Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
WR222230-26M8-G
TDK
The TDK WR222230-26M8-G is a 27uH general purpose inductor with 1.1 ohm DC resistance. Featuring radial terminal placement, it has a circular package shape and operates b/w -30°C to 70°C. Ideal for applications requiring fixed inductors at 0.1 MHz test frequency.
General Purpose Inductor
27 μH
1.1 Ω
1
100 kHz
Circular Package
1.142 in (29 mm)
Circular
No
-30 °C (-22 °F)
70 °C (158 °F)
Radial
Wire
2
0.034 in (0.87 mm)
0.866 in (22 mm)
744750530047
Wurth Elektronik
Wurth Elektronik 744750530047 is a shielded fixed inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 11.8A and operates b/w -40 to 125°C, making it ideal for general purpose use. With radial terminal placement and cylindrical construction, this inductor offers low DC resistance of 0.0048 ohm.
Power Inductor
4.7 μH
11.8 A
4.8 mΩ
20 %
Cylindrical Package
0.043 in (1.1 mm)
0.197 in (5 mm)
0.472 in (12 mm)
Yes
Cylindrical
-40 °C (-40 °F)
125 °C (257 °F)
0.433 in (11 mm)
0.583 in (14.8 mm)
744750530068
744750530068 by Wurth Elektronik is a shielded fixed inductor with a lead diameter of 1 mm and lead spacing of 12 mm. It has a nominal inductance of 6.8 uH and is suitable for power applications.
6.8 μH
10.7 A
6.5 mΩ
0.039 in (1 mm)
744750530100
Wurth Elektronik 744750530100 is a shielded power inductor with 10uH nominal inductance, 8.9A max current, and 0.0095 ohm DC resistance. Ideal for general purpose applications, this radial inductor has a cylindrical package with 12mm lead spacing and operates b/w -40 to 125°C.
10 μH
8.9 A
9.5 mΩ
0.035 in (0.9 mm)
PCB Mount
SPM3012T-R47M-LR
The TDK SPM3012T-R47M-LR is a shielded, dual-ended fixed inductor with 0.47uH nominal inductance. Ideal for power applications, it has a max rated current of 4.5A and operates b/w -40 to 125°C.
470 nH
4.5 A
34.8 mΩ
Rectangular Package
1312
Rectangular
Metal
Dual Ended
L Bend
SMT
0.126 in (3.2 mm)
0.047 in (1.2 mm)
0.118 in (3 mm)
Tape and Reel, Embossed Plastic, 7 in
SPM4012T-2R2M-LR
TDK's SPM4012T-2R2M-LR is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 3.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a compact rectangular package (4.4mm x 4.1mm x 1.2mm) suitable for general purpose use.
2.2 μH
3.1 A
85.5 mΩ
1716
0.173 in (4.4 mm)
0.161 in (4.1 mm)
SPM4020T-1R5M-LR
SPM4020T-1R5M-LR by TDK is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 4.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a compact rectangular package measuring 4.4mm x 4.1mm x 2mm.
1.5 μH
4.7 A
40 mΩ
0.079 in (2 mm)
SPM5020T-4R7M-LR
SPM5020T-4R7M-LR by TDK is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 3.7A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package measuring 5.4mm x 5.1mm x 2mm and operates b/w -40°C to 125°C temperature range.
3.7 A
67.7 mΩ
2120
0.213 in (5.4 mm)
0.201 in (5.1 mm)
74437358010
74437358010 by Wurth Elektronik is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 1 uH and can handle a max rated current of 14 A. This general purpose inductor is suitable for power applications and has a max operating temperature of 125 °C.
1 μH
14 A
4.63 mΩ
42 MHz
Inductance is measured at 10 mA
3833
Powdered Iron
J Bend
0.382 in (9.7 mm)
0.157 in (4 mm)
0.335 in (8.5 mm)
Tape and Reel, Embossed Plastic, 13 in
74479887210C
Wurth Elektronik 74479887210C is a shielded SMT inductor with 1uH nominal inductance, 2.5A max current, and 60MHz self-resonance freq. Ideal for power applications due to its high quality factor and dual-ended terminal placement. Operating temp range from -40°C to 125°C makes it suitable for various electronic devices.
2.5 A
17
68.75 Ω
60 MHz
1 MHz
1008
Wraparound
0.098 in (2.5 mm)
LQP03TQ2N0C02D
Murata Manufacturing
Murata Manufacturing's LQP03TQ2N0C02D is a 0201 SMT RF inductor with 0.002 uH nominal inductance, 12500 MHz self-resonance frequency, and 0.65 A max rated current. Ideal for general purpose applications, this dual-ended inductor operates b/w -55 to 125 °C with a min quality factor of 17.
RF Inductor
2 nH
650 mA
100 mΩ
10 %
12500 MHz
500 MHz
0201
-55 °C (-67 °F)
0.024 in (0.6 mm)
0.012 in (0.3 mm)
Tape and Reel, Paper, 7 in
1255AY-2R2N=P3
Murata Manufacturing's 1255AY-2R2N=P3 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 4.7A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.0192 ohm and operates b/w -40 to 85 °C.
19.2 mΩ
30 %
DC Resistance measured at 20% Tolerance
2424
Ferrite
85 °C (185 °F)
0.236 in (6 mm)
0.177 in (4.5 mm)
Tape and Reel, Embossed, 13 in
1255AY-470M=P3
Murata Manufacturing's 1255AY-470M=P3 is a shielded fixed inductor with 47uH nominal inductance, 0.252 ohm DC resistance, and 1.3A max rated current. It is a power inductor suitable for general purpose applications due to its ferrite core material and dual-ended terminal placement.
47 μH
1.3 A
252 mΩ
LQP03TQ3N6B02D
LQP03TQ3N6B02D by Murata is a surface mount fixed inductor with 0.0036 uH nominal inductance, 8000 MHz self-resonance frequency, and 125 °C max operating temperature. It is designed for RF applications due to its high quality factor and dual-ended terminal placement.
3.6 nH
400 mA
250 mΩ
2.78 %
8000 MHz
MAKK2016HR24M
Taiyo Yuden
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
240 nH
4 A
26 mΩ
2 MHz
0806
Matte Tin
0.063 in (1.6 mm)
Tape and Reel, Embossed, 7 in
e3
LQH3NPN1R0MMEL
Murata Manufacturing's LQH3NPN1R0MMEL is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C with a self-resonance frequency of 100MHz.
3 A
30 mΩ
100 MHz
1212
0.055 in (1.4 mm)
LQH3NPZ101MMEL
Murata Manufacturing's LQH3NPZ101MMEL is a shielded, surface mount fixed inductor with 100uH nominal inductance. Ideal for RF applications, it has a max operating temperature of 125°C and self-resonance frequency of 3MHz. This general purpose inductor features dual-ended terminals and ferrite core material.
100 μH
430 mA
1.908 Ω
3 MHz
AEC-Q200
LQH3NPZ470MMEL
Murata Manufacturing's LQH3NPZ470MMEL is a shielded SMT inductor with 47uH nominal inductance, 0.984 ohm DC resistance, and 5 MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor operates b/w -40 to 125 °C with a max current of 0.61 A.
610 mA
984 mΩ
5 MHz
LQH3NPZ6R8MMEL
Murata Manufacturing's LQH3NPZ6R8MMEL is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 1.45A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 30MHz and operates b/w -40 to 125 °C temperature range.
1.45 A
168 mΩ
30 MHz
DFE201612R-H-R47M=P2
Murata Manufacturing's DFE201612R-H-R47M=P2 is a shielded, dual-ended fixed inductor with 0.47uH nominal inductance. Ideal for power applications, it has a max rated current of 3.2A and operates b/w -40 to 85°C. Its compact SMT package measures 2mm x 1.6mm x 1.2mm, making it suitable for general purpose inductor needs.
3.2 A
Metal Alloy
760308101208A
760308101208A by Wurth Elektronik is a 18uH RF inductor with 0.65 ohm DC resistance. It has a max rated current of 0.7A and operates b/w -20 to 105 °C. Ideal for wireless applications, it features radial terminal placement and self-resonance frequency of 24 MHz.
18 μH
700 mA
650 mΩ
24 MHz
125 kHz
Disk Package
0.008 in (0.2 mm)
Wireless
-20 °C (-4 °F)
105 °C (221 °F)
Flexible Lead
0.394 in (10 mm)
SRR1050A-R68Y
Bourns
Bourns SRR1050A-R68Y is a shielded, dual-ended fixed inductor with 0.68uH nominal inductance. Ideal for power applications, it has a max rated current of 9.5A and operates b/w -40 to 125°C. Its compact rectangular package measures 10.2mm x 10mm x 4.8mm, making it suitable for various general-purpose inductor needs.
680 nH
9.5 A
5.5 mΩ
110 MHz
4039
Tin Over Nickel
0.402 in (10.2 mm)
0.189 in (4.8 mm)
LQH3NPZ100MGRL
Murata Manufacturing's LQH3NPZ100MGRL is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.12A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and has a self-resonance frequency of 20MHz.
1.12 A
336 mΩ
20 MHz
One Surface
LQH3NPZ330MGRL
Murata Manufacturing's LQH3NPZ330MGRL is a shielded, surface mount fixed inductor with 33uH nominal inductance. Ideal for RF applications, it has a max operating temperature of 125°C and self-resonance frequency of 8MHz.
33 μH
600 mA
1.032 Ω
8 MHz
LQH5BPZ220MT0L
Murata Manufacturing's LQH5BPZ220MT0L is a shielded, surface mount fixed inductor with 22uH nominal inductance and 1.05A max rated current. It is a general purpose inductor suitable for power applications, featuring dual-ended terminals and ferrite core material. Operating temperature ranges from -40 to 125°C with self-resonance frequency of 15MHz.
22 μH
1.05 A
310.8 mΩ
15 MHz
2020
CTX06-14622
Eaton Corporation
CTX06-14622 by Eaton Corp is a fixed inductor with 22uH nominal inductance, 8.5A max current rating, and 0.0117 ohm DC resistance. It's a surface mount quad in-line component suitable for general purpose applications requiring high-frequency performance at 0.26 MHz test frequency.
8.5 A
11.7 mΩ
260 kHz
Quad In-Line
4
74439370047
Wurth Elektronik 74439370047 is a shielded fixed inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 17A and operates b/w -40 to 125°C. The inductor features dual-ended terminals, measures 16.4mm x 15.4mm x 10mm, and complies with AEC-Q200 standards.
17 A
3.1 Ω
16 MHz
DC Resistance is measured at 10% Tolerance, Inductance is measured at 10 mA DC Current
6561
Composite
0.646 in (16.4 mm)
0.606 in (15.4 mm)
CLF10060NIT-221M-D
CLF10060NIT-221M-D by TDK is a shielded, surface mount fixed inductor with 220uH nominal inductance. It has a max rated current of 1.2A and operates b/w -55 to 150°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
220 μH
1.2 A
350 mΩ
DC Resistance is measured at 20% Tolerance
150 °C (302 °F)
0.398 in (10.1 mm)
Tape and Reel, Blister Plastic, 13 in
CLF12577NIT-330M-D
The TDK CLF12577NIT-330M-D is a shielded, dual-ended fixed inductor with 33uH nominal inductance. It has a max rated current of 3.6A and operates b/w -55°C to 150°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals for efficient performance.
3.6 A
52 mΩ
5049
0.504 in (12.8 mm)
0.303 in (7.7 mm)
0.492 in (12.5 mm)
CLF12577NIT-680M-D
The TDK CLF12577NIT-680M-D is a shielded, surface mount fixed inductor with 68uH nominal inductance. It has a max rated current of 2.7A and operates b/w -55 to 150°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
68 μH
2.7 A
90 mΩ
CLF5030NIT-331M-D
The TDK CLF5030NIT-331M-D is a shielded, surface mount fixed inductor with 330uH nominal inductance. It operates b/w -55 to 150 °C and has a max rated current of 0.2A. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
330 μH
200 mA
3.4 Ω
0.209 in (5.3 mm)
0.106 in (2.7 mm)
74439370100
74439370100 by Wurth Elektronik is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 10 uH and can handle a max rated current of 11.5 A. This general purpose inductor is commonly used for power applications.
11.5 A
6.4 mΩ
9 MHz
CLF12577NIT-101M-D
The TDK CLF12577NIT-101M-D is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 2.6A and operates b/w -55 to 150°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
2.6 A
110 mΩ
SL1616A-R10MHF
Inter-technical Group
SL1616A-R10MHF by Inter-technical Group is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.1uH, max rated current of 19A, and operates b/w -55 to 130°C. Ideal for high current applications, this general purpose inductor features ferrite core material and wraparound terminals.
High Current Inductor
100 nH
19 A
320 μΩ
DC Resistance measured at 9% Tolerance
130 °C (266 °F)
AWCCA-30N30H20-C01-B
Abracon
Abracon's AWCCA-30N30H20-C01-B is a shielded RF inductor with 6.3uH nominal inductance, 0.14ohm DC resistance, and 85°C max operating temp. Ideal for chassis mount applications due to circular shape, radial terminal placement, and high quality factor of 26 at L-nom.
6.3 μH
26
140 mΩ
0.787 in (20 mm)
Chassis Mount
1.181 in (30 mm)
Bulk
AWCCA-12R12H11-C01-B
AWCCA-12R12H11-C01-B by Abracon is a shielded RF inductor with 8uH nominal inductance, 0.52 ohm DC resistance, and 10% tolerance. It is a general-purpose inductor suitable for chassis mount applications at temperatures ranging from -25 to 85°C. The radial terminal placement and rectangular package make it ideal for various electronic circuits requiring high-quality factor components.
