Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG836YRMZ by Analog Devices is a CMOS SPDT switch with 2 channels, 1.8/3.3V power supplies, and 1.4 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, wide temperature range (-40 to 125°C), and high isolation (67 dB).
Median Price
$4.430
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.923
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.230
Rochester
$2.360
$2.220
$2.010
DigiKey
$2.801
$2.507
$2.433
Mouser Electronics
$2.800
$2.380
$2.320
Newark
$4.560
$2.880
$2.660
Farnell
$5.350
$3.100
$2.640
Analog Devices Inc
$5.880
$2.748
$2.225
Element14
$8.580
$4.010
$3.330
Verical
Greenchips
$2.073
$1.974
$1.880
$1.697
Digiode
$2.118
Component Electronics Inc.
$3.850
$2.500
Chip Stock
Vyrian
Touchstone Systems
ComSIT Distribution GmbH
SIE Connect GmbH - GreenChips
Martec Srl
Corphita
$2.007
Parana Technologies
$2.154
$2.003
IDEA Electronic Components Group
$2.316
$2.200
DigiPath Technology Company
$3.613
$3.468
Continental Prestige Electronics
$3.860
$2.850
$2.060
Native Components
$86.110
$82.666
Northwest PG Solutions
$94.721
RC Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Glotronic Ltd.
Kepictronics
Lixinc
GreenTree Electronics
Perfect Parts
Plastic and epoxy materials are lightweight and durable, making this product easy to handle and long-lasting.
Surface mount technology allows for easier and more efficient PCB assembly, saving time and reducing costs.
Having 2 functions allows for versatile use and flexibility in a variety of applications.
Operates at a low voltage which can help in reducing power consumption and heat dissipation.
Capable of operating at very low temperatures, making it suitable for a wide range of environments.
Fast switch-off time ensures quick and efficient performance, ideal for high-speed applications.
CMOS technology offers low power consumption, high noise immunity, and compatibility with a wide range of voltages.
Multiplexers & Switches ADG836YRMZ attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ADG836YRMZ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ADG8yy Spec Chgs 19/Aug/2020
PCN Assembly/Origin - Alternate Site 22/Mar/2021
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Pro-an Electronic
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Continental Device India
General Instrument
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
B340A-13-F
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CD4066BCN
Harris Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TS3A44159RSVRG4
TS3A44159RSVRG4 by Texas Instruments is a CMOS SPDT switch with 2 functions, 4 channels, and 0.8 ohm max on-state resistance. Operating in industrial temperatures, it has a bandwidth of 35 kHz and nominal off-state isolation of 71 dB. Ideal for applications requiring high-speed switching and low on-state resistance.
MAX4999ETJ+T
Analog Devices
MAX4999ETJ+T by Analog Devices is an 8-channel differential multiplexer with a max on-state resistance of 12 ohm. Operating at a temperature range of -40 to 85 °C, it has a nominal voltage of 3.3 V and offers a nominal off-state isolation of 27 dB. Ideal for industrial applications requiring precise signal switching in compact spaces.
CD4053BE
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4066BE
CD4066BE by Texas Instruments is a CMOS IC with 4 SPST channels, operating at -55 to 125 °C. It has a max on-state resistance of 1300 ohm and can handle a signal current of 0.025 A. Ideal for applications requiring low power consumption and high bandwidth up to 40 kHz.
CD74HC4051E
Thomson Consumer Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4052DB,118
NXP Semiconductors
NXP Semiconductors' 74HC4052DB,118 is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 1V to 5V and offers a max on-state resistance of 195 ohm. Ideal for automotive applications, this small-outline switch has a fast switching time of 69 ns and high off-state isolation of 50 dB.
ADG419BRZ
ADG419BRZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of +/-15 V. Ideal for applications requiring high off-state isolation (80 dB) and fast switching times (160 ns).
STMAV340TTR
STMAV340TTR by STMicroelectronics is a 16-terminal CMOS audio/video switch with 2 functions. It operates at industrial temperatures (-40 to 85 °C) and has a max supply voltage of 5.5 V. Ideal for applications requiring separate output channels, it features a low on-state resistance of 10 ohm and fast switching times (5.1 ns on, 5.2 ns off).
ADG1436YRUZ
ADG1436YRUZ by Analog Devices is a 16-terminal SPDT multiplexer with 2 functions. Operating at -40 to 125 °C, it has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching times and high isolation levels.
DG407DYZ-T
DIFFERENTIAL MULTIPLEXER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30;
MPC508AU/1K
The Texas Instruments MPC508AU/1K is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of +-15V and has a max on-state resistance of 1500 ohm. This industrial-grade device, with its small outline package style, is commonly used in applications requiring signal switching and isolation.
DG409DYZ
Renesas Electronics
Renesas Electronics DG409DYZ is a 16-terminal CMOS differential multiplexer with 4 channels. It operates b/w -40 to 85°C, with Vsup ranging from -20V to 20V. With a package size of 9.9mm x 3.9mm and terminal pitch of 1.27mm, it's ideal for industrial applications requiring fast switching times and high isolation levels.
TMUX1574DYYR
TMUX1574DYYR by Texas Instruments is a 16-terminal SPDT multiplexer with 4 channels, operating at a supply voltage range of 1.5V to 5.5V. It offers a max on-state resistance of 4.5 ohm and nominal bandwidth of 2000 kHz, suitable for automotive applications due to its temperature grade and small outline package style.
ADG721BRMZ-REEL7
ADG721BRMZ-REEL7 by Analog Devices is a CMOS SPST switch with 2 functions, operating at -40 to 85°C. It has a max on-state resistance of 10 ohm and offers separate outputs. Ideal for industrial applications requiring a compact, low-power solution with high isolation levels.
MC14052BDG
Onsemi
MC14052BDG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact small outline package.
DG469EY-T1-E3
DG469EY-T1-E3 by Vishay Intertechnology is a SPDT multiplexer with a rectangular package and small outline. It has a max on-state resistance of 6 ohm, max switch-on time of 166 ns, and nominal off-state isolation of 57 dB. This multiplexer is commonly used in automotive applications due to its temperature grade and gull wing terminal form.
MUX36S16IRTVR
MUX36S16IRTVR by Texas Instruments is a CMOS single-ended multiplexer with 32 terminals in a square chip carrier package. It operates b/w -40 to 125 °C and has an on-state resistance of 430 ohm. Ideal for automotive applications, it offers a nominal bandwidth of 500 kHz and can handle supply voltages ranging from -18V to +18V.
ADG1611BCPZ-REEL7
ADG1611BCPZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive-grade temperature range (-40 to 125°C) and has separate outputs. Ideal for multiplexing applications due to its fast switching time (493 ns) and break-before-make feature.
SN74LVC1G3157DRLR
SN74LVC1G3157DRLR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and fast switching times of 14 ns turn-on and 7.5 ns turn-off, making it ideal for industrial applications requiring precise signal routing in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADG819BRMZ
ADG819BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB. This CMOS technology-based switch operates at a temperature range from -40 to 125 °C, making it suitable for automotive applications requiring fast switching times and low resistance.
ADG849YKSZ-500RL7
ADG849YKSZ-500RL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.6 ohm and switching time of 15 ns. Ideal for automotive applications requiring high-speed signal routing in compact spaces.
ADG811YRUZ
ADG811YRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 0.72 ohm Ron, and 30 ns switch-on time. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 67 dB isolation level. Package style: small outline, thin profile, shrink pitch.
ADG819BRTZ-500RL7
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG849YKSZ-REEL7
ADG849YKSZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.6 ohm and switching time of 15 ns. Ideal for automotive applications due to its compact size and high isolation capabilities.
ADG858BCPZ-REEL7
ADG858BCPZ-REEL7 by Analog Devices is a CMOS SPDT multiplexer with 4 functions, 2 channels, and a nominal supply voltage of 2.7V. It has a small package size of 2.1mm x 2.1mm and operates in industrial temperature range. Suitable for applications that require fast switching and low on-state resistance.
ADG849YKSZ-REEL
ADG849YKSZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.6 ohm and switching time of 15 ns. Ideal for automotive applications due to its compact size, low power consumption, and high isolation level.
ADG819BRTZ-REEL7
ADG819BRTZ-REEL7 by Analog Devices is a SPDT multiplexer with 1 channel, operating at temperatures from -40 to 125 °C. It has a max on-state resistance of 1.4 ohm and switching voltage of 3/5 V, making it suitable for automotive applications requiring low-profile switches with fast response times.
ADG884BRMZ
ADG884BRMZ by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm Ron, and 60 dB isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and low on-state resistance.
ADG884BRMZ-REEL7
ADG884BRMZ-REEL7 by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm max on-state resistance, and 60 dB nominal off-state isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and high isolation levels.
ADG801BRTZ-500RL7
ADG801BRTZ-500RL7 by Analog Devices is a SPST switch with 0.6 ohm Ron, 55 ns switch-on time, and 61 dB isolation. Ideal for automotive applications due to its CMOS technology, low profile design, and wide operating temperature range from -40 to 125 °C.
ADG819BRTZ-REEL
ADG819BRTZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at a supply voltage range of 1.8V to 5.5V. It offers a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB, making it ideal for automotive applications requiring fast switching times and low power consumption. The switch features a small outline package with dual terminal position and Gull Wing form, suitable for surface mount PCB designs in temperature-sensitive environments.
ADG884BRMZ-REEL
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG804YRMZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG839YKSZ-REEL7
ADG839YKSZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.5 ohm and switching time of 18 ns. Ideal for automotive applications due to its compact size, low power consumption, and high isolation level.
ADG802BRTZ-REEL7
ADG802BRTZ-REEL7 by Analog Devices is a CMOS SPST switch with 6 terminals, 0.6 ohm Ron, and 55 ns switch-on time. Ideal for automotive applications due to its low profile design, -40 to 125 °C operating temperature range, and 61 dB isolation.
ADG804YRMZ-REEL7
ADG804YRMZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.65V to 3.6V and offers a max on-state resistance of 0.77 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and high isolation levels.
ADG888YRUZ
DPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG821BRMZ
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG804YRMZ-REEL
ADG804YRMZ-REEL by Analog Devices is a CMOS multiplexer with 4 channels, 0.77 ohm max resistance, and 30 ns switch-on time. Ideal for automotive applications due to its small outline package and low power consumption of 0.004 mA at 2.5 V supply voltage.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved