Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
Median Price
$137.025
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
$126.000
100+ parts
$118.440
1k+ parts
$110.880
10k+ parts
-
DigiKey
Verical
$148.050
$138.600
Digiode
$139.336
Vyrian
$146.670
Andel Nordic
$2.955
$2.837
Modulus Dynamics
$122.759
Semicontronic
$124.670
$121.553
$120.930
One Stop Electronics
Corphita
$132.003
Vigor
$140.800
Microchip USA
$141.300
$140.300
$139.800
$139.300
Corohmni
Texas Native Microelectronics
$149.282
$143.311
$138.832
$131.368
Kenton Components
$179.138
$171.973
$166.599
$157.642
Qasali Group International
$403.061
Supply Digital
Northwest PG Solutions
MARBEL Systems
Native Components
Programmable Logic Devices (PLD) EP20K200CQ208C7 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Dedicated Inputs:
No. of Logic Cells:
No. of I/O Lines:
Propagation Delay:
Technology:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EP20K200CQ208C7 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Transys Electronics
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Eic Semiconductor
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Fairchild Semiconductor
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LC4256V-75TN176C
Lattice Semiconductor
LC4256V-75TN176C by Lattice Semiconductor is a 3.3V EE PLD with 256 macro cells, 132 inputs, and 128 I/O lines. With a propagation delay of 7.5 ns and max clock frequency of 111 MHz, it's ideal for applications requiring fast processing speeds in programmable logic devices. The device is surface mountable and features JTAG boundary scan test capability for efficient testing processes.
ATF1508ASVL-20AU100
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
XC2C32A-4VQ44C
Xilinx
Xilinx XC2C32A-4VQ44C is a 32 macrocell FLASH PLD with 4 ns propagation delay, operating at up to 450 MHz clock frequency. It features 33 I/O lines, in-system programmability, and JTAG boundary scan test for versatile applications in programmable logic devices.
LC4064ZE-7TN100C
LC4064ZE-7TN100C by Lattice Semiconductor is a 64-macrocell EE PLD with 7.5ns propagation delay, 111MHz clock frequency, and 1.9V max supply voltage. Ideal for applications requiring in-system programmability, it features 10 dedicated inputs and 64 I/O lines in a low-profile flatpack package with 0.5mm terminal pitch.
EPM3064ATC44-10N
Altera
The EPM3064ATC44-10N by Altera is a programmable logic device (PLD) with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 3.6 V. This CMOS technology-based PLD is surface mountable and has a square package shape. Its in-system programmability and JTAG boundary scan test capability make it suitable for various applications in need of a high clock frequency and versatile I/O options.
LC4256ZE-7TN144I
LC4256ZE-7TN144I by Lattice Semiconductor is a 256 macrocell EE PLD with 96 I/O lines, 7.5 ns propagation delay, and 111 MHz max clock frequency. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in compact designs.
M4A5-64/32-10VNI
M4A5-64/32-10VNI by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs and 32 I/O lines. It operates at a max clock frequency of 62.5 MHz, making it suitable for industrial applications requiring fast processing speeds. With in-system programmability and JTAG boundary scan test capability, this PLD offers flexibility and ease of testing during development.
EPF10K50VRI240-4
Intel
Intel's EPF10K50VRI240-4 is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 3.6 V max supply voltage. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact 32mm square package.
ATF1504AS-7AX100
Microchip Technology
ATF1504AS-7AX100 by Microchip Technology is a 64 macrocell EE PLD with 7.5 ns propagation delay and 166.7 MHz max clock frequency. Ideal for applications requiring in-system programmability, it features 64 I/O lines, JTAG boundary scan test, and operates b/w 0 to 70 °C temperature range.
EPM7064SLC44-5N
The EPM7064SLC44-5N by Altera is a programmable logic device with 64 macro cells. It operates at a maximum clock frequency of 250 MHz and has a propagation delay of 5 ns. This device is surface mountable and can be programmed in-system. It has 36 I/O lines and supports configurable I/O operation with 3.3V or 5V. The package shape is square with a J bend terminal form. With a package code of QCCJ, it has a maximum seated height of 4.572 mm. This PLD is commonly used for various applications that require programmable logic functions.
XC95288XL-10TQG144C
The Xilinx XC95288XL-10TQG144C is a FLASH PLD with 288 macro cells, 117 I/O lines, and 100 MHz clock frequency. It operates at a max supply voltage of 3.6V and has a propagation delay of 10ns. Ideal for applications requiring programmable logic devices in commercial temperature environments.
ATF1504ASVL-20AU44
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
XC2C384-10FTG256I
Xilinx XC2C384-10FTG256I is a 384 macrocell FLASH PLD with 212 I/O lines. It operates at max clock freq of 83MHz, has propagation delay of 10ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring in-system programmable logic devices with low profile grid array package style.
LC4032V-25TN44C
LC4032V-25TN44C by Lattice Semiconductor is a 32 macrocell EE PLD with 2.5 ns propagation delay, 30 I/O lines, and max clock frequency of 250 MHz. Ideal for applications requiring fast processing speeds and high input/output capabilities in programmable logic devices.
EP1K30TI144-2N
EP1K30TI144-2N by Intel is a PLD with 1728 logic cells, 0.4 ns propagation delay, and 102 inputs/outputs. It uses CMOS technology and operates at a max clock frequency of 37.5 MHz. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact form factor.
EPM7160ELC84-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
EPM570GT100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EP20K100EQC240-2N
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
EP1K50TI144-2
EP1K50TI144-2 by Intel is a programmable logic device (PLD) with 2880 logic cells. It has a propagation delay of 0.4 ns and operates at a max clock frequency of 37.5 MHz. This PLD is commonly used in industrial applications requiring high-speed processing and versatile programming capabilities.
EP1K50TI144-2N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EP20K160ETC144-2X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EP20K30EFC324-3
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 324; Package Code: BGA; Package Shape: SQUARE;
EP20K400FC672-1X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 672; Package Code: BGA; Package Shape: SQUARE;
EP20K200EQC208-2X
EP20K100EBC356-2X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 356; Package Code: LBGA; Package Shape: SQUARE;
EP20K100EBC356-3
EP20K100EBC356-3N
EP20K100EQC240-2X
EP20K200EQI240-2X
LOADABLE PLD; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE; Power Supplies (V): 1.8,1.8/3.3;
LOADABLE PLD; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE; Propagation Delay: 1.97 ns;
EP20K100EQC208-1X
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved