Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Xilinx XC9572XL-7TQG100I is a 72 macrocell FLASH PLD with 7.5 ns propagation delay and 125 MHz max clock frequency. Ideal for industrial applications, it features in-system programmability, 72 I/O lines, and JTAG boundary scan test capability.
Median Price
$21.130
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Farnell
1+ parts
$16.790
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
Element14
$22.396
Digiode
$15.950
VNN
Nova Conductors
$21.140
Vyrian
Vigor
$8.190
One Stop Electronics
$14.270
Semicontronic
$13.913
$13.842
Ampacity Inc.
Continental Prestige Electronics
$14.330
Corphita
$15.111
Aranea Global
$20.717
$19.889
Microchip USA
$48.620
$47.780
$47.350
$46.930
Corohmni
$70.508
Modulus Dynamics
$108.239
Texas Native Microelectronics
$175.343
$154.302
Kenton Components
$210.412
$201.995
$195.683
$185.162
Qasali Group International
$473.426
$440.286
Lixinc
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
MARBEL Systems
Authorized Procurement Solutions
Argo Parts USA
Kepictronics
Supply Digital
Metaverse IC Inc.
GreenTree Electronics
EMSNET (Excess)
PLASTIC/EPOXY material is lightweight, durable, and cost-effective, making the device easy to handle and suitable for various applications.
Low propagation delay ensures fast processing of signals, making the device efficient for time-critical applications.
Surface mount technology allows for easy and secure placement on PCBs, saving space and enabling high-density designs.
Support for a maximum supply voltage of 3.6 V allows for compatibility with a wide range of systems and power sources.
A high number of macro cells provide flexibility in designing complex logic functions and accommodating diverse system requirements.
CMOS technology offers low power consumption and high noise immunity, enhancing the efficiency and reliability of the device.
Having 72 inputs allows for extensive connectivity and input/output configurations, enabling versatile use in various applications.
Square package shape facilitates easy and efficient placement on PCBs, optimizing space utilization and ensuring compatibility with standard layouts.
A nominal supply voltage of 3.3 V is commonly used in electronic systems, ensuring compatibility and ease of integration with existing designs.
Support for multiple power supply voltages allows for versatile operation and compatibility with a range of system requirements and configurations.
Having 100 terminals offers extensive connectivity options and flexibility in interfacing with other components, making the device highly adaptable to various systems.
Being a FLASH PLD allows for reprogramming and reconfiguring logic functions, making the device versatile, adaptable, and suitable for rapidly changing requirements.
The combination of flatpack, low profile, and fine-pitch package styles ensures space-efficient and reliable PCB assembly, ideal for compact and high-performance applications.
In-system programmability enables easy updates and modifications to logic functions without removing the device from the system, enhancing flexibility and facilitating rapid prototyping and testing.
Outputting as macrocells enables versatile and customizable logic functions, allowing for efficient implementation of complex operations and configurations.
Support for a minimum supply voltage of 3 V ensures reliable operation and compatibility with a wide range of power sources and system requirements.
With a high maximum operating temperature of 85°C, the device can withstand elevated temperatures and harsh environmental conditions, suitable for industrial applications.
Having a small terminal pitch of 0.5 mm allows for high-density interconnects, enabling compact and efficient PCB layouts and connections.
Dedicated inputs combined with 72 I/O lines provide a structured and organized configuration for efficient logic operations and connectivity requirements.
With a low minimum operating temperature of -40°C, the device can function reliably in cold environments, enhancing its versatility and applicability.
Matte tin terminal finishing offers good conductivity, corrosion resistance, and solderability, ensuring reliable and durable connections, especially in harsh operating conditions.
Quad terminal positioning simplifies PCB assembly and allows for secure and stable connections, enhancing reliability and ease of installation.
MSL 3 rating indicates moderate sensitivity to moisture, requiring standard handling and storage procedures to maintain component integrity and reliability.
With a low maximum seated height of 1.6 mm, the device offers a compact form factor and facilitates space-efficient PCB design, ideal for size-constrained applications.
A width of 14 mm provides a compact footprint, enabling efficient PCB layout and integration into space-limited systems while maintaining high performance and functionality.
Support for a high maximum clock frequency of 125 MHz allows for rapid signal processing and high-speed operations, making the device suitable for demanding applications.
Having 72 outputs offers extensive connectivity and output options, enabling the device to drive multiple components and interface with various parts of a system effectively.
The device can withstand a maximum time of 30 seconds at peak reflow temperature, ensuring proper soldering and assembly processes without compromising component integrity.
Support for a peak reflow temperature of 260°C allows for reliable and robust soldering processes, ensuring secure connections and long-term performance.
A length of 14 mm contributes to the compact form factor and efficient PCB layout, allowing for easy integration into various electronic systems while maintaining high functionality.
