Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Microchip's ATF1508ASVL-20AU100 is a 128 macrocell EE PLD with 20ns propagation delay and 83.3MHz max clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test, and operates b/w -40 to 85°C.
Median Price
$5.720
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$4.710
1k+ parts
$4.350
10k+ parts
$4.120
Mouser Electronics
$5.010
-
DigiKey
$5.013
Greenchips
$4.043
$3.851
$3.667
$3.310
Digiode
$5.434
Nova Conductors
$5.814
NAC Semi
$5.900
$5.350
$4.890
Vyrian
SIE Connect GmbH - GreenChips
ComSIT Distribution GmbH
VNN
Vigor
$4.290
Ampacity Inc.
$4.860
Corphita
$5.148
Corohmni
$5.179
Continental Prestige Electronics
$5.247
$5.142
Advanced Electronics
$5.334
$5.068
Component Stockers USA
$5.510
$4.830
Netroflash
$5.524
$5.407
Semicontronic
$10.580
$10.316
$10.263
Microchip USA
$16.016
Aztec Data Supply Inc.
$104.473
Fulton Briggs Corp.
Supply Digital
Perfect Parts
Argo Parts USA
This material provides durability and protection for the internal components of the PLD, ensuring a longer lifespan.
Fast propagation delay allows for quick signal processing and response times, making this PLD suitable for high-speed applications.
Surface mount capability makes the PLD easy to integrate into circuit boards, saving space and simplifying the manufacturing process.
With a high maximum supply voltage, this PLD can handle a wide range of power inputs, increasing its versatility.
The large number of macro cells provides ample resources for complex logic functions and designs.
The square shape makes the PLD easy to handle and install, reducing the likelihood of errors during assembly.
Having a consistent nominal supply voltage ensures stable and reliable performance of the PLD.
A high number of terminals allows for a wide range of connections and configurations, making the PLD versatile in different applications.
The ability to program the PLD in-system enables flexibility in design and easy updates without the need for physical modification.
High clock frequency capability allows the PLD to process signals quickly, making it suitable for demanding tasks that require fast response times.
Programmable Logic Devices (PLD) ATF1508ASVL-20AU100 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
ATF1508ASVL-20AU100 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Asi Semiconductor
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Zetex Plc
Semiconductors
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
GAL22V10D-4LJN
Lattice Semiconductor
GAL22V10D-4LJN by Lattice Semiconductor is a 5V CMOS PLD with 4ns propagation delay, 132 product terms, and 167MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature environments. It features 11 dedicated inputs, 10 I/O lines, and a square chip carrier package with J bend terminals.
5M1270ZT144A5N
Altera
The Altera 5M1270ZT144A5N is a programmable logic device with 980 macro cells. It has a propagation delay of 10 ns and uses CMOS technology. It is a flash PLD that is in-system programmable and has a maximum operating temperature of 105 °C. Its package style is flatpack with a surface mount option. The device is suitable for industrial applications and supports JTAG boundary scan testing.
EPM7064STC100-10N
Intel
EPM7064STC100-10N by Intel is a 64 macrocell EE PLD with 10 ns propagation delay and 125 MHz max clock frequency. It is used in applications requiring programmable logic devices for fast processing and high-speed data handling, featuring a square package shape, in-system programmability, and low profile flatpack style.
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
SLG46880VTR
Dialog Semiconductor
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Packing Method: BOX, TR, 13-INCH;
EPM570M100C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
EPM7032SLC44-7
The Altera EPM7032SLC44-7 is a 32 macrocell EE PLD with 36 I/O lines, operating at up to 166.7 MHz clock frequency. It features a propagation delay of 7.5 ns and can be in-system programmable for various applications requiring high-speed logic functions in commercial-grade environments.
XC95288XL-10FGG256C
Xilinx
The Xilinx XC95288XL-10FGG256C is a 288 macrocell FLASH PLD with 192 inputs/outputs, operating at up to 100 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring high-speed processing and flexibility in programmable logic design.
XC9572XL-7TQ100I
XC9572XL-7TQ100I by Xilinx is a 3.3V programmable IC with 72 macro cells and 72 inputs/outputs. With a propagation delay of 7.5ns, it operates at a max clock frequency of 125MHz. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
5M570ZT144C4N
The Intel 5M570ZT144C4N is a FLASH PLD with 440 macro cells, 114 I/O lines, and a max clock frequency of 184.1 MHz. It is ideal for applications requiring fast propagation delay of 9.5 ns, such as high-speed digital signal processing and communication systems. With in-system programmability and JTAG boundary scan test support, it offers flexibility and ease of integration in various electronic designs.
