Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NX3V1G66GM,115
NXP Semiconductors
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSON; Package Shape: SQUARE; Surface Mount: YES;
SPST
S-PDSO-N6
e3
1.45 mm
1
NO
2
6
90 dB
.8 ohm
125 Cel
-40 Cel
PLASTIC/EPOXY
VSON
SOLCC6,.04,20
SQUARE
SMALL OUTLINE, VERY THIN PROFILE
260
1.5/3.3
Not Qualified
.5 mm
Multiplexer or Switches
3.6 V
1.4 V
1.65 V
YES
26 ns
49 ns
BREAK-BEFORE-MAKE
CMOS
AUTOMOTIVE
Tin (Sn)
NO LEAD
DUAL
30
1 mm
NX3V1G66GM,132
NX3V1T66GM,132
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-N6
RECTANGULAR
90 ns
57 ns
7SB3257DFT2G
Onsemi
The Onsemi 7SB3257DFT2G is a small outline, thin profile multiplexer with 2 channels. It operates b/w -55 to 125 °C and has a max on-state resistance of 15 ohm. Ideal for military-grade applications requiring fast switching times in compact spaces.
SINGLE-ENDED MULTIPLEXER
R-PDSO-G6
2 mm
15 ohm
-55 Cel
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
5.5 V
4 V
4.5 V
4.8 ns
4.6 ns
MILITARY
MATTE TIN
GULL WING
.65 mm
1.25 mm
7SB3257MUTCG
7SB3257MUTCG by Onsemi is a dual single-ended multiplexer with 2 channels. It operates b/w -55 to 125 °C, with Vsup ranging from 4-5.5V. Featuring a low Ron of 15 ohm, it has fast switch-on/off times of 4.6/4.8 ns, making it ideal for military-grade applications in small outline packages.
e4
1.2 mm
NOT SPECIFIED
.55 mm
Nickel/Palladium/Gold (Ni/Pd/Au)
.4 mm
74LVC1G3157DBVRG4
Texas Instruments
74LVC1G3157DBVRG4 by Texas Instruments is a SPDT multiplexer/switch with a supply voltage range of 1.65V to 5.5V and a max on-state resistance of 30 ohm. It is commonly used in industrial applications due to its small size, low power consumption, and high temperature tolerance (up to 85°C).
SPDT
340 kHz
2.9 mm
NC
57 dB
.1 ohm
30 ohm
85 Cel
COMMON OUTPUT
LSSOP
TSOP6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
3.3
Multiplexers or Switches
.035 mA
2.3 V
7.5 ns
14 ns
INDUSTRIAL
.95 mm
1.6 mm
NLAS5113DFT2G
NLAS5113DFT2G by Onsemi is a SPST switch with 6 terminals, operating b/w -40 to 85 °C. It has a low on-state resistance of 1.3 ohm and supports Vsup from 1.65V to 4.5V. Ideal for industrial applications requiring compact, surface-mount switches with precise voltage control.
.4 ohm
1.3 ohm
TSSOP6,.08
4.2 V
TIN
NLAS5113MUTBG
NLAS5113MUTBG by Onsemi is a SPST switch with 6 terminals, Vsup ranging from 1.65V to 4.5V, and Ron of 1.3 ohm. It operates in industrial temperature range (-40 to 85 °C) and is ideal for applications requiring a small outline, very thin profile package shape multiplexer & switches with surface mount capability.
R-XDSO-N6
UNSPECIFIED
SOLCC6,.04,16
NICKEL PALLADIUM GOLD
TS5A3157DBVRG4
TS5A3157DBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 160 ohm and offers high isolation of 65 dB. Ideal for industrial applications requiring fast switching with a bandwidth of 300 kHz.
VIDEO APPLICATION
300 kHz
0 V
65 dB
.5 ohm
160 ohm
SEPARATE OUTPUT
2/5
.01 mA
1.8 V
24 ns
TS5A3159ADBVRG4
TS5A3159ADBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 2.5 ohm and fast switching times of 75 ns on and 50 ns off. Ideal for industrial applications requiring high isolation and low power consumption.
100 kHz
64 dB
.15 ohm
2.5 ohm
1.8/5
.0001 mA
1.95 V
50 ns
75 ns
TS5A4624DCKTG4
TS5A4624DCKTG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 3.3 ohm and nominal bandwidth of 90 kHz. Ideal for industrial applications requiring common output switching with low power consumption.
90 kHz
6.5 V
63 dB
3.3 ohm
.0012 mA
15 ns
70 ns
TS5A63157DBVRG4
TS5A63157DBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 45 ohm and offers high isolation of 60 dB. Ideal for industrial applications requiring fast switching with a bandwidth of 371 kHz.
371 kHz
60 dB
45 ohm
.00075 mA
12 ns
STG4158BJR
STMicroelectronics
STG4158BJR by STMicroelectronics is a CMOS SPDT switch with a max on-state resistance of 3Ω and operates b/w 1.65V to 4.5V. It features a very thin profile, ideal for compact applications. With an operating temp range of -40 °C to 85 °C, it's suited for industrial use.
R-PBGA-B6
1.228 mm
76 dB
.04 ohm
3 ohm
VFBGA
BGA6,2X3,16
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
1.8/4.5
.655 mm
20 ns
160 ns
BALL
BOTTOM
.828 mm
ADG1202BRJZ-REEL7
Analog Devices
ADG1202BRJZ-REEL7 by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 625 ohm and switching voltage of 12V. Ideal for automotive applications due to its thin profile package and nickel palladium gold finish.
625 ohm
TSOP
SMALL OUTLINE, THIN PROFILE
12/+-15
250 ns
STG5123DTR
STG5123DTR by STMicroelectronics is a SPDT switch with 1.8/4V supplies, 3 ohm Ron, and 40ns switch-on time. It's a CMOS technology IC suitable for industrial applications requiring fast switching and high isolation levels in compact designs.
75 dB
.06 ohm
1.8/4
40 ns
TS5A9411DCKTG4
TS5A9411DCKTG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 28 ohm, switching time of 20 ns, and nominal bandwidth of 100 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
NO/NC
84 dB
28 ohm
2.5/5
.0005 mA
2.25 V
2.5 V
9.5 ns
NLAST4599DFT2
NLAST4599DFT2 by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125 °C. It has a supply voltage range of 2-5.5 V and offers fast switching times of 25 ns on and 15 ns off. Ideal for military-grade applications requiring compact size and low power consumption.
e0
93 dB
55 ohm
235
.002 mA
2 V
3 V
25 ns
Tin/Lead (Sn/Pb)
NLAS4599DFT2
NLAS4599DFT2 by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and offers 93 dB off-state isolation. Ideal for military-grade applications requiring fast switching times and low resistance.
40 ohm
2/5.5
30 ns
ADG751ART-REEL7
ADG751ART-REEL7 by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 50 ohm and fast switching times of 19 ns turn-on and 6 ns turn-off. Ideal for industrial applications requiring separate output control in compact designs.
SINGLE T-SWITCH
50 ohm
240
3/5
6 ns
19 ns
TIN LEAD
1.65 mm
ADG751BRT-REEL7
ADG751BRT-REEL7 by Analog Devices is a CMOS SPST switch with 6 terminals, 90 ohm Ron, and 75 dB isolation. It operates b/w -40 to 85°C, ideal for industrial applications requiring separate output switching at Vsup of 1.8-5.5V. The small outline package with low profile design makes it suitable for space-constrained PCBs.
90 ohm
ADG752BRT-REEL7
ADG752BRT-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a low profile package style, 1.45 mm seated height, and 50 ohm max on-state resistance. Ideal for industrial applications requiring common output switching with 3/5 V supplies.
CAN ALSO BE OPERATED FROM 4.5 TO 5.5V
80 dB
.2 ohm
8 ns
18 ns
ADG719BRT-REEL
ADG719BRT-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and switching time of 15 ns, suitable for automotive applications requiring fast and efficient signal routing in compact spaces.
67 dB
12 ohm
ADG751ART-REEL
ADG751ART-REEL by Analog Devices is a CMOS SPST switch with 50 ohm Ron, 19 ns switch-on time, and 65 dB isolation. Ideal for industrial applications requiring separate output signals in a compact package with low profile design. Operates b/w -40 to 85 °C with a supply voltage range of 1.8V to 5.5V.
ADG751BRT-REEL
ADG751BRT-REEL by Analog Devices is a SPST switch with 6 terminals, operating at temperatures from -40 to 85 °C. With a max on-state resistance of 90 ohms and switching time of 19 ns, it's ideal for industrial applications requiring separate outputs and low-profile packaging. This CMOS technology device has a nominal voltage of 3V and offers high off-state isolation of 75 dB.
ADG752BRT-REEL
ADG752BRT-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a low profile package style, tin lead finish, and 3/5V power supplies. Ideal for industrial applications requiring common output switching with fast response times of 8-18ns.
ADG801BRT-REEL7
ADG801BRT-REEL7 by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 125 °C. It has a low on-state resistance of 0.6 ohm and fast switching times of 55 ns on and 15 ns off. Ideal for automotive applications due to its small size, low profile, and high isolation of 61 dB.
61 dB
.6 ohm
55 ns
ADG802BRT-REEL7
Analog Devices' ADG802BRT-REEL7 is a CMOS SPST switch with 6 terminals, operating at -40 to 125 °C. It has a low on-state resistance of 0.6 ohm and fast switching times of 55 ns turn-on and 15 ns turn-off. Ideal for automotive applications due to its small size, low profile, and high isolation of 61 dB.
ADG819BRT-REEL7
ADG819BRT-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a low on-state resistance of 1.4 ohm and fast switching times of 60 ns on and 16 ns off. Ideal for automotive applications requiring high isolation (71 dB) and break-before-make switching at supply voltages from 1.8V to 5.5V.
71 dB
1.4 ohm
16 ns
60 ns
ADG802BRT-REEL
ADG802BRT-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, 0.6 ohm Ron, and 55 ns switch-on time. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage range of 1.8V to 5.5V. The small outline package measures 2.9mm in length and has a low profile design for space-constrained PCBs.
MAX4696EBT-T
Maxim Integrated
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
1.98 mm
35 ohm
BGA6,2X3,20
245
.67 mm
80 ns
1.75 mm
MAX4697EBT-T
MAX4529CUT
AUDIO/VIDEO SWITCH; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AUDIO/VIDEO SWITCH
-6 V
-2.7 V
-5 V
70 ohm
70 Cel
0 Cel
6 V
2.7 V
5 V
100 ns
COMMERCIAL
1.625 mm
FSA1157P6
Fairchild Semiconductor
FSA1157P6 by Fairchild Semiconductor is a SPST switch with 2.1 ohm Ron, 40 ns switch-on time, and 1.65-5.5 V supply voltage range. It is used in industrial applications for signal routing due to its small outline package and CMOS technology.
2.1 ohm
40
NLAST4599DFT2G
NLAST4599DFT2G by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125°C. It has a supply voltage range of 2-5.5V and offers fast switching times of 25ns on and 15ns off. Ideal for military-grade applications requiring high isolation (93dB) in a compact SOT package.
Matte Tin (Sn) - annealed
ADG701BRTZ-REEL
ADG701BRTZ-REEL by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring precise signal routing in compact spaces.
55 dB
5 ohm
13 ns
Matte Tin (Sn)
NLAS4599DFT2G
NLAS4599DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and nominal off-state isolation of 93 dB. Ideal for military-grade applications requiring fast switching times and low resistance.
ADG702BRTZ-REEL
ADG702BRTZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 5 ohm and off-state isolation of 55 dB. Ideal for industrial applications requiring fast switching times and low profile design.
ADG742BKSZ-REEL
ADG742BKSZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 5 ohm, switching time of 20 ns, and off-state isolation of 55 dB. Ideal for industrial applications requiring fast and reliable signal routing in compact spaces.
CAN ALSO OPERATE WITH 5 VOLT SUPPLY
DG9431DV-T1-E3
Vishay Intertechnology
Vishay Intertechnology's DG9431DV-T1-E3 is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 74 dB. Ideal for industrial applications requiring fast switching times and low power consumption.
3.05 mm
74 dB
12 V
120 ns
NLAS4599DTT1G
NLAS4599DTT1G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and nominal off-state isolation of 93 dB. Ideal for military-grade applications requiring fast switching times and low resistance in a compact package.
3 mm
1.5 mm
NLVAS4599DFT2G
NLVAS4599DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a supply voltage range of 2-5.5 V and offers 93 dB isolation. Ideal for military-grade applications requiring fast switching times (30 ns on, 15 ns off) in compact spaces due to its small outline package style.
ADG802BRTZ-REEL
ADG802BRTZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, 0.6 ohm Ron, and 61 dB isolation. It operates at -40 to 125 °C and has a peak reflow temp of 260 °C. Ideal for automotive applications due to its low profile design and fast switching times.
ADG741BKS-R2
ADG741BKS-R2 by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 5 ohm and off-state isolation of 55 dB. Ideal for industrial applications requiring fast switching times and low power consumption.
ADG742BKSZ-R2
ADG742BKSZ-R2 by Analog Devices is a CMOS SPST switch with 6 terminals, operating at temperatures from -40 to 85 °C. It has a max on-state resistance of 5 ohm and a switching time of 20 ns, making it ideal for industrial applications requiring fast and efficient signal routing in compact spaces.
ADG841YKSZ-REEL
ADG841YKSZ-REEL by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 125 °C. It has a low 0.35 ohm on-state resistance, fast switching times of 16.5 ns on and 8.2 ns off, suitable for automotive applications due to its CMOS technology and high isolation of 54 dB.
54 dB
.35 ohm
1.8/3.3
8.2 ns
16.5 ns
ADG842YKSZ-REEL
ADG842YKSZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, 0.35 ohm Ron, and 54 dB isolation. It operates at -40 to 125 °C and supports Vsup from 1.65V to 3.6V. Ideal for automotive applications due to its small size, low power consumption, and fast switching times.
ADG602BRTZ-REEL
ADG602BRTZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a low profile package style, 2.5 ohm Ron, and 60 dB isolation. Ideal for industrial applications requiring fast switching times and high reliability in a compact form factor.
CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
-5.5 V
5/+-5
74LVC1G3157DBVRE4
74LVC1G3157DBVRE4 by Texas Instruments is a SPDT switch with 6 terminals, operating at a supply voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and fast switching times of 14 ns turn-on and 7.5 ns turn-off, suitable for industrial applications requiring high-speed signal routing in compact designs.
© 2023 All rights reserved
