Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
UBA20272T/1,518
NXP Semiconductors
UBA20272T/1,518 by NXP Semiconductors is a robust switching regulator designed for industrial applications. It operates at a nominal voltage of 13V and withstands temperatures from -40 °C to 85 °C. Its compact surface mount design features 20 terminals with gull-wing form for efficient integration.
R-PDSO-G20
3
20
85 Cel
-40 Cel
PLASTIC/EPOXY
SOP
SOP20,.4
RECTANGULAR
SMALL OUTLINE
260
13
Not Qualified
Switching Regulator or Controllers
13 V
YES
INDUSTRIAL
GULL WING
1.27 mm
DUAL
UBA2016AP/1,112
UBA2016AP/1,112 by NXP Semiconductors is a robust switching regulator designed for automotive applications. It operates at a nominal voltage of 12.5 V, with a wide temperature range from -40 °C to 125 °C. This 20-terminal device features a dual terminal position and through-hole design for easy integration.
R-PDIP-T20
125 Cel
DIP
DIP20,.3
IN-LINE
12.5
12.5 V
NO
AUTOMOTIVE
THROUGH-HOLE
2.54 mm
UBA2015T/1,118
UBA2015T/1,118 by NXP Semiconductors is a robust switching regulator designed for automotive applications. It operates at a nominal voltage of 12.5V and withstands temperatures from -40 °C to 125 °C. This surface-mount device features a compact rectangular package with 20 terminals for efficient integration.
1
UBA2015AP/1,112
UBA2015AP/1,112 by NXP Semiconductors is a robust switching regulator designed for automotive applications. It operates at a nominal voltage of 12.5 V and supports temperatures from -40 °C to 125 °C. With 20 terminals in an in-line package, it ensures reliable performance in demanding environments.
UBA20261T/1,518
UBA20261T/1,518 by NXP Semiconductors is a robust switching regulator designed for industrial applications. It operates at a nominal voltage of 13V, with a temperature range from -40 °C to 85 °C. This surface-mount device features a compact 20-terminal gull-wing package for efficient integration.
UBA20262T/1,518
UBA20262T/1,518 by NXP Semiconductors is a robust switching regulator designed for industrial applications. It operates at a nominal voltage of 13V and supports temperatures from -40 °C to 85 °C. Its compact 20-terminal gull-wing package ensures efficient surface mounting.
LV5050NV-TLM-E
Onsemi
LV5050NV-TLM-E by Onsemi is a voltage-mode switching regulator with a max operating temperature of 85°C and a max switching frequency of 1100 kHz. This BICMOS technology device comes in a small outline package, making it suitable for various applications requiring high-frequency power conversion.
VOLTAGE-MODE
e6
-20 Cel
SSOP
SSOP20,.25
SMALL OUTLINE, SHRINK PITCH
1100 kHz
BICMOS
OTHER
Tin/Bismuth (Sn/Bi)
.635 mm
LV56351JA-AH
LV56351JA-AH by Onsemi is a BICMOS technology switching regulator with 20 terminals in a small outline package. It operates b/w -30°C to 85°C, featuring voltage-mode control. Ideal for applications requiring precise power regulation in compact spaces.
-30 Cel
LV56351JA-ZH
LV56351JA-ZH by Onsemi is a 20-terminal switching regulator with BICMOS technology. It operates b/w -30 °C to 85°C, in voltage-mode control. The small outline package makes it suitable for various applications requiring precise voltage regulation.
LV5781-TLM-E
LV5781-TLM-E by Onsemi is a VOLTAGE-MODE regulator with 225 kHz switching frequency and 3 A output current. It operates b/w -30 to 80 °C, suitable for commercial applications requiring high efficiency power management in a small outline package.
80 Cel
3 A
225 kHz
COMMERCIAL EXTENDED
NCP81039MNTWG
NCP81039MNTWG by Onsemi is a voltage-mode switching regulator with max. operating temp of 100 °C and freq. of 330 kHz. Ideal for industrial applications, it comes in a square chip carrier package with 20 terminals, tin finish, and operates b/w -40 to 100°C.
S-PQCC-N20
e3
100 Cel
QCCN
LCC20,.11SQ,16
SQUARE
CHIP CARRIER
330 kHz
Tin (Sn)
NO LEAD
.4 mm
QUAD
TPS53317RGBT
Texas Instruments
TPS53317RGBT by Texas Instruments is a voltage-mode switching regulator with 6A output current and 1000kHz max switching frequency. It operates b/w -40 to 85°C, suitable for industrial applications. With a compact chip carrier package style, it offers efficient power management in various electronic devices.
OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 2V
SWITCHING REGULATOR
PULSE WIDTH MODULATION
6 V
1 V
5 V
R-PQCC-N20
e4
4 mm
2
6 A
2 V
.6 V
HVQCCN
LCC20,.16SQ,20
1 mm
BUCK
1000 kHz
NICKEL PALLADIUM GOLD
.5 mm
30
3.5 mm
UCD7232RTJT
UCD7232RTJT by Texas Instruments is a voltage-mode switching controller with a 12V nominal input voltage and 6A max output current. Operating in an automotive temperature grade range, it features a control technique of pulse width modulation and a max switching frequency of 2000 kHz. This chip carrier package is suitable for various applications requiring precise voltage regulation.
SWITCHING CONTROLLER
15 V
4.7 V
12 V
.8 mm
10 mA
SINGLE
2000 kHz
BQ24130RHLT
BQ24130RHLT by Texas Instruments is a 20-terminal chip carrier with PWM control technique, suitable for industrial applications. It operates b/w -40 to 85°C, with a max output current of 4A and switching frequency of 700kHz. Ideal for battery charge control in compact designs requiring up to 17V input voltage.
BATTERY CHARGE CONTROLLER
17 V
4.5 V
4.5 mm
4 A
13.5 V
LCC20/24,.14X.18,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
4.5/17
Power Management Circuits
700 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
PM8803
STMicroelectronics
PM8803 by STMicroelectronics is a switching controller with current-mode control technique. It operates in industrial temperature range (-40 to 85 °C) and has a max switching frequency of 1MHz. With a nominal input voltage of 48V, it is suitable for various applications requiring high-frequency power conversion.
CURRENT-MODE
32.5 V
48 V
6.5 mm
HTSSOP
TSSOP20,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.2 mm
.65 mm
40
4.4 mm
NCP6914AFCAT1G
NCP6914AFCAT1G by Onsemi is a 20-terminal switching regulator with a nominal voltage of 3.6V, operating temperature range from -40 to 85 °C. It features a max output current of 1.6A and operates at a max switching frequency of 3300 kHz. Ideal for industrial applications requiring precise power management in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 3.3V; PFM CONTROL TECHNIQUE ALSO POSSIBLE
5.5 V
2.3 V
3.6 V
R-PBGA-B20
2.05 mm
1.6 A
VFBGA
BGA20,4X5,16
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
3.6
.6 mm
.19 mA
3300 kHz
BALL
BOTTOM
1.76 mm
NCP6914AFCDT1G
NCP6914AFCDT1G by Onsemi is a 20-terminal switching regulator with a max output current of 1.6A and a PWM control technique. It operates b/w -40 to 85 °C, making it suitable for industrial applications requiring precise power supplies up to 3.6V in a compact grid array package.
TPS51225BRUKT
DUAL SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
DUAL SWITCHING CONTROLLER
24 V
3 mm
10 A
3.3 V
PHASE-SHIFT
355 kHz
TPS51225CRUKT
TPS51225CRUKT by Texas Instruments is a dual switching controller with a max output current of 10A and a max switching frequency of 355kHz. It operates in industrial temperature grade range (-40 to 85°C) and has two outputs at nominal voltage of 3.3V, making it suitable for various power management applications.
ALSO OPERATES AT 5 VOLT OUTPUT
TPS51518RUKT
TPS51518RUKT by Texas Instruments is a voltage-mode switching controller with 20 terminals, operating b/w -10 to 105°C. It supports input voltages from 3-28V and output currents up to 20A, with a max output voltage of 2V. Ideal for applications requiring high efficiency power conversion in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5 TO 2V
28 V
3 V
105 Cel
-10 Cel
20 A
.5 V
PUSH-PULL
350 kHz
NB638DL-LF-Z
Monolithic Power Systems
Monolithic Power Systems' NB638DL-LF-Z is a 20-terminal switching regulator with current-mode control, operating b/w -40 to 125°C. With a buck switcher configuration and PWM control technique, it supports input voltages from 4.5V to 28V, making it ideal for automotive applications requiring precise regulation at up to 1000kHz frequency.
R-XQCC-N20
1.2 V
UNSPECIFIED
MATTE TIN
UCC28070APW
UCC28070APW by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 300 kHz and has a nominal voltage of 12 V, making it suitable for automotive applications requiring efficient power regulation in compact spaces.
POWER FACTOR CONTROLLER
21 V
10.8 V
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
12
20 mA
BOOST
300 kHz
TPS51275CRUKT
TPS51275CRUKT by Texas Instruments is a dual switching controller with a max output current of 20A and a max operating temperature of 125°C. It operates as a buck switcher with a nominal input voltage of 12V, making it suitable for automotive applications requiring efficient power regulation in compact spaces.
ADJUSTABLE OUTPUT MODE FROM 4.5 TO 5.5V AND 2.97 TO 3.63V
4
TPS51275RUKT
TPS51275RUKT by Texas Instruments is a dual switching controller with a max output current of 20A and a max switching frequency of 355kHz. It operates in industrial temperature grade, suitable for applications requiring precise power regulation in tight spaces. With a package style of chip carrier and very thin profile, it is ideal for compact electronic devices.
ADUM5210ARSZ-RL7
Analog Devices
ADUM5210ARSZ-RL7 by Analog Devices is a switching regulator with 20 terminals, operating at -40 to 105°C. It has a max switching frequency of 125000 kHz and uses pulse width modulation control technique. Ideal for industrial applications requiring a nominal input voltage of 3.3 V and output voltage of 3.3 V in a compact rectangular package style.
7.2 mm
SSOP20,.3
5
2 mm
Other Analog ICs
125000 kHz
CMOS
5.3 mm
ADUM5210ARSZ
ADUM5210ARSZ by Analog Devices is a 20-terminal switching regulator with a 5V nominal voltage and 3.3V input/output voltage. Operating b/w -40 to 105°C, it utilizes pulse width modulation control technique for industrial applications requiring high-frequency operation up to 125kHz.
ALSO WORKS WITH 5 VOLT INPUT VOLTAGE WHICH GIVES 5VOLT AND 3.3 VOLT OUTPUT
ADUM5210BRSZ-RL7
ADUM5210BRSZ-RL7 by Analog Devices is a switching regulator with 5V nominal voltage, 125kHz max switching frequency, and 3.3V nominal output voltage. It is used in industrial applications requiring precise power control in compact spaces due to its small outline package and pulse width modulation control technique.
ADUM5210BRSZ
ADUM5210BRSZ by Analog Devices is a 20-terminal switching regulator with a nominal voltage of 5V and max operating temperature of 105°C. It features pulse width modulation control technique, CMOS technology, and a max switching frequency of 125kHz. Ideal for industrial applications requiring precise power regulation in compact spaces.
ADUM5210CRSZ-RL7
ADUM5210CRSZ-RL7 by Analog Devices is a switching regulator with 5V nominal voltage, 3.3V nominal input voltage, and 125000 kHz max switching frequency. It is ideal for industrial applications requiring pulse width modulation control technique in a compact rectangular package with dual terminals.
ADUM5211CRSZ
ADUM5211CRSZ by Analog Devices is a switching regulator with 5V nominal voltage, 3.3V nominal input and output voltage, and 125000 kHz max switching frequency. It is used in industrial applications requiring pulse width modulation control technique for power supplies.
ADUM5212ARSZ-RL7
ADUM5212ARSZ-RL7 by Analog Devices is a switching regulator with 20 terminals, operating at -40 to 105°C. It has a nominal input voltage of 3.3V and output voltage of 3.3V, suitable for industrial applications requiring pulse width modulation control up to 125kHz frequency. The package is small outline, shrink pitch with matte tin finish and gull wing terminal form.
ADUM5212BRSZ-RL7
ADUM5212BRSZ-RL7 by Analog Devices is a switching regulator with 20 terminals, operating at -40 to 105°C. It has a max switching frequency of 125kHz and uses pulse width modulation control technique. Ideal for industrial applications requiring a nominal input voltage of 3.3V and output voltage of 3.3V in a compact rectangular package style.
ADUM5212BRSZ
ADUM5212BRSZ by Analog Devices is a switching regulator with 20 terminals, operating at -40 to 105°C. It has a max switching frequency of 125kHz and uses pulse width modulation control technique. Ideal for industrial applications requiring a nominal input voltage of 3.3V and output voltage of 3.3V.
ADUM5212CRSZ-RL7
ADUM5212CRSZ-RL7 by Analog Devices is a 20-terminal switching regulator with a 5V nominal voltage, operating b/w -40 to 105°C. It utilizes pulse width modulation control technique, achieving a max switching frequency of 125kHz. Ideal for industrial applications requiring precise power supplies in compact spaces.
ADUM5212CRSZ
ADUM5212CRSZ by Analog Devices is a switching regulator with 20 terminals, operating at -40 to 105°C. It has a max switching frequency of 125kHz and uses pulse width modulation control technique. Ideal for industrial applications requiring a nominal input voltage of 3.3V and output voltage of 3.3V, with a supply voltage of 5V.
PRM48BH480T250A00
Vicor
Vicor PRM48BH480T250A00 is a 250W switching regulator with 96.7% efficiency, VOLTAGE-MODE control mode, and 5.21A output current. Ideal for automotive applications due to its AUTOMOTIVE temperature grade and OVER CURRENT protection feature.
TUV, CE
96.7 %
6.98 mm
55 V
38 V
R-XQMA-J20
22 mm
.2 %
5.21 A
20 V
QMA
MICROELECTRONIC ASSEMBLY
OVER CURRENT
Power Supply Modules
1070 kHz
HYBRID
J BEND
250 W
16.5 mm
LM25576Q0MHX/NOPB
LM25576Q0MHX/NOPB by Texas Instruments is a switching regulator with 5.1A output current, 545kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 6-42V.
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE AS LOW AS 1.225V, SEATED HGT-NOM
42 V
5.1 A
1.1 mm
545 kHz
LM3102QMH/NOPB
LM3102QMH/NOPB by Texas Instruments is a switching regulator with 20 terminals, VOLTAGE-MODE control mode, and 3.3V nominal output voltage. It operates b/w -40 to 125 °C and supports a max output current of 2.5A. Ideal for automotive applications due to its compact size and high efficiency at up to 1000 kHz switching frequency.
SEATED HGT-NOM, ADJUSTABLE OUTPUT VOLTAGE IS DOWN TO 0.8V
18 V
2.5 A
7 V
.8 V
MOS
TPS54362HPWP
TPS54362HPWP by Texas Instruments is a switching regulator with 1A output current, 18V max output voltage, and 2200kHz max switching frequency. Ideal for military applications due to its MILITARY temperature grade and VOLTAGE-MODE control mode. It operates b/w -55°C to 175°C, making it suitable for harsh environments.
ADJUSTABLE OUTPUT MODE FROM 0.9 TO 18 V
PULSE FREQUENCY MODULATION
60 V
175 Cel
-55 Cel
1 A
.9 V
2200 kHz
MILITARY
TPS56921PWPR
TPS56921PWPR by Texas Instruments is a 20-terminal switching regulator with a max output current of 22A and a control mode of current-mode PWM. With a wide operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
22 A
1.48 V
.72 V
1600 kHz
LM25117QPMH/NOPB
LM25117QPMH/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 41V. It is ideal for automotive applications due to its compact size, high output current of 20A, and pulse width modulation control technique.
SEATED HGT-NOM, PROGRAMMABLE OUTPUT FROM 0.8V
41 V
750 kHz
LM25117QPMHE/NOPB
LM25117QPMHE/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 41V. Ideal for automotive applications, it features a current-mode control mode, pulse width modulation technique, and max output current of 20A.
LM25117QPMHX/NOPB
LM25117QPMHX/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.8V to 41V. It is ideal for automotive applications due to its compact size (6.5mm x 4.4mm) and high output current capability of up to 20A at a max switching frequency of 750kHz.
LM5117PMHE/NOPB
LM5117PMHE/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating b/w -40 to 125°C. It supports a max output voltage of 62V and current up to 20A, ideal for automotive applications due to its compact size and pulse width modulation control mode. With a switching frequency of 750kHz, it efficiently converts input voltages from 5.5V to 65V into outputs as low as 0.8V.
65 V
62 V
LM5117QPMH/NOPB
LM5117QPMH/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 62V. Ideal for automotive applications, it features a current-mode control mode, pulse width modulation technique, and max output current of 20A.
LM5117QPMHE/NOPB
LM5117QPMHE/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating at -40 to 125°C. It supports a wide input voltage range of 5.5-65V and delivers up to 20A output current at a max frequency of 750kHz. Ideal for automotive applications due to its compact size, high efficiency, and pulse width modulation control mode.
LM5117QPMHX/NOPB
LM5117QPMHX/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 62V. Ideal for automotive applications, it features a buck switcher configuration, current-mode control mode, and supports a max output current of 20A.
LM5576Q0MH/NOPB
LM5576Q0MH/NOPB by Texas Instruments is a 20-terminal switching regulator with a max output voltage of 70V and current of 3A. Operating b/w -40 to 150°C, it uses pulse width modulation for buck configuration in automotive applications. With a compact design and high switching frequency of 500kHz, it's ideal for power management in various systems.
ADJUSTABLE OUTPUT VOLTAGE AS LOW AS 1.225V, SEATED HGT-NOM
75 V
150 Cel
70 V
1.23 V
500 kHz
© 2023 All rights reserved