JTAG boundary scan test capability enables efficient testing and debugging of the device, ensuring reliable performance and simplifying the development and validation process.
Having 72 I/O lines offers extensive connectivity options, enabling versatile interfacing and efficient data exchange with other components and systems.
Industrial-grade temperature grading indicates reliable operation in harsh environmental conditions and ensures durability and performance stability in demanding industrial applications.
Programmable Logic Devices (PLD) XC9572XL-7TQG100I attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Xilinx
Programmable IC Type:
In-System Programmable:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
XC9572XL-7TQG100I Programmable ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev LeadFrame Chg 29/Oct/2018
Xilinx, Inc. (XIlinx) in February 2022 acquired by AMD
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPM3032ATI44-10N
Altera
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
ATF16V8C-7SU
Microchip Technology
ATF16V8C-7SU by Microchip Technology is a PLD with 7.5ns propagation delay, 18 inputs, and 64 product terms. It is used in applications requiring high-speed processing, such as industrial control systems and communication equipment. The device operates at a max clock frequency of 100MHz and has a compact rectangular package style for surface mount assembly.
LC4032V-10TN48I
Lattice Semiconductor
LC4032V-10TN48I by Lattice Semiconductor is a 32 macrocell EE PLD with 36 inputs and 32 I/O. It operates at a max clock frequency of 86 MHz, has a propagation delay of 10 ns, and can be in-system programmed. Ideal for applications requiring fast processing speeds and programmable logic functionality.
EPM3512AQC208-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
5M570ZM100I5N
Intel
Intel's 5M570ZM100I5N is a FLASH PLD with 440 macro cells, 74 I/O lines, and 118.3 MHz clock frequency. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
5M40ZE64A5N
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
EPM3064ATC100-10N
Intel's EPM3064ATC100-10N is a 64-macrocell EE PLD with 10ns propagation delay, operating at max 100MHz clock frequency. It features in-system programmability and JTAG boundary scan test for versatile applications in commercial-grade systems requiring fast processing speeds. The device supports a wide voltage range of 2.5/3.3V and has 66 I/O lines for efficient data transfer in various electronic designs.
EPM7064STC44-10N
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
5M40ZM64C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 64; Package Code: TFBGA; Package Shape: SQUARE;
GAL22V10D-25QJN
GAL22V10D-25QJN by Lattice Semiconductor is a CMOS PLD with 25 ns propagation delay, 132 product terms, and 33.3 MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature range. Package: CHIP CARRIER, Surface Mount: YES, Outputs: 10.
5M570ZM100C5N
The Intel 5M570ZM100C5N is a programmable logic device (PLD) with 440 macro cells. It uses CMOS technology and has a max clock frequency of 118.3 MHz. This PLD is suitable for applications requiring in-system programmability and a wide range of I/O lines.
EPM7128AETC100-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
LC4256V-75TN176C
LC4256V-75TN176C by Lattice Semiconductor is a 3.3V EE PLD with 256 macro cells, 132 inputs, and 128 I/O lines. With a propagation delay of 7.5 ns and max clock frequency of 111 MHz, it's ideal for applications requiring fast processing speeds in programmable logic devices. The device is surface mountable and features JTAG boundary scan test capability for efficient testing processes.
ATF1502AS-10JU44
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
M4A5-32/32-10VNI48
M4A5-32/32-10VNI48 by Lattice Semiconductor is a 32 macrocell EE PLD with 34 inputs and 32 outputs. It operates at a max clock frequency of 62.5 MHz, making it suitable for industrial applications requiring fast processing speeds. With in-system programmability and JTAG boundary scan test capability, this PLD offers flexibility and ease of testing during development.
ATF16LV8C-10JU-T
ATF16LV8C-10JU-T by Microchip Technology is a 20-terminal PLD with 7 dedicated inputs and 8 I/O lines. It operates on a supply voltage range of 3V to 5.5V, has a propagation delay of 10ns, and can withstand temperatures from -40°C to 85°C. This programmable IC type is commonly used in industrial applications for its flash memory-based functionality.
EPM570ZM100C6N
The Intel EPM570ZM100C6N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 9.5 ns propagation delay. It uses CMOS technology and has a max supply voltage of 1.89 V. Ideal for applications requiring programmable logic devices with fast response times and high input/output capabilities in compact form factors.
M4A5-64/32-12VI48
Vantis
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
GAL22V10D-4LJN
GAL22V10D-4LJN by Lattice Semiconductor is a 5V CMOS PLD with 4ns propagation delay, 132 product terms, and 167MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature environments. It features 11 dedicated inputs, 10 I/O lines, and a square chip carrier package with J bend terminals.
EPM7128STC100-15N
EPM7128STC100-15N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 100 MHz. It features a propagation delay of 15 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XC9572XL-10VQG44C
Xilinx
The Xilinx XC9572XL-10VQG44C is a 3.3V programmable logic device with 72 macro cells and 34 I/O lines. It features a propagation delay of 10ns, operates at a max clock frequency of 100MHz, and supports in-system programmability. Ideal for applications requiring high-speed processing and flexibility in design configurations.
XC95144XL-10TQG144C
XC95144XL-10TQG144C by Xilinx is a 3.3V FLASH PLD with 117 I/O lines, 144 macro cells, and 138.88 MHz clock frequency. Ideal for applications requiring in-system programmability, it features a propagation delay of 10 ns and operates at temperatures from 0 to 70°C.
XC95144XL-10TQG100C
Xilinx XC95144XL-10TQG100C is a 144 macrocell CMOS PLD with 81 I/O lines, 138.88 MHz clock frequency, and 10 ns propagation delay. Ideal for applications requiring in-system programmability, such as flash-based designs needing fast processing speeds and versatile I/O configurations.
XC9536XL-10VQG44C
Xilinx XC9536XL-10VQG44C is a 36 macrocell FLASH PLD with 34 I/O lines, operating at max 138.88 MHz clock frequency and 10 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems.
XC9572XL-10TQG100C
XC9572XL-10TQG100C by Xilinx is a programmable logic device with 72 macro cells and CMOS technology. It has a max clock frequency of 100 MHz and can be used for in-system programming, making it suitable for various applications requiring high-speed processing and flexibility.
XC9572XL-10VQG64C
XC9572XL-10VQG64C by Xilinx is a 3.3V FLASH PLD with 72 macro cells, 36 inputs/outputs, and 100 MHz clock frequency. Ideal for applications requiring in-system programmability, it features a propagation delay of 10 ns and operates b/w -40 to +85°C.
XC95144XL-10TQG100I
The Xilinx XC95144XL-10TQG100I is a 144 macrocell FLASH PLD with 81 I/O lines. It operates at a max clock frequency of 138.88 MHz, has propagation delay of 10 ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
XC9536XL-10VQG44I
Xilinx XC9536XL-10VQG44I is a 36 macrocell FLASH PLD with 34 I/O lines, operating at max 138.88 MHz clock frequency. It features 10 ns propagation delay and supports in-system programmability. Ideal for industrial applications requiring high-speed logic processing within temperature range of -40 to 85°C.
XC9572XL-10VQG44I
Xilinx XC9572XL-10VQG44I is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 100MHz clock frequency. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and propagation delay of 10ns.
XC9572XL-10TQG100I
Xilinx XC9572XL-10TQG100I is a 3.3V CMOS PLD with 72 macro cells, 72 I/O lines, and 100 terminals. It offers a propagation delay of 10ns, operates at up to 100MHz clock frequency, and supports JTAG boundary scan testing. Ideal for industrial applications requiring in-system programmability and high-speed processing within the temperature range of -40°C to 85°C.
XC95288XL-10TQG144C
The Xilinx XC95288XL-10TQG144C is a FLASH PLD with 288 macro cells, 117 I/O lines, and 100 MHz clock frequency. It operates at a max supply voltage of 3.6V and has a propagation delay of 10ns. Ideal for applications requiring programmable logic devices in commercial temperature environments.
XC9572XL-10VQG64I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
XC9572XL-10TQ100I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
XC95288XL-10TQG144I
XC95288XL-10TQG144I by Xilinx is a PLD with 288 macro cells, 117 inputs/outputs, and 100 MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test support, and operates b/w -40 to 85°C.
XC9572XL-10VQ64I
Xilinx XC9572XL-10VQ64I is a 3.6V PLD with 72 macro cells, 36 inputs/outputs, and 100MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a compact form factor of 10x10mm, this CMOS technology-based device suits projects requiring high-speed processing and flexibility.
XC9572XL-7VQG44C
Xilinx XC9572XL-7VQG44C is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 125MHz clock frequency. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications equipment. Package: PLASTIC/EPOXY, Surface Mount: YES, Propagation Delay: 7.5ns.
XC9536XL-10VQ44C
The Xilinx XC9536XL-10VQ44C is a 36 macrocell FLASH PLD with 34 I/O lines, operating at a max clock frequency of 138.88 MHz. It features a propagation delay of 10 ns and can be used for applications requiring programmable logic devices in commercial-grade environments.
XC9572XL-7VQG44I
The Xilinx XC9572XL-7VQG44I is a 72 macrocell FLASH PLD with 34 I/O lines, operating at up to 125 MHz. It features a propagation delay of 7.5 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact form factor.
XC95144XL-10TQG144I
XC95144XL-10TQG144I by Xilinx is a PLD with 117 I/O lines, 144 macro cells, and 138.88 MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a compact form factor of 20x20 mm and low profile design, it operates b/w -40 to 85°C temperatures.
XC9536XL-10VQG64I
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved