Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.
Add filters
All
Selected
TPS54226PWP
Texas Instruments
TPS54226PWP by Texas Instruments is a switching regulator with 20 terminals, operating b/w -40 to 85°C. It offers a max output voltage of 5.5V and current of 2A, suitable for industrial applications requiring pulse width modulation control at up to 700kHz frequency.
DUAL SWITCHING CONTROLLER
VOLTAGE-MODE
PULSE WIDTH MODULATION
18 V
4.5 V
12 V
R-PDSO-G20
e4
5 mm
2
1
20
85 Cel
-40 Cel
2 A
5.5 V
.76 V
PLASTIC/EPOXY
HTSSOP
TSSOP14,.25
RECTANGULAR
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
260
Not Qualified
1.2 mm
Switching Regulator or Controllers
YES
BUCK
700 kHz
INDUSTRIAL
NICKEL PALLADIUM GOLD
GULL WING
.65 mm
DUAL
30
4.4 mm
TPS54226RGTT
TPS54226RGTT by Texas Instruments is a 16-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85 °C. It offers a max output current of 2A, max output voltage of 5.5V, and a BUCK switcher configuration. Ideal for industrial applications requiring efficient power management in compact spaces.
S-PQCC-N16
3 mm
16
HVQCCN
LCC16,.12SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
Nickel/Palladium/Gold (Ni/Pd/Au)
NO LEAD
.5 mm
QUAD
NOT SPECIFIED
UCD9240PFCR
UCD9240PFCR by Texas Instruments is a switching controller with 80 terminals, operating b/w -40 to 125°C. It has a buck switcher config, PWM control technique, and max frequency of 2MHz. Ideal for automotive applications due to its thin profile and fine pitch package style.
SWITCHING CONTROLLER
3.6 V
3 V
3.3 V
S-PQFP-G80
12 mm
4
80
125 Cel
TFQFP
FLATPACK, THIN PROFILE, FINE PITCH
2000 kHz
AUTOMOTIVE
NCP1546DG
Onsemi
NCP1546DG by Onsemi is a switching regulator with 3A output current, 187kHz max frequency, and 14V nominal input voltage. It operates in buck configuration using pulse width modulation control technique. Ideal for applications requiring efficient voltage regulation in compact spaces.
ALSO OPERATES AS LDO REGULATOR
SWITCHING REGULATOR
CURRENT/VOLTAGE-MODE
40 V
14 V
R-PDSO-G8
e3
4.9 mm
8
70 Cel
0 Cel
3 A
SOP
SOP8,.25
SMALL OUTLINE
1.75 mm
187 kHz
COMMERCIAL
TIN
1.27 mm
3.9 mm
NCV8842DG
NCV8842DG by Onsemi is a switching regulator with 3A output current, 187kHz max frequency, and 40V input voltage. Ideal for automotive applications due to its -40 to 125 °C operating temp range and pulse width modulation control technique. Package style is small outline with gull wing terminals.
5 V
NCV8843DG
NCV8843DG by Onsemi is a switching regulator with 8 terminals, operating at -40 to 125 °C. It has a max output current of 3A and supports PWM control technique. Ideal for automotive applications due to its compact size and wide input voltage range of 4.5-40V.
374 kHz
NCV8843DR2G
NCV8843DR2G by Onsemi is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 3A and supports input voltages from 4.5V to 40V. Ideal for automotive applications, it utilizes pulse width modulation control at a frequency of up to 374 kHz.
NCP1082DEG
NCP1082° by Onsemi is a switching controller with current-mode control technique, operating at -40 to 85 °C. It has a max input voltage of 57V and nominal output voltage of 9V, suitable for industrial applications requiring high-frequency operation up to 500 kHz. The small outline package with gull wing terminals makes it ideal for space-constrained designs.
CURRENT-MODE
57 V
0 V
1.4 V
6.5 mm
9 V
TSSOP20,.25
1.1 mm
SINGLE
500 kHz
MATTE TIN
NCP5810DMUTXG
NCP5810DMUTXG by Onsemi is a current-mode switching regulator with 12 terminals, operating b/w -40 to 85 °C. It features a max switching frequency of 1900 kHz and supports pulse width modulation control technique. Ideal for industrial applications requiring a nominal input voltage of 3.7V and output voltage of 4.6V in a compact chip carrier package style.
4.6 V
2.7 V
3.7 V
S-XDSO-N12
12
UNSPECIFIED
HVSON
SOLCC12,.12,20
.55 mm
1900 kHz
TPS65136RTERG4
TPS65136RTERG4 by Texas Instruments is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 85°C. It features a max output current of 1.12A, PWM control technique, and BUCK-BOOST switcher configuration. Ideal for industrial applications requiring a compact chip carrier package with very thin profile and surface mount capability.
ALSO OPERATES IN PFM CONTROL TECHNIQUE
2.3 V
-2.5 V
1.12 A
.8 mm
BUCK-BOOST
1000 kHz
AL3158FSG-7
Diodes Incorporated
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
SWITCHED CAPACITOR CONVERTER
S-XQCC-N20
.27 A
.63 mm
1200 kHz
.4 mm
AL3159FSG-7
NCP3155ADR2G
NCP3155ADR2G by Onsemi is a voltage-mode switching regulator with 3A output current, 600kHz max switching frequency, and -40 to 125 °C operating temp. Ideal for automotive applications due to its small outline package and buck switcher configuration.
24 V
4.7 V
S-PDSO-G8
3
600 kHz
NCP3155BDR2G
NCP3155BDR2G by Onsemi is a voltage-mode switching regulator with 3A output current, operating at -40 to 125 °C. Ideal for automotive applications, it supports input voltages from 4.7V to 24V and has a max switching frequency of 1180kHz. The compact package style (SOP-8) makes it suitable for space-constrained designs.
1180 kHz
SC34063ADR2G
SC34063ADR2G by Onsemi is a switching regulator with 1.5A output current, 100kHz max switching frequency, and BUCK-BOOST configuration. It operates b/w 3V to 40V input voltage range and is ideal for commercial applications requiring efficient power management in compact spaces.
1.5 A
100 kHz
TPS53315RGFT
TPS53315RGFT by Texas Instruments is a 40-terminal switching regulator with a max output current of 12A and a max switching frequency of 1000kHz. It operates in industrial temperature grades, suitable for applications requiring efficient buck converter control using pulse width modulation technique.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V
15 V
R-PQCC-N40
7 mm
40
12 A
.6 V
UCD9244RGCR
UCD9244RGCR by Texas Instruments is a 64-terminal switching controller with a max operating temperature of 125°C. It features a single switcher config, PWM control technique, and 4 outputs at 3.3V ideal for automotive applications requiring high-frequency operation up to 2000 kHz.
S-PQCC-N64
9 mm
64
TPS59124RGER
TPS59124RGER by Texas Instruments is a 10A BUCK switching controller with 85°C max temp, PWM control technique, and 420kHz max frequency. Ideal for industrial applications requiring a 5V nominal input voltage and 0.76V min output voltage in a compact chip carrier package.
S-PQCC-N24
4 mm
24
10 A
CHIP CARRIER
420 kHz
UCC2804DR81221G4
UCC2804DR81221G4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management in compact designs. The small outline package with gull wing terminals enables surface mount assembly, ideal for space-constrained environments.
10 V
1 A
BICMOS
NCP3101CMNTXG
NCP3101CMNTXG by Onsemi is a 40-terminal switching regulator with voltage-mode control, operating b/w -40 to 125 °C. Ideal for automotive applications, it features a buck switcher configuration, PWM control technique, and max switching frequency of 317 kHz.
ALSO OPERATES IN ADJUSTABLE MODE DOWN TO 0.8 V
13.2 V
S-XQCC-N40
6 mm
LCC40,.24SQ,20
317 kHz
TPS65708YZHT
TPS65708YZHT by Texas Instruments is a switching controller with 16 terminals in a square grid array package. It operates b/w -40 to 85°C, outputs 1.2-3.3V, and supports PWM control technique at up to 2250kHz frequency. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
6 V
.8 V
S-XBGA-B16
e1
2.036 mm
.4 A
1.2 V
VFBGA
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.625 mm
2250 kHz
Tin/Silver/Copper (Sn/Ag/Cu)
BALL
BOTTOM
TPS84620RUQT
TPS84620RUQT by Texas Instruments is a 6A BUCK switching regulator with 1.2-5.5V output range, ideal for industrial applications. Features include 560kHz max switching frequency, -40 to 85°C operating temp, and 47 terminals in a square chip carrier package.
14.5 V
S-PQCC-N47
15 mm
47
6 A
1.8 V
QCCN
LCC47(UNSPEC)
245
2.9 mm
560 kHz
.9 mm
NCP3122MNTXG
NCP3122MNTXG by Onsemi is a 32-terminal switching regulator with voltage-mode control, operating b/w -40 to 125 °C. With a max output current of 3.8A and a switching frequency of 2530 kHz, it's ideal for automotive applications requiring pulse width modulation in a compact chip carrier package.