ATF16V8B-10JU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
PEEL18CV8P-15L
Anachip
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
EPF8452ALI84-4
EPF8452ALI84-4 by Intel is a PLD with 336 logic cells, 68 inputs, and 64 I/O lines. It operates at voltages of 3.3/5,5V and has a temperature range of -40 to 85°C. Ideal for industrial applications requiring high-performance programmable logic solutions in compact form factors.
ATF16V8CZ-15PU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
XC9536XL-10CSG48C
The Xilinx XC9536XL-10CSG48C is a 36 macrocell FLASH PLD with 10 ns propagation delay and 138.88 MHz max clock frequency. Ideal for applications requiring in-system programmability, it features 36 I/O lines, operates at temperatures from 0 to 70 °C, and has a package style of GRID ARRAY.
M4A5-64/32-10VNC
M4A5-64/32-10VNC by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs and 32 I/O lines. Featuring a propagation delay of 10 ns, it operates at a max clock frequency of 62.5 MHz. Ideal for applications requiring programmable logic devices with in-system programmability and JTAG boundary scan test capabilities.
EPM3032ATC44-10
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
EPM1270T144I5N
FLASH PLD; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE; Finishing Of Terminal Used: MATTE TIN;
M4A5-32/32-10VNC48
M4A5-32/32-10VNC48 by Lattice Semiconductor is a programmable logic device with 32 macro cells and 34 inputs. It has a max clock frequency of 62.5 MHz and can be used for applications requiring in-system programmability and PAL-type architecture.
PALCE22V10-10JCT
Cypress Semiconductor
PALCE22V10-10JCT by Cypress: 10 ns Propagation Delay, 5.25 V Max Supply Voltage, CMOS Tech. Ideal for FLASH PLD applications with 11 dedicated inputs and 10 I/O lines. Package style is CHIP CARRIER, suitable for surface mount with J BEND terminals at 1.27 mm pitch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF1504AS-10JU44
ATF1504AS-10JU44 by Microchip Technology is a programmable logic device (PLD) with 64 macro cells and 32 inputs/outputs. It has a max clock frequency of 125 MHz and can be used for in-system programming, making it suitable for industrial applications.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
ATF1508AS-10AU100
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
Microchip ATF1508AS-10AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 125 MHz clock frequency, has 10 ns propagation delay, and supports in-system programming. Ideal for industrial applications requiring fast processing and versatile I/O capabilities.
ATF1504AS-10AU44
Microchip Technology's ATF1504AS-10AU44 is a 5.5V PLD with 10ns propagation delay, 64 macro cells, and 32 inputs. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and operates at temperatures ranging from -40 to 85°C.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
ATF1508ASV-15AU100
Microchip's ATF1508ASV-15AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 3.3V, has a propagation delay of 15ns, and supports in-system programming. Ideal for industrial applications requiring high clock frequencies up to 100MHz.
ATF1504AS-10AU100
Microchip Technology's ATF1504AS-10AU100 is a 64 macro cell EE PLD with 64 inputs/outputs and 40 product terms. It operates at a max clock frequency of 125 MHz, with a propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF1504ASV-15AU44
ATF1508ASV-15AU100-T
Microchip Technology's ATF1508ASV-15AU100-T is a 3.3V EE PLD with 15ns propagation delay and 100 terminals. Ideal for industrial applications, it features a max clock frequency of 100MHz, 80 I/O lines, and operates b/w -40 to 85°C.
ATF1504ASVL-20AU44
Microchip Technology's ATF1504ASVL-20AU44 is a 3.3V EE PLD with 32 I/O lines and 20ns propagation delay. Ideal for industrial applications, it features a max clock frequency of 83.3MHz and operates b/w -40 to 85°C, making it suitable for various programmable logic tasks.
ATF1508ASL-25AU100
Microchip ATF1508ASL-25AU100 is a 128 macrocell EE PLD with 25ns propagation delay, in-system programmable, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed processing up to 33.3MHz, with a wide operating temperature range from -40°C to 85°C. Package style is flatpack, thin profile, fine pitch for compact designs.
ATF1504AS-10AU44-T
Microchip Technology's ATF1504AS-10AU44-T is a 32 I/O EE PLD with 10 ns propagation delay and 125 MHz clock frequency. Ideal for industrial applications, this PLD features a max supply voltage of 5.5 V and operates in temperatures ranging from -40 to 85 °C.
ATF1504AS-10JU84
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Microchip Technology's ATF1504AS-10JU84 is a 64 macrocell EE PLD with 32 inputs/outputs, 40 product terms, and 10ns propagation delay. Ideal for industrial applications, it operates b/w -40 to 85°C, supports JTAG boundary scan test, and has a max clock frequency of 125MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved