Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MAX5033BUSA
Maxim Integrated
MAX5033BUSA by Maxim Integrated is a voltage-mode switching regulator with a max output current of 2.1 A and a max switching frequency of 135 kHz. It is commonly used in applications requiring efficient power conversion, such as automotive electronics and industrial control systems.
PFM CONTROL TECHNIQUE ALSO POSSIBLE
SWITCHING REGULATOR
VOLTAGE-MODE
PULSE WIDTH MODULATION
76 V
7.5 V
12 V
R-PDSO-G8
e0
4.9 mm
1
8
85 Cel
0 Cel
2.1 A
5 V
PLASTIC/EPOXY
SOP
SOP8,.25
RECTANGULAR
SMALL OUTLINE
245
Not Qualified
1.75 mm
Switching Regulator or Controllers
YES
BUCK
135 kHz
BICMOS
OTHER
TIN LEAD
GULL WING
1.27 mm
DUAL
3.9 mm
MAX5033DUPA
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.25 TO 13.2V; PFM CONTROL TECHNIQUE ALSO POSSIBLE
R-PDIP-T8
9.375 mm
DIP
DIP8,.3
IN-LINE
4.572 mm
NO
THROUGH-HOLE
2.54 mm
7.62 mm
MAX5033DUSA
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX5035AUPA
MAX5035AUPA by Maxim Integrated is a BUCK switching regulator with 2.5A output current, 135 kHz switching frequency, and 3.3V nominal output voltage. It operates b/w 7.5V to 76V input range and uses pulse width modulation control technique for various applications requiring efficient power management in compact designs.
ALSO HAS A CONTROL TECHNIQUE OF PFM
2.5 A
3.3 V
MAX5035BUSA
MAX5035BUSA by Maxim Integrated is a voltage-mode switching regulator with 2.5A output current, 135kHz max switching frequency, and BUCK switcher config. Ideal for applications requiring a small outline package, such as power supplies in industrial equipment or automotive electronics.
MAX5035CUPA
MAX5035CUPA by Maxim Integrated is a BICMOS switching regulator with 2.5A output current, 135 kHz switching frequency, and 12V nominal output voltage. It operates b/w 0-85°C and is ideal for applications requiring voltage-mode control in a compact IN-LINE package.
15 V
24 V
MAX5035DUSA
MAX5035DUSA by Maxim Integrated is a voltage-mode switching regulator with 2.5A output current, BUCK switcher config, and 135kHz max switching frequency. Ideal for applications requiring efficient power conversion in a compact form factor.
ALSO HAS A CONTROL TECHNIQUE OF PFM, OPERATES IN ADJUSTABLE MODE FROM 1.25 TO 13.2V
NCP1201P100
Onsemi
NCP1201P100 by Onsemi is a current-mode switching controller with a max operating temp of 125°C. It features a single switcher config, PWM control technique, and operates at a max frequency of 117 kHz. Ideal for applications requiring efficient power regulation in various electronic devices.
SWITCHING CONTROLLER
CURRENT-MODE
11 V
9.78 mm
125 Cel
-25 Cel
235
4.45 mm
SINGLE
117 kHz
CMOS
LNBP11LPUR
STMicroelectronics
LNBP11LPUR by STMicroelectronics is a compact switching regulator with a nominal input voltage of 16V and output current up to 0.85A. It operates in temperatures from 0 °C to 125 °C, featuring a max switching frequency of 24kHz. Ideal for power supply applications in space-constrained designs.
25 V
16 V
R-PDSO-N8
6 mm
.85 A
19 V
HVSON
SOLCC8,.25
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
NOT SPECIFIED
16,23
1 mm
Power Management Circuits
6.3 mA
24 kHz
BIPOLAR
NO LEAD
5 mm
MC44604PG
MC44604PG by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 16 terminals, operating b/w -25 to 85 °C. It has a max output current of 0.75 A and operates at a frequency of 250 kHz. Ideal for applications requiring efficient power regulation in compact spaces.
ALSO OPERATES IN CURRENT MODE
10 V
R-PDIP-T16
e3
19.175 mm
16
.75 A
DIP16,.3
260
4.44 mm
250 kHz
TIN
FSDM0565RWDTU
Fairchild Semiconductor
FSDM0565RWDTU by Fairchild Semiconductor is a switching regulator with 6 terminals, operating temperature range of -25 to 85°C, and max output current of 11A. It utilizes BCDMOS technology for pulse width modulation control at a max frequency of 72 kHz. Ideal for applications requiring single switcher configuration and nominal input voltage b/w 9-18V.
18 V
9 V
14 V
R-PZFM-T6
6
11 A
ZIP
ZIP6,.12,.11,85/68/50TB
FLANGE MOUNT
72 kHz
BCDMOS
MATTE TIN
ZIG-ZAG
TSM006IDT
TSM006IDT by STMicroelectronics is a compact switching regulator with a max input voltage of 20V and output current of 0.2A. It operates in current-mode control, featuring a max switching frequency of 73kHz. Ideal for efficient power management in various electronic applications.
20 V
8 V
R-PDSO-G14
e4
8.65 mm
14
105 Cel
.2 A
SOP14,.25
73 kHz
NICKEL PALLADIUM GOLD
MC34262DG
MC34262DG by Onsemi is a switching regulator with 12V nominal voltage, 0-85 °C operating temperature range, and 0.5A max output current. It is used in power factor control applications due to its current-mode control technique and boost switcher configuration.
POWER FACTOR CONTROLLER
28 V
.5 A
12
20 mA
BOOST
30
NCP1501DMR2G
NCP1501DMR2G by Onsemi is a current-mode switching regulator with a max operating temperature of 85 °C. It operates in buck configuration with a max switching frequency of 1000 kHz, suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, making it ideal for surface mount designs where space is limited.
5.2 V
2.7 V
3.6 V
S-PDSO-G8
3 mm
-30 Cel
TSSOP
TSSOP8,.19
SQUARE
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
1000 kHz
.65 mm
UC2843ADR2G
UC2843ADR2G by Onsemi is a current-mode switching controller with a max output current of 1A and a max switching frequency of 500kHz. It operates b/w -25 °C to 85°C, making it suitable for various applications requiring pulse width modulation control technique in small outline packages.
30 V
8.2 V
1 A
500 kHz
TSM007IDT
TSM007IDT by STMicroelectronics is a compact switching regulator with a max operating temp of 95 °C and supports input voltages from 12V to 25V. It features an 8-terminal design, operates at up to 500 kHz, and utilizes PWM control. Ideal for efficient power management in various electronic applications.
95 Cel
TSM007ID
TSM007ID by STMicroelectronics is a compact switching regulator with a max operating temp of 95 °C and supports input voltages from 12V to 25V. It features an 8-terminal design, operates at up to 500 kHz, and utilizes PWM control for efficient power management in various applications. Ideal for space-constrained designs, it ensures reliable performance in electronic devices.
TSM007IN
TSM007IN by STMicroelectronics is a current-mode switching regulator with a max input voltage of 25V and operates at up to 500kHz. It features an 8-terminal, in-line design with a compact size of 7.62mm width. Ideal for efficient power management in various electronic applications.
4.8 mm
ICL7660ISA-T
SWITCHED CAPACITOR CONVERTER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHED CAPACITOR CONVERTER
1.5 V
-20 Cel
.02 A
Other Analog ICs
.175 mA
DOUBLER INVERTER
10 kHz
MAX1980EGP-T
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
ALSO REQUIRES A SUPPLY OF 4V TO 28V
5.5 V
4.5 V
S-PQCC-N20
20
VQCCN
LCC20,.20SQ,25
CHIP CARRIER, VERY THIN PROFILE
PUSH-PULL
550 kHz
QUAD
MAX5033DUSA-T
MAX5035BUSA-T
MAX5035BUSA-T by Maxim Integrated is a switching regulator with a max output current of 2.5A and a max input voltage of 76V. It is commonly used in applications requiring voltage-mode control and pulse width modulation techniques, such as power supplies and battery chargers.
MAX5035DUSA-T
MAX5035DUSA-T by Maxim Integrated is a VOLTAGE-MODE BUCK SWITCHING REGULATOR with 2.5A output current, 135 kHz switching frequency, and 12V nominal input voltage. It is ideal for applications requiring efficient power conversion in compact spaces due to its small outline package and dual terminal position.
MAX853ISA-T
SWITCHED CAPACITOR REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM -0.5V TO 9V
SWITCHED CAPACITOR REGULATOR
.005 A
-4.1 V
120 kHz
MAX860ISA-T
MAX860ISA-T by Maxim Integrated is a small outline switched capacitor converter with 8 terminals. It operates b/w -25°C to 85°C, accepting input voltage from 1.5V to 5.5V and delivering up to 0.06A output current at a max frequency of 130kHz. Ideal for applications requiring efficient power conversion in compact spaces.
.06 A
130 kHz
MAX861IUA-T
SWITCHED CAPACITOR CONVERTER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
MC33364DR2G
MC33364DR2G by Onsemi is a switching controller with max output current of 0.005A and max input voltage of 20V. It operates in current-mode control technique at a max switching frequency of 800kHz. This small outline package is ideal for applications requiring efficient power regulation in compact spaces.
