Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's DG419DY-T1 is a SPDT CMOS switch with 35 ohm Ron, suitable for industrial applications. It operates at -40 to 85 °C and has a peak reflow temp of 240 C. With a small outline package style, it features dual terminals and break-before-make switching for precise signal routing in compact designs.
Median Price
$1.540
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
DF Sales Co.
1+ parts
$1.100
100+ parts
-
1k+ parts
10k+ parts
Component Electronics Inc.
$1.150
$1.000
Bristol Electronics
$1.875
$0.694
$0.487
TEDSS.com
$2.600
$1.490
Chip Stock
Microfarads
Connector Distribution Corp
Right Parts Inc.
Dan-Mar Components
PC Components Company LLC
Vyrian
Halfin
Corel Iberica Componentes, S.L.
Inventory MP
Nova Conductors
ACDS - Activité Composants Distribution Service
Advanced Electronics
$3.861
$3.668
Ampacity Inc.
$6.500
Semicontronic
$7.500
$7.312
$7.275
Aztec Data Supply Inc.
$10.598
AZTECH Wire
$13.731
Corohmni
$24.028
Authorized Procurement Solutions
Futuretech Components
Continental Prestige Electronics
Kepictronics
Argo Parts USA
Assy Fe
Bastille Electronics
This material provides durability and reliability to the product, making it suitable for various applications.
Allows for easy and convenient installation on printed circuit boards, saving space and simplifying the assembly process.
Suitable for applications requiring a 15V supply voltage, providing compatibility with a wide range of systems.
Can withstand high temperatures, ensuring stable performance in demanding environments.
CMOS technology offers low power consumption and high noise immunity, making the product energy-efficient and reliable.
Multiplexers & Switches DG419DY-T1 attributes and parameters. Explore more Multiplexers & Switches devices from Vishay Intertechnology
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Nominal Negative Supply Voltage (Vsup):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
DG419DY-T1 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Diotec Semiconductor Ag
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
International Semiconductor
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Central Semiconductor
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
PCA9546APWRG4
PCA9546APWRG4 by Texas Instruments is a 16-terminal multiplexer with 4 channels. It operates b/w -40 to 85°C, with a supply voltage range of 2.3V to 5.5V. Ideal for applications requiring separate outputs and low on-state resistance.
MAX14866UTM+
Analog Devices
MAX14866UTM+ by Analog Devices is a 48-terminal SPST switch with 1.8V nominal voltage and 13 ohm max on-state resistance. It operates b/w 0-85°C, has a peak reflow temp of 260°C, and offers 75dB off-state isolation. Ideal for applications requiring high-speed switching in compact designs.
MAX333ACPP+
MAX333ACPP+ by Analog Devices is a CMOS SPDT multiplexer with 4 functions, operating at -20V to 20V. It has a max on-state resistance of 45 ohm and offers 72dB off-state isolation. Ideal for commercial applications requiring fast switching times and precise signal routing in a compact IN-LINE package.
DG442DY+
Maxim Integrated
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1434YRUZ-REEL
ADG1434YRUZ-REEL by Analog Devices is a CMOS SPDT multiplexer with 4 channels. It operates at a nominal voltage of +-5V and has a max on-state resistance of 9 ohm. This multiplexer is commonly used in automotive applications due to its small size and high temperature tolerance.
MAX14662ETI+
MAX14662ETI+ by Analog Devices is a 28-terminal SPST multiplexer with a 1 ohm Ron, suitable for industrial applications. It operates b/w -40 to 85 °C with Vsup ranging from 1.6V to 5.5V. With a 0.4mm terminal pitch and 0.8mm seated height, it offers high isolation of 40dB and low on-state resistance match of 0.02 ohm.
TS5A3159DBVRE4
TS5A3159DBVRE4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 3.2 ohm and fast switching times of 70-95 ns. Ideal for industrial applications requiring high isolation and low power consumption.
MAX4634EUB+T
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
MAX14757EUE+T
MAX14757EUE+T by Analog Devices is a 4-function multiplexer with 16 terminals, operating b/w -40 to 85°C. It features a BICMOS technology, matte tin terminal finish, and a max on-state resistance of 10 ohm. Ideal for industrial applications requiring precise signal switching in compact designs.
DG412DYZ
Intersil
CD4052BE
CD4052BE by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at -55 to 125 °C, with a supply voltage range of 3-20 V. With a max on-state resistance of 1050 ohm and switching time of 720 ns, it's ideal for military-grade applications requiring high isolation and low signal current.
TS5A23157RSERG4
TS5A23157RSERG4 by Texas Instruments is a 2-function SPDT switch with 140 ohm Ron, suitable for industrial applications. Operating at -40 to 85 °C, it has a 0.6 mm seated height and offers 60 dB isolation. With a terminal pitch of 0.5 mm and package style of CHIP CARRIER, it's ideal for compact designs requiring fast switching times.
SN74LVC1G3157YZPR
SN74LVC1G3157YZPR by Texas Instruments is a SPDT switch with 1 channel, 30 ohm Ron, and 340 kHz bandwidth. It operates at -40 to 85 °C and has a very thin profile package style. Ideal for industrial applications requiring low on-state resistance and high isolation levels.
MC74HC4052ADG
MC74HC4052ADG by Onsemi is a 16-terminal CMOS multiplexer with 4 channels. It operates b/w -55 to 125 °C, with a max supply voltage of 6V and on-state resistance of 170 ohm. Ideal for military-grade applications requiring precise signal switching in compact spaces.
NLAS4599DTT1G
NLAS4599DTT1G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and nominal off-state isolation of 93 dB. Ideal for military-grade applications requiring fast switching times and low resistance in a compact package.
TS5A23159DGSTE4
TS5A23159DGSTE4 by Texas Instruments is a 2-channel SPDT switch with 1.8/5 V supplies, 3.5 ohm Ron, and 105 kHz bandwidth. Ideal for industrial applications requiring separate outputs and high isolation levels in a compact thin profile package.
MAX313FESE
MAX313FESE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm, switching time of 225 ns, and industrial temperature grade. Ideal for applications requiring high-speed signal routing in compact designs.
74HC4051DB,112
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA4480UCX
FSA4480UCX by Onsemi is a 25-terminal audio/video switch with a supply voltage range of 2.7V to 5.5V, operating temperature from -40°C to 85°C, and peak reflow temperature of 260°C. It features a very thin profile package style suitable for industrial applications requiring surface mount technology in compact spaces.
ADG439FBRZ
ADG439FBRZ by Analog Devices is a CMOS differential multiplexer with 4 channels, -40 to 125 °C operating temp, and 270 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, low supply current (0.2 mA), and high off-state isolation (93 dB).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DG419DY-T1-E3
Vishay Intertechnology
Vishay Intertechnology's DG419DY-T1-E3 is a SPDT switch with 35 ohm Ron, 250 ns switch-on time, and -40 to 85 °C operating temp. Ideal for industrial applications requiring fast switching and low on-state resistance in compact designs. With a small outline package and dual terminals, it suits various multiplexing needs.
DG411DY-T1-E3
Vishay Intertechnology's DG411DY-T1-E3 is a CMOS SPST multiplexer with 4 functions, 35 ohm Ron, and 220 ns switch-on time. Ideal for industrial applications requiring separate output voltages up to +-15 V, it operates b/w -40 to 85 °C with a max seated height of 1.75 mm.
DG419DY-E3
Vishay Intertechnology's DG419DY-E3 is a SPDT switch with 35 ohm Ron, 250 ns max switch-on time, and -40 to 85°C operating temp. Ideal for industrial applications requiring fast switching at +/-15 V supplies in a compact SMD package.
DG411DYZ-T
Renesas Electronics
Renesas Electronics' DG411DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. It operates in industrial temperatures from -40 to 85 °C and has a small outline package for applications requiring high isolation at nominal voltage of +/-15 V.
Rochester Electronics
The Renesas Electronics DG412DYZ is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for various applications requiring signal switching in electronic circuits.
DG412DYZ-T
Renesas Electronics' DG412DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
DG411DY-E3
Vishay Intertechnology's DG411DY-E3 is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 220 ns switch-on time. Ideal for industrial applications, it operates b/w -40 to 85°C with a peak reflow temperature of 260°C. This small outline package has separate outputs and offers 68 dB isolation at ±15 V supplies.
DG419DY+
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG419DY
The Vishay Intertechnology DG419DY is a SPDT CMOS switch with 35 ohm Ron. It operates at -40 to 85 °C, with Vsup of +/-15V and 250ns switch-on time. Ideal for industrial applications requiring fast switching in compact designs.
Temic Semiconductors
Siliconix
Analog Devices' DG419DY+ is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm and switching voltage of +-15V. Ideal for industrial applications, it operates b/w -40 to 85°C, has a peak reflow temp of 260°C, and offers break-before-make switching.
DG412DY-T1-E3
DG412DY-E3
DG419DJ-E3
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved