Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NCP1076P130G
Onsemi
NCP1076P130G by Onsemi is a switching controller with current-mode control. It operates b/w -40 to 125 °C and has a max switching frequency of 130 kHz. With automotive temperature grade, it's ideal for power management applications in vehicles.
SWITCHING CONTROLLER
CURRENT-MODE
8 V
R-PDIP-T7
e3
9.59 mm
1
7
125 Cel
-40 Cel
PLASTIC/EPOXY
DIP
DIP7/8,.3
RECTANGULAR
IN-LINE
Not Qualified
5.33 mm
Switching Regulator or Controllers
NO
130 kHz
AUTOMOTIVE
MATTE TIN
THROUGH-HOLE
2.54 mm
DUAL
7.62 mm
NCP1076STCT3G
NCP1076STCT3G by Onsemi is a small outline switching controller with current-mode control. It operates b/w -40 to 125 °C, ideal for automotive applications. With a max switching frequency of 130 kHz and nominal input voltage of 8V, it offers efficient power management in compact designs.
R-PDSO-G4
6.5 mm
4
SOP
SOT-223
SMALL OUTLINE
260
1.75 mm
YES
GULL WING
2.3 mm
30
3.5 mm
NCP1077P130G
NCP1077P130G by Onsemi is a switching controller with current-mode control, operating at -40 to 125°C. It has a max switching frequency of 130 kHz and nominal input voltage of 8V. This rectangular package with 7 terminals is ideal for automotive applications requiring efficient power regulation.
NCP1219BD100R2G
NCP1219BD100R2G by Onsemi is a current-mode switching regulator with max. switching frequency of 107 kHz. It features small outline package style, matte tin terminal finish, and dual terminal position. Ideal for applications requiring efficient power management in compact electronic devices.
SWITCHING REGULATOR
R-PDSO-G7
SOP7/8,.25
107 kHz
1.27 mm
LM2575HVT-12/LB03
Texas Instruments
Texas Instruments' LM2575HVT-12/LB03 is a 5-terminal switching regulator with a max output voltage of 57V and max output current of 1A. Operating b/w -40°C to 125°C, it uses pulse width modulation control technique in automotive applications for regulating voltages efficiently up to 12V.
CAN ALSO CONFIGURED AS BUCK BOOST REGULATOR
VOLTAGE-MODE
PULSE WIDTH MODULATION
60 V
4 V
25 V
R-XZFM-T5
e0
5
1 A
57 V
3.3 V
12 V
UNSPECIFIED
ZFM
FLANGE MOUNT
BUCK
63 kHz
Tin/Lead (Sn/Pb)
ZIG-ZAG
40
LM2575HVT-ADJ/LB03
LM2575HVT-ADJ/LB03 by Texas Instruments is a switching regulator with max output voltage of 57V, 1A current, and PWM control mode. Ideal for automotive applications due to its -40 to 125°C temp range, it operates at a max frequency of 63kHz and supports input voltages from 4V to 60V.
VOUT RANGE=(1.23-37 VOLT)
NCP3012DTBR2G
NCP3012DTBR2G by Onsemi is a voltage-mode switching controller with a min output voltage of 0.8V and max operating temperature of 125°C. Ideal for automotive applications, it has a single switcher configuration, operates at a max frequency of 88kHz, and supports input voltages ranging from 4.7V to 28V.
28 V
4.7 V
R-PDSO-G14
e4
5 mm
3
14
.13 A
.8 V
TSSOP
TSSOP14,.25
1.2 mm
.012 mA
SINGLE
88 kHz
MOS
NICKEL PALLADIUM GOLD
.65 mm
4.4 mm
NCP3030ADR2G
NCP3030ADR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 8 terminals, operating from -40 to 125 °C. It has a max switching frequency of 1440 kHz and is ideal for automotive applications due to its small size and push-pull switcher configuration.
R-PDSO-G8
4.9 mm
8
SOP8,.25
PUSH-PULL
1440 kHz
3.9 mm
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
18 V
4.5 V
85 Cel
3 A
550 kHz
CMOS
INDUSTRIAL
NCP3170BDR2G
NCP3170BDR2G by Onsemi is a current-mode switching regulator with a max output current of 3A and a max switching frequency of 1100 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. With its buck switcher configuration and pulse width modulation control technique, this small outline IC is ideal for systems needing stable 3.3V output voltage from input sources ranging b/w 4.5V to 18V.