S-XQCC-N32
32
3.8 A
LCC32,.2SQ,20
PHASE-SHIFT
2530 kHz
NCP3123MNTXG
NCP3123MNTXG by Onsemi is a 32-terminal SQUARE CHIP CARRIER with VOLTAGE-MODE control, operating b/w -40 to 125 °C. It supports up to 4.8A output current at 2530 kHz switching frequency, ideal for automotive applications requiring high efficiency and precise voltage regulation.
4.8 A
NCP5381AMNR2G
NCP5381AMNR2G by Onsemi is a 40-terminal switching controller with PWM control technique, push-pull switcher config, and max switching frequency of 1000 kHz. It operates b/w 10.8-13.2V input voltage range and is ideal for applications requiring efficient power regulation in compact spaces.
10.8 V
PUSH-PULL
OTHER
NCP5389MNR2G
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
GRID ARRAY
NCP5385MNR2G
NCP5385MNR2G by Onsemi is a 40-terminal switching controller with PWM control technique, push-pull switcher config, and max switching frequency of 1MHz. It operates b/w 0-70 °C, ideal for commercial applications requiring a nominal output voltage of 3.3V from an input range of 10.8-13.2V.
LM2574N-005G
LM2574N-005G by Onsemi is a VOLTAGE-MODE Switching Regulator with 0.5A output current and 63 kHz max switching frequency. It has 8 terminals, PLASTIC/EPOXY body, and RECTANGULAR shape. Ideal for power management applications requiring efficient voltage regulation in compact designs.
R-PDIP-T8
.5 A
DIP
DIP8,.3
IN-LINE
NO
63 kHz
THROUGH-HOLE
2.54 mm
NCP1595MNT2G
NCP1595MNT2G by Onsemi is a current-mode switching regulator with 6.1A output current, 1130kHz max switching frequency, and 1.2V nominal output voltage. Ideal for industrial applications requiring efficient power management in a compact square package with surface mount capability.
4 V
S-PDSO-N6
6
6.1 A
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
1130 kHz
.95 mm
NCP1595AMNTWG
NCP1595AMNTWG by Onsemi is a current-mode switching regulator with 6.1A output, 1130kHz frequency, and 1.2V nominal voltage. It operates b/w -40 to 85°C, suitable for industrial applications requiring efficient power management in a compact form factor. The IC's pulse width modulation control technique and buck switcher configuration make it ideal for various electronic devices needing stable power supply solutions.
SOLCC6,.11,37
IR2156STR
International Rectifier
IR2156STR by International Rectifier is a 14V switching regulator with 14 terminals in a small outline package. It features Gull Wing terminals, tin lead finish, and is surface mountable. Ideal for applications requiring precise power control in compact electronic devices.
R-PDSO-G14
e0
14
SOP14,.25
TIN LEAD
TEA1623P/N1,112
NXP Semiconductors
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
8 V
8.5 V
9.5 mm
-20 Cel
4.2 mm
200 kHz
7.62 mm
TEA1622P/N1,112
TEA1620P/N1,112
.25 A
TEA1610T/N5,518
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RESONANT CONTROL
13 V
R-PDSO-G16
9.9 mm
-25 Cel
LSOP
SMALL OUTLINE, LOW PROFILE
1.65 mm
550 kHz
TEA1532T/N1,118
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
9.4 V
75 kHz
PIP250M,518
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 68; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
3.98 V
S-PQCC-N68
10 mm
68
200 A
VQCCN
CHIP CARRIER, VERY THIN PROFILE
350 kHz
PIP212-12M,518
SWITCHING REGULATOR; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; JESD-30 Code: S-PQCC-N56;
S-PQCC-N56
8 mm
56
60 A
SILVER
PIP202-12M-2,518
SWITCHING REGULATOR; No. of Terminals: 68; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
7 V
PIP201-12M-3,518
SWITCHING REGULATOR; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Maximum Input Voltage: 14 V;
TEA1507P/N1,112
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
205 kHz
BCDMOS
TEA1520P/N2,112
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TEA1520T/N2,518
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
8.65 mm
TEA1521P/N2,112
TEA1522P/N2,112
TEA1523P/N2,112
TEA1532AP/N1,112
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Input Voltage: 15 V;
TEA1532AT/N1,118
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Control Technique: PULSE WIDTH MODULATION;
© 2023 All rights reserved
