Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
CD74HC4016PWR
Texas Instruments
CD74HC4016PWR by Texas Instruments is a CMOS SPST multiplexer with 4 functions, operating b/w -55 to 125 °C. It has a max on-state resistance of 320 ohm and switching time of 38 ns. Ideal for military-grade applications requiring high isolation and low on-state resistance in a compact package.
SPST
R-PDSO-G14
5 mm
NO
1
4
14
62 dB
10 ohm
320 ohm
125 Cel
-55 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
TSSOP
TSSOP14,.25
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
NOT SPECIFIED
2/10
Not Qualified
1.2 mm
Multiplexer or Switches
10 V
2 V
4.5 V
YES
29 ns
38 ns
BREAK-BEFORE-MAKE
CMOS
MILITARY
GULL WING
.65 mm
DUAL
4.4 mm
ADG412BRU-REEL7
Analog Devices
ADG412BRU-REEL7 by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates b/w -40 to 85 °C and supports supply voltages of +/-15V. Ideal for industrial applications requiring high isolation and fast switching times.
ALSO OPERATE WITH 12V SINGLE SUPPLY
R-PDSO-G16
e0
-16.5 V
-13.5 V
-15 V
16
68 dB
35 ohm
85 Cel
-40 Cel
TSSOP16,.25
240
5,12/+-15
16.5 V
13.5 V
15 V
145 ns
175 ns
INDUSTRIAL
TIN LEAD
30
ADG412BRU-REEL
ADG412BRU-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has separate outputs for Vsup ranging from -13.5V to +16.5V. Ideal for applications requiring high isolation (68 dB) and fast switching times (175 ns).
ADG412BRUZ-REEL
ADG412BRUZ-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates b/w -40 to 85 °C and supports supply voltages of +/-15V. Ideal for industrial applications requiring high isolation and fast switching times.
e3
260
MATTE TIN
ADG412BRUZ
ADG412BRUZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 35 ohm and switching voltage of ±15V. Ideal for industrial applications requiring high isolation (68 dB) and fast switching times (175 ns).
ADG701BRJ-500RL7
ADG701BRJ-500RL7 by Analog Devices is a SPST switch with 5 terminals, operating at 3V. It offers low on-state resistance of 5 ohm and fast switching times of 20ns on and 13ns off. Ideal for industrial applications requiring high isolation (55dB) in a compact package.
R-PDSO-G5
2.9 mm
5
55 dB
5 ohm
LSSOP
TSOP5/6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
3/5
1.45 mm
5.5 V
1.8 V
3 V
13 ns
20 ns
.95 mm
1.6 mm
ADG701BRJ-REEL7
ADG701BRJ-REEL7 by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching in compact designs.
ADG701BRJ-REEL
ADG701BRJ-REEL by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching in compact designs.
ADG702BRJ-500RL7
ADG702BRJ-500RL7 by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. With a max on-state resistance of 5 ohm and switching time of 20 ns, it's ideal for industrial applications requiring fast and efficient signal routing in compact spaces. The CMOS technology and low profile package make it suitable for high-performance multiplexing tasks.
NC
ADG702BRJ-REEL7
ADG702BRJ-REEL7 by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching in compact designs.
ADG702BRJ-REEL
ADG702BRJ-REEL by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching behavior in a compact SMD package.
ISL43142IRZ-T
Intersil
ISL43142IRZ-T by Intersil is a 4-function SPST switch with a max on-state resistance of 65 ohm. Operating in industrial temperatures, it has a supply voltage range from -6V to +6V and fast switching times of 80ns turn-on and 30ns turn-off. Ideal for applications requiring precise signal routing in compact spaces.
S-PQCC-N16
3 mm
2
-6 V
-2 V
-5 V
NO/NC
2 ohm
65 ohm
HVQCCN
LCC16,.12SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
3/12/+-5
1 mm
6 V
5 V
30 ns
80 ns
NO LEAD
.5 mm
QUAD
DG406EUI
Maxim Integrated
DG406EUI by Maxim Integrated is a CMOS single-ended multiplexer with 16 channels. It operates at a nominal voltage of +/-15V and has a max on-state resistance of 100 ohm. With a small outline package, it is ideal for industrial applications requiring precise signal switching in tight spaces.
SINGLE-ENDED MULTIPLEXER
R-PDSO-G28
9.7 mm
-20 V
-4.5 V
28
69 dB
1.5 ohm
100 ohm
TSSOP28,.25
12/+-15
1.1 mm
.03 A
1 mA
20 V
150 ns
200 ns
MC14067BDWG
Onsemi
MC14067BDWG by Onsemi is a 24-terminal CMOS multiplexer with 16 channels. It operates at temperatures ranging from -55 to 125 °C and has a max supply voltage of 18 V. With a small outline package style, it is ideal for military-grade applications requiring high on-state resistance match and off-state isolation.
R-PDSO-G24
15.395 mm
3
24
40 dB
25 ohm
1050 ohm
SOP
SOP24,.4
SMALL OUTLINE
5/15
2.65 mm
.025 A
.6 mA
18 V
625 ns
600 ns
1.27 mm
7.5 mm
NBSG72AMNG
NBSG72AMNG by Onsemi is a 16-terminal cross point switch with a supply voltage range of +-2.5/+-3.3V, suitable for industrial applications. Featuring a compact square package style and surface mount design, it operates b/w -40 to 85°C with terminal finish in nickel gold palladium for reliability. Ideal for multiplexers & switches requiring low-profile solutions.
NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V
CROSS POINT SWITCH
S-XQCC-N16
UNSPECIFIED
+-2.5/+-3.3
3.465 V
2.375 V
2.5 V
NICKEL GOLD PALLADIUM
NLAS4599DFT2G
NLAS4599DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and nominal off-state isolation of 93 dB. Ideal for military-grade applications requiring fast switching times and low resistance.
SPDT
R-PDSO-G6
2 mm
6
93 dB
3 ohm
40 ohm
TSSOP6,.08
2/5.5
15 ns
Matte Tin (Sn) - annealed
40
1.25 mm
NLAS4684MNR2G
NLAS4684MNR2G by Onsemi is a CMOS SPDT switch with 2 functions, operating at -55 to 125 °C. It has a max on-state resistance of 1 ohm and nominal off-state isolation of 65 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
S-XDSO-N10
10
65 dB
.06 ohm
1 ohm
HVSON
SOLCC10,.11,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
2/5
50 ns
60 ns
ADG904BRU-R-REEL7
ADG904BRU-R-REEL7 by Analog Devices is a CMOS multiplexer with 4 channels, operating at -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers off-state isolation of 37dB. This small outline switch is ideal for industrial applications requiring fast switching times of 10-16ns.
R-PDSO-G20
6.5 mm
20
37 dB
2.75 V
1.65 V
16 ns
10 ns
ADG904BRU-R-REEL
ADG904BRU-R-REEL by Analog Devices is a CMOS multiplexer with 4 channels, operating at -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers 37 dB isolation. Ideal for industrial applications requiring fast switching times (10 ns on, 16 ns off) in a compact package (6.5mm x 4.4mm).
ADG904BRU-R
ADG904BRU-R by Analog Devices is a CMOS multiplexer with 4 channels, operating b/w -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers off-state isolation of 37 dB. Ideal for industrial applications requiring fast switching times (10-16 ns) in a compact package (6.5mm x 4.4mm).
DG411MY/PR
SPST; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SOP16,.25
AD8108ASTZ
AD8108ASTZ by Analog Devices is an 80-terminal cross point switch with a 5V supply voltage, -40 to 85°C operating temperature range, and 180ns max switch-on time. It is ideal for industrial applications requiring separate output channels, high off-state isolation of 93dB, and fast switching capabilities.
S-PQFP-G80
12 mm
-5.5 V
8
80
LFQFP
QFP80,.55SQ,20
FLATPACK, LOW PROFILE, FINE PITCH
180 ns
BIPOLAR
AD8110ASTZ
AD8110ASTZ by Analog Devices is an 80-terminal multiplexer with a 5V supply voltage, -5V power supplies, and separate outputs. It features a low profile flatpack package suitable for industrial applications like cross point switching. With a wide operating temperature range of -40 to 85°C, it offers high off-state isolation at 93dB.