1100 kHz
NCV8881PWR2G
NCV8881PWR2G by Onsemi is a switching regulator with 16 terminals, VOLTAGE-MODE control mode, and BUCK switcher config. It operates at a max frequency of 600 kHz and supports a max output current of 3 A. Ideal for applications requiring efficient power conversion in compact spaces.
19 V
9 V
13.2 V
R-PDSO-G16
10.3 mm
16
HSOP
SOP16,.4
13.2
2.65 mm
Power Management Circuits
5 mA
600 kHz
7.5 mm
NCV3163MNR2G
NCV3163MNR2G by Onsemi is a voltage-mode switching regulator with a max output current of 3.4A and a max switching frequency of 300kHz. Ideal for automotive applications, it operates b/w -40 to 125 °C temperatures and supports input voltages ranging from 2.5V to 40V.
40 V
2.5 V
15 V
R-XDSO-N18
6 mm
18
3.4 A
HVSON
SOLCC18,.2,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
BUCK-BOOST
300 kHz
NO LEAD
.5 mm
NCV8851DBG
NCV8851DBG by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range from -40 to 125 °C, suitable for various automotive applications. With a max output current of 0.12A and a peak switching frequency of 575kHz, it offers efficient power management in a small outline package.
20 V
R-PDSO-G20
20
.12 A
6 V
TSSOP20,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
575 kHz
UCC2895QDWRQ1
UCC2895QDWRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 5V output voltage. It operates in automotive-grade temperatures from -40 to 125°C, featuring a max switching frequency of 1000 kHz. With AEC-Q100 screening, it's ideal for automotive applications requiring high efficiency and precise current-mode control.
PEAK/AVERAGE CURRENT MODE ALSO POSSIBLE
16.5 V
12.8 mm
2
.02 A
5.06 V
4.94 V
5 V
SOP20,.4
AEC-Q100
6 mA
10 V
PHASE-SHIFT
1000 kHz
BICMOS
ICE2QR1765
Infineon Technologies
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Switching Frequency: 65 kHz;
PWM CONTROL TECHNIQUE ALSO POSSIBLE
RESONANT CONTROL
26 V
11.2 V
R-PDIP-T8
9.385 mm
DIP8,.3
4.8 mm
65 kHz
ICE2QR4780Z
SWITCHING CONTROLLER; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Control Mode: CURRENT-MODE;
9.52 mm
NOT SPECIFIED
4.37 mm
AP1530SDPG-13
Diodes Incorporated
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 18V
3.6 V
-20 Cel
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
1.63 mm
360 kHz
OTHER
AP1530SG-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1512-12K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
30 V
R-PSSO-G5
10.16 mm
5.5 A
SMSIP5H,.6,67TB
4.85 mm
60 kHz
1.71 mm
9.15 mm
AP1512-12K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.71 mm;
AP1512-33K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SMSIP5H,.6,67TB;
AP1512-33K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 5.5 A;
AP1512-50K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
AP1512-50K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Control Mode: VOLTAGE-MODE;
AP1512A-12K5L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 6 A;
6 A
AP1512A-12K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Input Voltage: 30 V;
AP1512A-33K5L-13
AP1512A-33K5L-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 10.16 mm;
AP1512A-50K5L-13
AP1512A-50K5L-U
UCC28221DG4
UCC28221DG4 by Texas Instruments is a current-mode dual switching controller with BICMOS technology. It operates at 2000 kHz max switching frequency, suitable for industrial applications. With a 12V nominal input/output voltage range and compact design (9.9mm x 3.9mm), it's ideal for small outline surface-mount designs.
DUAL SWITCHING CONTROLLER
14.5 V
9.9 mm
105 Cel
.01 A
3.45 V
3.15 V
SOP16,.25
8.4 V
2000 kHz
AP1501-12K5G-13
Diodes Inc. AP1501-12K5G-13 is a 5-terminal switching regulator with VOLTAGE-MODE control, BUCK switcher config, and 6.5A max output current. Ideal for applications requiring a 12V nominal output voltage, such as power supplies in industrial equipment or automotive electronics. Operates b/w -20 to 85°C with a compact design (10.16mm x 9.15mm x 4.85mm).
24 V
6.5 A
TO-263
173 kHz
BIPOLAR
1.7 mm
AP1501-33K5G-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
AP1501-50K5G-U
AP1501-K5G-U
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.23 TO 37V
AP1501A-12K5G-U
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
7.5 A
AP1501A-33K5G-13
AP1501A-50K5G-13
Diodes Inc. AP1501A-50K5G-13 is a 5-terminal switching regulator with max output current of 7.5A and max input voltage of 40V. It operates in temp range -20 to 85°C, ideal for voltage-mode control applications requiring high efficiency and compact design in various electronic devices.
AP1501A-50K5G-U
AP1501A-50K5G-U by Diodes Inc. is a switching regulator with a max output current of 7.5 A and a max input voltage of 40 V. It operates using pulse width modulation control technique and is commonly used in applications requiring voltage regulation, such as power supplies and battery chargers.
AP1501A-K5G-U
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.23V TO 37V
FSQ510M
Fairchild Semiconductor
FSQ510M by Fairchild Semiconductor is a switching regulator with a max output current of 0.36A and a max switching frequency of 100kHz. It is commonly used in industrial applications for controlling current using pulse width modulation (PWM) technique.
7.4 V
11 V
9.2 mm
.36 A
SOP(UNSPEC)
250
3.7 mm
100 kHz
6.4 mm
NCP1338DR2G
NCP1338DR2G by Onsemi is a switching controller with max output current of 1A and max switching frequency of 130kHz. It operates in automotive grade temperature range (-40 to 125 °C) and uses pulse width modulation for control. Ideal for applications requiring efficient power management in compact spaces.
18.6 V
L6599AN
STMicroelectronics
L6599AN by STMicroelectronics is a resonant control switching regulator with a nominal voltage of 15 V and a max input voltage of 16 V. It features a compact rectangular package (20x7.62 mm) with 16 terminals for efficient power management. Ideal for applications requiring reliable power supplies, it operates at low current (5 mA).
LG-MAX
16 V
8.85 V
R-PDIP-T16
20 mm
DIP16,.3
15
5.1 mm
VIPER28LDTR
VIPER28LDTR by STMicroelectronics is a compact switching regulator with a max output current of 0.85 A and operates at a frequency of 66 kHz. It features a dual terminal design in a small outline package, ideal for space-constrained applications. This device supports input voltages from 8.5 V to 23.5 V, making it versatile for various power management needs.
23.5 V
8.5 V
14 V
.85 A
66 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
VIPER28LE
VIPER28LE by STMicroelectronics is a current-mode switching controller with a max output current of 0.85 A and operates at up to 66 kHz. It supports input voltages from 8.5 V to 23.5 V, making it ideal for power supply applications. Its compact design features a rectangular package with 10 terminals for easy integration.
R-XDIP-T10
10
SDIP
SDIP10,.3
1.778 mm
L5962TR
L5962TR by STMicroelectronics is a robust switching regulator designed for industrial applications, operating b/w -40 °C and 85°C. It features a nominal voltage of 14.4V, 36 terminals in a small outline package, and supports surface mounting. Ideal for efficient power management in demanding environments.
R-PDSO-G36
36
SSOP
SSOP36,.56
245
14.4
.09 mA
14.4 V
BCDMOS
Matte Tin (Sn) - annealed
.635 mm
L5962
L5962 by STMicroelectronics is a robust switching regulator designed for industrial applications, operating b/w -40 °C to 85°C. It features a nominal voltage of 14.4V and supports up to 36 terminals in a compact SO package. Ideal for efficient power management, it ensures reliable performance with low supply current of just 0.09 mA.
VIPER27HD
VIPER27HD by STMicroelectronics is a switching controller with 16 terminals, operating at a max output current of 0.74 A and a switching frequency of 115 kHz. It utilizes pulse width modulation control technique for applications requiring efficient power management in compact spaces. The device is designed for use in various electronics where small outline packaging and high efficiency are essential.
.74 A
115 kHz
© 2023 All rights reserved