8 μH
10.1
520 mΩ
0.591 in (15 mm)
-25 °C (-13 °F)
AWCCA-50N50H30-C21-B
Abracon's AWCCA-50N50H30-C21-B is a 6.3uH RF coil inductor with 0.038 ohm DC resistance, suitable for general purpose applications. Featuring radial terminal placement and chassis mount package style, it operates b/w -25°C to 85°C. Its rectangular construction and flexible lead terminals make it ideal for various electronic circuits.
RF Coil
38 mΩ
1.969 in (50 mm)
MBKK1608H1R5M
1 A
200 mΩ
0603
Metal Core
0.031 in (0.8 mm)
74404086332
Wurth Elektronik 74404086332 is a shielded fixed inductor with 3300uH nominal inductance, 0.24A max current, and 0.759MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
3.3 mH
240 mA
7.3 Ω
759 kHz
3131
0.315 in (8 mm)
0.256 in (6.5 mm)
DFE201208S-1R0M=P2
Murata Manufacturing's DFE201208S-1R0M=P2 is a shielded, dual-ended fixed inductor with 1uH nominal inductance. Ideal for power applications, it has a max rated current of 2.1A and operates b/w -40 to 125°C. Its compact SMT package measures 2x1.2x0.8mm, making it suitable for various general-purpose inductor needs.
2.1 A
84 mΩ
0805
DFE201208S-2R2M=P2
Murata Manufacturing's DFE201208S-2R2M=P2 is a shielded, dual-ended fixed inductor with 2.2uH nominal inductance and 1.4A max rated current. Ideal for power applications, this SMT inductor has an operating temperature range of -40 to 125°C and features wraparound terminals.
1.4 A
204 mΩ
DFE201210S-2R2M=P2
Murata Manufacturing's DFE201210S-2R2M=P2 is an 0805 fixed inductor with 2.2uH nominal inductance, suitable for power applications. With a max rated current of 1.5A and operating temperature range from -40 to 125°C, it offers high performance in a compact SMT package. The shielded dual-ended inductor features wraparound terminals and metal alloy core construction for general purpose use.
1.5 A
155 mΩ
DFE201210S-R47M=P2
Murata Manufacturing's DFE201210S-R47M=P2 is a shielded, surface mount fixed inductor with 0.47uH nominal inductance and 3.4A max rated current. Ideal for power applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 125°C.
3.4 A
32 mΩ
DFE252007F-1R0M=P2
Murata Manufacturing's DFE252007F-1R0M=P2 is a shielded, dual-ended fixed inductor with 1uH nominal inductance. Ideal for power applications, it has a max rated current of 2.1A and operates b/w -40 to 125°C. Its compact SMT package measures 2.5mm x 2mm x 0.7mm, making it suitable for various general purpose inductor needs.
85 mΩ
0.028 in (0.7 mm)
MDH10060C-150MA=P3
Murata Manufacturing's MDH10060C-150MA=P3 is a shielded, surface mount fixed inductor with 15uH nominal inductance. It has a max rated current of 3.1A and operates b/w -55°C to 150°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
15 μH
35.1 mΩ
WR483265-15F5-G
The TDK WR483265-15F5-G is a general purpose inductor with 13.3uH nominal inductance, 0.2 ohm DC resistance, and operates b/w -30 to 70°C. Its rectangular package design with radial terminal placement makes it suitable for various electronic applications requiring fixed inductors.
13.3 μH
1.898 in (48.2 mm)
0.049 in (1.25 mm)
1.268 in (32.2 mm)
AWCCA-20N20H20-C01-B
Abracon's AWCCA-20N20H20-C01-B is a 6.3uH general purpose inductor with 0.15 ohm DC resistance. It has flexible lead terminals, operates b/w -25°C to 85°C, and offers a min quality factor of 34 at nominal inductance. Ideal for transmitter coil applications due to its circular shape and special package style.
Transmitter Coil
34
150 mΩ
Special
CLF12555T-101M-D
The TDK CLF12555T-101M-D is a shielded, surface mount fixed inductor with dual-ended terminals. It offers a nominal inductance of 100uH, max rated current of 1.3A, and operates b/w -40 to 150°C. Ideal for power applications, this general purpose inductor features ferrite core material and measures 12.5mm x 12.1mm x 5.5mm.
190 mΩ
4948
0.217 in (5.5 mm)
0.476 in (12.1 mm)
Tape and Reel, Punched Paper, 13 in
© 2023 All rights reserved