.
ATF22V10C-7PX
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
ATF22V10C-10XU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
ATF22V10C-10XU by Microchip Technology is a programmable logic device (PLD) with 22 inputs and 10 outputs. It has a propagation delay of 10 ns and operates at a max clock frequency of 90 MHz. This PLD is commonly used in industrial applications requiring high-speed data processing.
ATF22V10CQZ-20JU
ATF22V10CQZ-20JU by Microchip: 20ns Propagation Delay, 5.5V Max Supply Voltage, CMOS Tech. Ideal for PAL-TYPE applications with 22 inputs, 10 I/O lines, and a max clock frequency of 38.5MHz in industrial settings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved