Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ADG836YRMZ
Analog Devices
ADG836YRMZ by Analog Devices is a CMOS SPDT switch with 2 channels, 1.8/3.3V power supplies, and 1.4 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, wide temperature range (-40 to 125°C), and high isolation (67 dB).
CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES
SPDT
S-PDSO-G10
e3
3 mm
1
NC
2
10
67 dB
.1 ohm
1.4 ohm
125 Cel
-40 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
TSSOP
TSSOP10,.19,20
SQUARE
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
260
1.8/3.3
Not Qualified
1.1 mm
Multiplexer or Switches
1.95 V
1.65 V
1.8 V
YES
9 ns
37 ns
BREAK-BEFORE-MAKE
CMOS
AUTOMOTIVE
MATTE TIN
GULL WING
.5 mm
DUAL
40
ADG836YRMZ-REEL
ADG836YRMZ-REEL by Analog Devices is a CMOS SPDT switch with 2 channels, 1.8V nominal voltage, and 1.4 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125 °C.
ADG1438BRUZ-REEL7
ADG1438BRUZ-REEL7 by Analog Devices is a 20-terminal SPDT switch with 25 ohm Ron, suitable for automotive applications. It operates at -40 to 125 °C and supports Vsup range of +-5/+-15/12 V. With fast switching times of 350 ns, it offers high isolation of 70 dB for precise signal routing.
R-PDSO-G20
6.5 mm
-16.5 V
-4.5 V
-5 V
20
70 dB
.6 ohm
25 ohm
TSSOP20,.25
RECTANGULAR
+-5/+-15/12
1.2 mm
.03 A
.001 mA
16.5 V
4.5 V
5 V
350 ns
.65 mm
4.4 mm
ADG1438BRUZ
ADG1438BRUZ by Analog Devices is a SPDT multiplexer with 20 terminals, operating at -40 to 125°C. It features a max on-state resistance of 25 ohm and switching time of 350 ns. Ideal for automotive applications due to its CMOS technology and small outline package design.
ADG1439BRUZ-REEL7
ADG1439BRUZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 20 terminals, and 25 ohm on-state resistance. It operates in automotive-grade temperatures from -40 to 125 °C and is ideal for signal routing applications requiring fast switching times.
30
ADG1611BCPZ-REEL7
ADG1611BCPZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive-grade temperature range (-40 to 125°C) and has separate outputs. Ideal for multiplexing applications due to its fast switching time (493 ns) and break-before-make feature.
SPST
S-XQCC-N16
3
NO
4
16
4 ohm
UNSPECIFIED
QCCN
LCC16,.16SQ,25
CHIP CARRIER
3.3/12/+-5
493 ns
NO LEAD
.635 mm
QUAD
ADG1611BCPZ-REEL
ADG1611BCPZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 1.2 ohm Ron, and 70 dB isolation. Ideal for automotive applications, it operates b/w -40 to 125 °C with separate outputs and a max seated height of 1 mm.
4 mm
-8 V
-3.3 V
.04 ohm
1.2 ohm
HVQCCN
1 mm
8 V
3.3 V
159 ns
285 ns
ADG1613BCPZ-REEL
ADG1613BCPZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive-grade temperature range (-40 to 125 °C) and has separate output voltage supplies (3.3/12/±5V). Ideal for applications requiring fast switching (493ns) in a square chip carrier package.
NO/NC
ADG1613BRUZ-REEL
ADG1613BRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive-grade temperature range (-40 to 125°C) and supports power supplies of 3.3V, 12V, ±5V. Ideal for applications requiring fast switching (493 ns) and separate output control.
R-PDSO-G16
TSSOP16,.25
SMALL OUTLINE
ADG1613BRUZ
ADG1613BRUZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive grade temperature range (-40 to 125°C) and has separate output voltage supplies (3.3/12/±5V). Ideal for applications requiring fast switching (493ns) and break-before-make functionality in small outline packages.
ADG1636BRUZ
ADG1636BRUZ by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and is ideal for automotive applications requiring separate output switching with a nominal voltage of 5 V.
5 mm
-5.5 V
5.5 V
281 ns
176 ns
ADV3226ACPZ
ADV3226ACPZ by Analog Devices is a 16-channel cross point switch with 80 dB off-state isolation. It operates b/w -40 to 85 °C, with +-5 V power supplies and a terminal pitch of 0.4 mm. Ideal for industrial applications requiring separate outputs in a compact square package.
CROSS POINT SWITCH
S-CQCC-N100
12 mm
100
80 dB
85 Cel
CERAMIC, METAL-SEALED COFIRED
LCC100,.47SQ,16
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
+-5
.9 mm
INDUSTRIAL
Matte Tin (Sn) - annealed
.4 mm
ADV3227ACPZ
ADV3227ACPZ by Analog Devices is a 16-channel cross point switch with a nominal voltage of 5V. It features separate outputs, -5/+5V power supplies, and offers 75dB off-state isolation. Ideal for industrial applications requiring high channel count and precise signal routing in a compact chip carrier package.
75 dB
SN65LVCP202RGET
Texas Instruments
Texas Instruments SN65LVCP202RGET is a 24-terminal cross point switch with 3.3V supplies, operating from -40 to 85°C. It features separate outputs, dual terminal position, and small outline package for industrial applications requiring high-speed signal switching in compact designs.
R-PDSO-G24
e4
24
LCC24,.16SQ,20
3.3
.115 mA
3.465 V
3.135 V
NICKEL PALLADIUM GOLD
SN65LVCP408PAPR
Texas Instruments SN65LVCP408PAPR is an 8-channel cross point switch with a supply voltage range of 3.135V to 3.465V. It operates in industrial temperature grade (-40°C to 85°C) and has a max seated height of 1.2mm, making it suitable for various applications requiring high-speed signal switching in compact spaces.
S-PQFP-G64
10 mm
8
64
HTFQFP
TQFP64,.47SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
440 mA
NLAS4501DTT1G
Onsemi
NLAS4501DTT1G by Onsemi is a CMOS SPST switch with 5 terminals, operating b/w -55 to 125 °C. It has a max on-state resistance of 55 ohm and offers 93 dB off-state isolation. Ideal for military-grade applications requiring a compact, surface-mountable solution with fast switching times.
R-PDSO-G5
5
93 dB
55 ohm
-55 Cel
TSOP5/6,.11,37
2/5.5
2 V
3 V
16 ns
12 ns
MILITARY
Tin (Sn)
.95 mm
1.5 mm
NLAS4684FCT1G
NLAS4684FCT1G by Onsemi is a SPDT switch with 2 functions, operating at -55 to 125 °C. It has a low on-state resistance of 1 ohm and provides 65 dB isolation. Ideal for military-grade applications requiring fast switching times and precise control in compact spaces.
R-PBGA-B10
e1
1.965 mm
65 dB
.06 ohm
1 ohm
VFBGA
BGA10,3X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
2/5
50 ns
60 ns
Tin/Silver/Copper (Sn/Ag/Cu)
BALL
BOTTOM
1.465 mm
NLAS4684MR2G
NLAS4684MR2G by Onsemi is a CMOS SPDT switch with 2 functions, operating at supply voltages of 1.8V to 5.5V. With a max on-state resistance of 1 ohm and off-state isolation of 65 dB, it's ideal for military-grade applications requiring fast switching times (60ns on, 50ns off) in a compact package (3x3mm).
MC74VHC1G66DTT1G
MC74VHC1G66DTT1G by Onsemi is a SPST switch with 60 ohm Ron, 50 ns switch-on/off time, and 80 dB isolation. It operates at -55 to 125 °C, ideal for military-grade applications requiring fast switching and high isolation in a compact SOT package.
0 V
60 ohm
.04 mA
MAKE-BEFORE-BREAK
AD8109ASTZ
AD8109ASTZ by Analog Devices is an 80-terminal, 8-channel cross point switch with a 5V supply voltage. Featuring a low profile flatpack package, it operates b/w -40 to 85 °C and offers separate outputs. Ideal for industrial applications requiring high off-state isolation and fast switching times of up to 180ns.
S-PQFP-G80
80
98 dB
LFQFP
QFP80,.55SQ,20
FLATPACK, LOW PROFILE, FINE PITCH
1.6 mm
180 ns
BIPOLAR
AD8114ASTZ
AD8114ASTZ by Analog Devices is a 16-channel cross point switch with separate output. It operates at -40 to 85 °C, with Vsup ranging from 4.5 to 5.5 V. This low-profile, fine-pitch device in a square package is ideal for industrial applications requiring high off-state isolation and quad terminal position.
S-PQFP-G100
14 mm
90 dB
QFP100,.63SQ,20
AD8180ARZ
AD8180ARZ by Analog Devices is a video multiplexer with 2 channels, operating at -40 to 85°C. It has a supply voltage range of ±5V, offering 89dB off-state isolation. With a compact rectangular package and dual terminals, it's ideal for industrial applications requiring fast switching times of 10ns.
VIDEO MULTIPLEXER
R-PDSO-G8
4.9 mm
-6 V
-4 V
89 dB
SOP
SOP8,.25
1.75 mm
4.75 mA
6 V
4 V
10 ns
1.27 mm
3.9 mm
AD8182ARZ
AD8182ARZ by Analog Devices is a video multiplexer with 2 channels, operating at ±5V supplies. It features a small outline package, industrial temperature grade, and 93dB off-state isolation. Ideal for applications requiring fast switching times and high supply voltage tolerance in industrial settings.
R-PDSO-G14
8.65 mm
14
SOP14,.25
8.5 mA
ADG512BRZ
ADG512BRZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 68 dB. Ideal for industrial applications requiring fast switching times and high reliability in a compact small outline package.
9.9 mm
68 dB
50 ohm
SOP16,.25
3.3/+-5
MIL-STD-883
150 ns
375 ns
ADG526AKPZ-REEL
ADG526AKPZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 16 channels. It operates at -40 to 85 °C, with a max supply voltage of 16.5 V and on-state resistance of 450 ohm. Ideal for industrial applications requiring fast switching times and high isolation levels.
SINGLE-ENDED MULTIPLEXER
S-PQCC-J28
11.505 mm
-10.8 V
-15 V
28
5 ohm
450 ohm
QCCJ
LDCC28,.5SQ
12/15,GND/-12/-15
4.57 mm
.02 A
1.5 mA
10.8 V
15 V
300 ns
J BEND
ADG713BRUZ-REEL
ADG713BRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 3V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and offers low on-state resistance (8 ohm). Ideal for applications requiring fast switching times and high isolation levels.
CAN ALSO OPERATE WITH 5 V SUPPLY
58 dB
8 ohm
3/5
20 ns
ADG739BRUZ
ADG739BRUZ by Analog Devices is a CMOS multiplexer with 2 functions, 4 channels, and 16 terminals. It operates b/w -40 to 85°C, with a max supply voltage of 5.5V. Ideal for audio/video switching applications due to its low on-state resistance of 11 ohm and high off-state isolation of 55 dB.
AUDIO/VIDEO SWITCH
55 dB
.4 ohm
11 ohm
2.7 V
25 ns
70 ns
ADG739BRUZ-REEL
ADG739BRUZ-REEL by Analog Devices is a CMOS audio/video switch with 4 channels. It operates at -40 to 85 °C, with a max on-state resistance of 11Ω and nominal off-state isolation of 75dB. Ideal for industrial applications requiring fast switching times and low power consumption.
DG303BDY-E3
Vishay Intertechnology
Vishay Intertechnology's DG303BDY-E3 is a CMOS DPST switch with 2 functions, -40 to 85 °C operating temp range, and 50 ohm max on-state resistance. Ideal for industrial applications requiring separate output control at +-15 V supplies. Small outline package with dual terminals and matte tin finish ensures reliable performance in compact designs.
DPST
62 dB
+-15
1 mA
130 ns
DG406BDN-E3
Vishay Intertechnology's DG406BDN-E3 is a CMOS single-ended multiplexer with 16 channels. It operates at industrial temperature grade, with a max supply voltage of 20V and on-state resistance of 60 ohm. Ideal for applications requiring high-speed switching and precise signal routing in electronic circuits.
11.5062 mm
-20 V
86 dB
3 ohm
12/+-15
20 V
94 ns
123 ns
DG408DQ-E3
Vishay Intertechnology's DG408DQ-E3 is a CMOS multiplexer with 8 channels, featuring a max on-state resistance of 100 ohm and nominal off-state isolation of 75 dB. With a package style of small outline and thin profile, it operates in industrial temperature grades from -40 to 85 °C, making it ideal for high-performance switching applications.
15 ohm
100 ohm
SSOP16,.25
Matte Tin (Sn)
DG408LDY-E3
Vishay Intertechnology's DG408LDY-E3 is a BICMOS technology single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-12V and offers a max on-state resistance of 40 ohms. With industrial temperature grade, it suits applications requiring high-speed switching in compact designs.
VIDEO APPLICATION
-3 V
40 ohm
3/12/+-5
.7 mA
45 ns
BICMOS
DG419LDY-E3
Vishay Intertechnology's DG419LDY-E3 is a SPDT multiplexer with 8 terminals, operating at -40 to 85°C. It has a max on-state resistance of 18.5 ohm and switching time of 44 ns, suitable for industrial applications requiring high-speed signal routing in compact spaces. The package style is small outline with gull wing terminals, making it ideal for surface mount PCB designs.