15.5 V
9.9 mm
3
SOP14/16,.25
800 kHz
Matte Tin (Sn) - annealed
40
MC34262PG
MC34262PG by Onsemi is a switching regulator with 12V nominal voltage, 0.5A max output current, and boost switcher config. It operates in a temperature range of 0-85 °C and is ideal for power factor control applications.
9.27 mm
5.33 mm
MC44608P40G
MC44608P40G by Onsemi is a voltage-mode switching controller with 44 kHz max frequency. It operates b/w -25 to 85 °C and supports input voltages from 3.6V to 13V. Ideal for applications requiring pulse width modulation control technique in a single switcher configuration.
13 V
44 kHz
NCP1205PG
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ALSO HAS RESONANT CONTROL TECHNIQUE
125 kHz
MC34262DR2G
MC34262DR2G by Onsemi is a switching regulator with 12V nominal voltage, 0-85 °C operating temperature range, and 0.5A max output current. It is ideal for power factor control applications due to its current-mode control technique and boost switcher configuration. The small outline package with gull wing terminals makes it suitable for compact designs.
NCP1212PG
NCP1212PG by Onsemi is a switching controller with current-mode control technique. It operates b/w -25 to 105°C, with input voltage range of 10-25V and output current up to 1A at 200 kHz frequency. Ideal for applications requiring efficient power regulation in compact spaces.
200 kHz
MC33368PG
MC33368PG by Onsemi is a switching regulator with current-mode control and PWM technique. It operates b/w -25 to 125 °C, suitable for power factor correction applications. With a max output current of 0.01 A, it has 16 terminals in an inline package style.
14.5 V
.01 A
UC2842ANG
UC2842ANG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w -25 to 85 °C, ideal for regulating power in various applications like industrial automation and consumer electronics.
UC2844NG
NCP1530DM30R2G
NCP1530DM30R2G by Onsemi is a current-mode switching regulator with max output current of 0.6A and max switching frequency of 720kHz. Ideal for applications requiring pulse width modulation control technique, such as small outline, thin profile designs in electronics.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
4 V
.6 A
720 kHz
UC2843ANG
AP1538SDPG-13
Diodes Incorporated
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8-18V
3 A
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
1.63 mm
400 kHz
ICE3BR1765J
Infineon Technologies
9.8 V
9.385 mm
DIP7/8,.3
73.5 kHz
UC2845NG
UC2845NG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w -25 to 85°C, ideal for regulating power in various applications like industrial automation and consumer electronics.
ADP3166JRUZ-REEL
Analog Devices
ADP3166JRUZ-REEL by Analog Devices is a VOLTAGE-MODE SWITCHING CONTROLLER with 28 terminals in a SMALL OUTLINE package. It operates b/w 0-85 °C, supports input voltage range of 6.2-14V, and has a max output current of 0.00006A. Ideal for applications requiring high switching frequency up to 4000 kHz like power supplies and voltage regulators.
6.2 V
R-PDSO-G28
9.7 mm
28
.00006 A
TSSOP28,.25
1.2 mm
PHASE-SHIFT
4000 kHz
4.4 mm
ICE2A765I
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
21 V
8.5 V
7 A
ZIP6,.2,.1,100/50TB
107 kHz
ICE2B765I
NCP1239VDR2
NCP1239VDR2 by Onsemi is a current-mode switching controller with max output current of 0.8A and max switching frequency of 250kHz. It operates b/w -40 to 125 °C, suitable for various applications requiring efficient power regulation in compact spaces.
36 V
12.2 V
R-PDSO-G16
.8 A
SOP16,.25
TL5001CP-P
Texas Instruments
40 V
6 V
9.81 mm
.1 A
5.08 mm
TPS51727RHAT
TPS51727RHAT by Texas Instruments is a 40-terminal switching regulator with a 5V nominal voltage and 20A max output current. It operates in voltage-mode control technique, suitable for applications requiring high power supplies and precise voltage regulation. With a compact square package style and pulse width modulation, it offers efficient performance in various electronic devices.
DUAL SWITCHING CONTROLLER
S-PQCC-N40
2
100 Cel
-10 Cel
20 A
1.25 V
.4 V
HVQCCN
LCC40,.24SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
5
.5 mm
UCC3585MTRG4
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
6.3 V
3 V
SSOP
SSOP16,.25
SMALL OUTLINE, SHRINK PITCH
.635 mm
TL1453CPWRG4
TL1453CPWRG4 by Texas Instruments is a switching controller with 2 functions, operating b/w -20 to 85°C. It has a max output current of 0.021A and supports a switching frequency up to 500kHz. Ideal for applications requiring voltage-mode control in compact spaces.
.021 A
TSSOP16,.25
© 2023 All rights reserved