+-5
AD8152JBPZ
AD8152JBPZ by Analog Devices is a 34-channel cross point switch with 57 ohm on-state resistance. It operates b/w 0-85 °C, has a supply voltage range of 2.25-3.63V, and features a low-profile grid array package suitable for surface mount applications.
S-PBGA-B256
e1
27 mm
34
256
57 ohm
0 Cel
LBGA
GRID ARRAY, LOW PROFILE
1.7 mm
3.63 V
2.25 V
OTHER
TIN SILVER COPPER
BALL
BOTTOM
ADG431BRZ-REEL
ADG431BRZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 24 ohm and switching voltage of +-15V. Ideal for industrial applications requiring precise signal routing in compact spaces.
CAN ALSO OPERATE WITH 12V SUPPLY
9.9 mm
.85 ohm
24 ohm
1.75 mm
130 ns
165 ns
3.9 mm
ADG453BRZ
ADG453BRZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 12 ohm max on-state resistance. It operates b/w -40 to 85 °C and has a small outline package suitable for industrial applications requiring separate outputs. With a nominal voltage of 5 V, it offers break-before-make switching and high off-state isolation at -5 V.
.3 ohm
12 ohm
140 ns
220 ns
ADG507AKPZ
ADG507AKPZ by Analog Devices is a CMOS differential multiplexer with 8 channels and a max on-state resistance of 450 ohm. It operates at an industrial temperature grade range from -40 to 85 °C, suitable for various switching applications requiring high isolation and low signal current. The chip carrier package style with matte tin finish and quad terminal position makes it ideal for surface mount designs in industrial settings.
DIFFERENTIAL MULTIPLEXER
S-PQCC-J28
11.5062 mm
-10.8 V
22.5 ohm
450 ohm
QCCJ
LDCC28,.5SQ
CHIP CARRIER
12/15,GND/-12/-15
4.51 mm
.02 A
1.5 mA
10.8 V
300 ns
J BEND
11.506 mm
ADG507AKRZ
ADG507AKRZ by Analog Devices is a CMOS differential multiplexer with 8 channels. It has a max on-state resistance of 450 ohm and operates at an industrial temperature grade of -40 to 85 °C. This multiplexer is commonly used in applications requiring signal switching and isolation.
17.9 mm
SOP28,.4
ADG507AKRZ-REEL
ADG507AKRZ-REEL by Analog Devices is a CMOS differential multiplexer with 8 channels. It has a max supply voltage of 16.5V and a nominal off-state isolation of 68dB. This multiplexer is commonly used in industrial applications requiring high signal current and precise resistance matching.
14 ohm
ADG508FBRNZ-REEL7
ADG508FBRNZ-REEL7 by Analog Devices is a single-ended multiplexer with 8 channels. It has a max on-state resistance of 390 ohm and operates at temperatures ranging from -40 to 85 °C. This multiplexer is commonly used in industrial applications requiring signal switching and isolation.
ACTIVE OVERVOLTAGE PROTECTION
8.1 ohm
390 ohm
.2 mA
ADG511BRZ
ADG511BRZ by Analog Devices is a 4-function multiplexer with a max on-state resistance of 50 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a switching time of 375 ns. Ideal for applications requiring high-speed signal routing in compact designs.
50 ohm
3.3/+-5
MIL-STD-883
375 ns
ADG511BRZ-REEL
ADG511BRZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 50 ohm on-state resistance. It operates at -40 to 85 °C and has a small outline package suitable for industrial applications requiring separate outputs and break-before-make switching.
ADG513BRZ
ADG513BRZ by Analog Devices is a 4-function multiplexer with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a max on-state resistance of 50 ohms, switching time of 375ns, and off-state isolation of 68dB. This CMOS technology switch has a small outline package style and operates in temperatures ranging from -40°C to 85°C.
3.3/5/+-5
ADG513BRZ-REEL
ADG513BRZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 50 ohm and switching voltage of BREAK-BEFORE-MAKE. Ideal for industrial applications requiring CMOS technology and separate output voltages up to ±5V.
ADG604YRUZ-REEL
ADG604YRUZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 2.7V to 5.5V and offers a max on-state resistance of 115 ohm. Ideal for automotive applications, this switch has a fast switch-on time of 105 ns and off-state isolation of 75 dB.
-2.7 V
75 dB
115 ohm
3/5/+-5
.001 mA
2.7 V
45 ns
105 ns
AUTOMOTIVE
ADG609BRUZ
ADG609BRUZ by Analog Devices is a 16-terminal differential multiplexer with a max on-state resistance of 30 ohm and switching voltage of BREAK-BEFORE-MAKE. It operates in industrial temperature grades, suitable for applications requiring high isolation and low on-state resistance such as signal routing in electronic systems.
OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
85 dB
30 ohm
75 ns
BICMOS
ADG609BRZ
ADG609BRZ by Analog Devices is a 16-terminal BICMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 30 ohm. Ideal for industrial applications requiring fast switching times and high off-state isolation levels.
.002 mA
ADG611YRUZ-REEL
ADG611YRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching time of 260 ns. Ideal for automotive applications due to its small size, low power consumption, and high isolation level.
.01 A
65 ns
260 ns
ADG613YRUZ
ADG613YRUZ by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching voltage of 5.5 V, suitable for automotive applications requiring high isolation and low signal current.
ADG613YRUZ-REEL
ADG613YRUZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching voltage of 5 V, suitable for automotive applications requiring precise signal routing in compact spaces.
ADG623BRMZ
ADG623BRMZ by Analog Devices is a dual SPST multiplexer with 10 terminals, operating at -40 to 85°C. It has a max on-state resistance of 5.5 ohm and switching time of 120 ns, suitable for industrial applications requiring precise signal routing in compact spaces. With a small outline package and low power consumption, it offers reliable performance in various electronic systems.
CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
S-PDSO-G10
.25 ohm
5.5 ohm
TSSOP10,.19,20
5/+-5
70 ns
120 ns
ADG702BRTZ-REEL
ADG702BRTZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 5 ohm and off-state isolation of 55 dB. Ideal for industrial applications requiring fast switching times and low profile design.
TSOP6,.11,37
ADG709CRUZ-REEL
ADG709CRUZ-REEL by Analog Devices is a 16-terminal CMOS differential multiplexer with 4 channels. It operates at temperatures from -40 to 85 °C, with a max on-state resistance of 4.5 ohm and switching voltage of 3/5V. Ideal for industrial applications requiring precise signal routing in compact spaces.
ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY
-2.75 V
-2.25 V
-2.5 V
60 dB
.4 ohm
4.5 ohm
3/5/+-3
25 ns
ADG711BRZ
ADG711BRZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 1.8-5.5V supply voltage range. It offers low on-state resistance of 8 ohm, fast switching times (20ns on, 12ns off), and high isolation (58dB). Ideal for industrial applications requiring precise signal routing in compact designs.
CAN ALSO OPERATE WITH 5 V SUPPLY
58 dB
.1 ohm
8 ohm
12 ns
ADG713BRZ
ADG713BRZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and a max on-state resistance of 8 ohm. It operates at temperatures from -40 to 85 °C and has a nominal voltage of 3V. Ideal for industrial applications requiring high isolation and fast switching times.
ADG713BRZ-REEL
ADG713BRZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 3V nominal voltage. It operates in industrial temperature range (-40 to 85°C) and has a max on-state resistance of 8 ohm. Ideal for applications requiring fast switching times (20ns on, 12ns off) and high isolation (58dB).
ADG713BRZ-REEL7
ADG713BRZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 1.8V to 5.5V supply voltage range. With -40 to 85°C operating temperature, it's ideal for industrial applications requiring fast switching (20ns on, 12ns off) and high isolation (58dB).
ADG742BKSZ-REEL
ADG742BKSZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 5 ohm, switching time of 20 ns, and off-state isolation of 55 dB. Ideal for industrial applications requiring fast and reliable signal routing in compact spaces.
CAN ALSO OPERATE WITH 5 VOLT SUPPLY
e4
NICKEL PALLADIUM GOLD
© 2023 All rights reserved