71 dB
18.5 ohm
+-3/+-6/3/12
33 ns
44 ns
DG444DY-E3
Vishay Intertechnology's DG444DY-E3 is a CMOS SPST switch with 4 functions, 16 terminals, and -40 to 85°C operating temperature range. With a max on-state resistance of 85 ohm and switching time of 250 ns, it suits industrial applications requiring high isolation (60 dB) and separate output voltages at ±15 V supplies.
60 dB
85 ohm
5,12/+-15
140 ns
250 ns
DG613DY-E3
Vishay Intertechnology's DG613DY-E3 is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 45 ohm, switching time of 50 ns, and industrial temperature grade. Ideal for applications requiring fast signal routing in compact spaces.
-10 V
74 dB
2 ohm
45 ohm
5,15,-3
21 V
35 ns
NMOS
DG884DN-E3
Vishay Intertechnology's DG884DN-E3 is an 8-channel NMOS cross point switch with a max on-state resistance of 90 ohm. Operating b/w -40 to 85 °C, it has a switching voltage range of 10-20 V and a fast switch-on time of 300 ns. Ideal for industrial applications requiring precise signal routing in compact spaces.
8 X 4 ARRAY
S-PQCC-J44
16.5862 mm
44
90 ohm
LDCC44,.7SQ
10 V
175 ns
DG9431DV-T1-E3
Vishay Intertechnology's DG9431DV-T1-E3 is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 74 dB. Ideal for industrial applications requiring fast switching times and low power consumption.
R-PDSO-G6
3.05 mm
6
TSOP6,.11,37
12 V
120 ns
1.65 mm
MAX4854HETE
Maxim Integrated
MAX4854HETE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It has a supply voltage range of 2-5.5V, on-state resistance of 9 ohm, and switching time of 60ns. Ideal for industrial applications requiring high isolation (80dB) and low on-state resistance (0.2 ohm).
e0
.2 ohm
9 ohm
LCC16,.12SQ,20
245
.8 mm
40 ns
TIN LEAD
NLAST44599MNR2G
DPDT; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
DPDT
105 ohm
2.5/5
2.5 V
NICKEL GOLD PALLADIUM
ADG936BRU-500RL7
ADG936BRU-500RL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 20 terminals, and 36 dB isolation. It operates b/w -40 to 85 °C, ideal for industrial applications requiring fast switching times of 13-14 ns. The small outline package with thin profile and shrink pitch makes it suitable for space-constrained designs.
36 dB
240
2.75 V
13 ns
14 ns
ADG936BRU-R-500RL7
ADG936BRU-R-500RL7 by Analog Devices is a CMOS SPDT switch with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers 36dB isolation. Ideal for industrial applications requiring fast switching times in a compact thin profile package.
ADG936BRU-R-REEL7
ADG936BRU-R-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, operating at -40 to 85 °C. With a supply voltage range of 1.65V to 2.75V, it offers 36dB isolation and fast switching times of 13-14ns. Ideal for industrial applications requiring compact, surface-mount switches with high performance capabilities.
ADG936BRU-R-REEL
ADG936BRU-R-REEL by Analog Devices is a CMOS SPDT switch with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers 36dB isolation. Ideal for industrial applications requiring fast switching times in a compact, surface-mount package.
MAX4735ETE
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
S-PQCC-N16
66 dB
.015 ohm
3/3.3
3.6 V
1.6 V
200 ns
NLAS4783MN1R2G
NLAS4783MN1R2G by Onsemi is a 16-terminal SPDT multiplexer with a max on-state resistance of 1 ohm. Operating b/w -40 to 85°C, it has a nominal voltage range of 1.65-2.7V and supports power supplies of 1.8/3.3V. Ideal for industrial applications requiring fast switching times and high isolation levels up to 62 dB.
HVSSOP
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH
4.7 V
27 ns
STMUX1000LQTR
STMicroelectronics
STMUX1000LQTR from STMicroelectronics is a 16-channel single-ended multiplexer with a max on-state resistance of 7.5Ω and operates b/w -40 °C to 85 °C. It features a compact chip carrier design, ideal for space-constrained applications. With a nominal voltage of 3.3V, it ensures efficient signal routing in industrial settings.
R-PQCC-N56
11 mm
56
.5 ohm
7.5 ohm
LCC56,.19X.43,20
.5 mA
30 ns
Nickel/Palladium/Gold (Ni/Pd/Au)
MAX4702ETE
76 dB
75 ohm
MC74LVX8051MEL
MC74LVX8051MEL by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2.5V to 6V, offering low on-state resistance of 50 ohm and fast switch-on time of 15ns. Ideal for military-grade applications requiring small outline packages and high isolation levels.
10.2 mm
37 dB
SOP16,.3
2/6
2.05 mm
.16 mA
15 ns
5.275 mm
© 2023 All rights reserved
