Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DFE201210S-2R2M=P2 is an 0805 fixed inductor with 2.2uH nominal inductance, suitable for power applications. With a max rated current of 1.5A and operating temperature range from -40 to 125°C, it offers high performance in a compact SMT package. The shielded dual-ended inductor features wraparound terminals and metal alloy core construction for general purpose use.
Median Price
$0.114
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Semtec, LLC
Component Sense
Netroflash
Corohmni
$0.931
AZTECH Wire
$18.758
Authorized Procurement Solutions
Assy Fe
Kepictronics
This feature allows for easy and convenient installation on PCBs, making it a suitable choice for compact electronic devices.
The shielding helps to reduce electromagnetic interference, ensuring reliable performance in sensitive electronic applications.
Dual ended terminal placement provides flexibility in circuit design and allows for easy connection.
Tested at a high frequency, ensuring accurate and consistent performance in various operating conditions.
This standardized size code is widely used, making it compatible with a variety of applications and designs.
The rectangular design allows for efficient use of space on the PCB, ideal for compact electronics.
This packing method ensures safe transportation and storage of the inductors, maintaining their quality.
Designed for power applications, this inductor can handle high currents and voltages efficiently.
The rectangular shape is practical for space-saving layouts and efficient PCB designs.
With two terminals, this inductor is easy to install and suitable for a wide range of circuit configurations.
The SMT package style is compatible with automated assembly processes, saving time and labor costs.
The 2.2 uH inductance value is suitable for various applications, providing the right amount of inductance.
The wraparound terminal shape ensures secure connections and simplifies PCB layout.
With a high operating temperature, this inductor can withstand demanding environmental conditions.
The 1.5 A rated current allows for reliable performance in applications requiring high current levels.
The wide temperature range ensures reliable operation even in extreme temperatures.
Ideal for a wide range of applications, this general purpose inductor offers versatility and flexibility.
The low DC resistance ensures efficient power transfer and minimal power loss.
The metal alloy core provides high magnetic permeability and low core losses for improved efficiency.
The compact height makes this inductor suitable for space-constrained applications.
With a 20% tolerance, this inductor offers accurate and reliable performance within specified limits.
The small package length allows for compact and efficient PCB layout designs.
The narrow width of the package enables the inductor to fit into tight spaces on the PCB.
Fixed Inductors DFE201210S-2R2M=P2 attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
DFE201210S-2R2M=P2 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Apr/2022
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
AB26TRB-32.768KHZ--T
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
New England Semiconductor
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
IHLP2020CZER4R7M11
Vishay Intertechnology
Vishay Intertechnology's IHLP2020CZER4R7M11 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for high current applications, this general purpose inductor has a self-resonance frequency of 25MHz and operates b/w -55°C to 125°C.
XAL6060-682MEC
Coilcraft
Coilcraft XAL6060-682MEC is a shielded, surface mount inductor with 6.8uH nominal inductance and 9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 18MHz.
SRN5040-220M
Bourns
Bourns SRN5040-220M is a shielded, surface mount inductor with 22uH nominal inductance and 1.4A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a DC resistance of 0.152 ohm.
NLV32T-1R0J-PF
TDK
The TDK NLV32T-1R0J-PF is a 1uH general purpose inductor with dual-ended terminals, suitable for RF applications. Featuring a max operating temperature of 105°C and a self-resonance frequency of 120MHz, this SMT inductor has a DC resistance of 0.7 ohm. Its compact size (3.2mm x 2.5mm x 2.2mm) makes it ideal for space-constrained designs.
#919AS-1R0N=P3
Murata Manufacturing's #919AS-1R0N=P3 is a shielded SMT inductor with 1uH nominal inductance, 9.7A max current, and 30% tolerance. Ideal for general purpose applications requiring high current handling in compact spaces.
B82462A4473K000
The TDK B82462A4473K000 is a fixed inductor with 47uH nominal inductance, 0.64 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component operates b/w -55°C to 150°C with a max rated current of 0.54A.
744772100
Wuerth Elektronik & Kg
Wurth Elektronik 744772100 is a general purpose inductor with 10uH nominal inductance, 2.6A max current, and -40 to 125°C operating temp range. Used as a filter choke in applications requiring radial terminal placement and cylindrical package shape.
DRA74-4R7-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
DR74-220-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SLF10145T-101M1R0-PF
SLF10145T-101M1R0-PF by TDK is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.1A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.2 ohm and operates b/w -40°C to 105°C temperature range.
B82498F1222J000
The TDK B82498F1222J000 is a surface mount fixed inductor with 2.2uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 1.6 ohm, and self-resonance frequency of 330 MHz. Ideal for general purpose use due to its compact size and high quality factor.
ACT45B-101-2P-TL003
Epcos Ag
GENERAL PURPOSE INDUCTOR; Manufacturer Series: ACT45B; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
DR74-101-R
Coiltronics
SRU1038-3R5Y
Bourns SRU1038-3R5Y is a shielded SMT inductor with 3.5uH nominal inductance, 5.5A max current, and 35MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 10x10x3.8mm.
B82477P4104M000
B82477P4104M000 by TDK is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 100 uH and can handle a max rated current of 1.87 A. This general purpose inductor is commonly used for power applications and operates within a temperature range of -55 to 150 °C.
BDCD002016101R0MS1
Yageo's BDCD002016101R0MS1 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and has a compact size of 2mm x 1.6mm x 1mm.
HCF1007-3R3-R
Eaton Corporation
HCF1007-3R3-R by Eaton Corp is a surface mount fixed inductor with 3.3uH nominal inductance, 0.0075 ohm DC resistance, and 10% tolerance. It is a general purpose power inductor suitable for applications requiring a max operating temperature of 125°C and min of -40°C. The rectangular package with ferrite core and wraparound terminals make it ideal for various electronic devices.
VLS6045EX-100M
VLS6045EX-100M by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 3.4A max rated current. Ideal for power applications, it features a rectangular package, ferrite core material, and operates b/w -40°C to 105°C temperature range.
LQM21NN4R7K10L
Murata Manufacturing's LQM21NN4R7K10L is an 0805 SMT inductor with 4.7uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, self-resonance frequency of 47MHz, and ferrite core material. Ideal for general purpose use with a Q factor of at least 45 at the test frequency of 10MHz.
LQH43MN100K03L
Murata Manufacturing's LQH43MN100K03L is a surface mount fixed inductor with 10uH nominal inductance, 0.4A max current, and 35 min quality factor at 1MHz. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DFE21CCN2R2MEL
Murata
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
DFE21CCN2R2MELL
DFE21CCN2R2MELL by Murata Manufacturing is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 2.2 uH and can handle a max rated current of 1.8 A. This general-purpose inductor is commonly used for power applications due to its compact rectangular package and high operating temperature range (-40 to 125 °C).
DFE252012F-1R0M=P2
Toko
Murata Manufacturing's DFE252012F-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
DFE252012P-2R2M=P2
Murata Manufacturing's DFE252012P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. Ideal for power applications, it has a compact rectangular package measuring 2.5mm x 2mm x 1.2mm, operating b/w -40°C to 125°C efficiently at a test frequency of 1MHz.
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Core Material: IRON;
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Operating Temperature: 125 Cel;
DFE252012P-4R7M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
DFE201612E-2R2M=P2
DFE201612E-R47M=P2
DFE252012PD-R47M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
DFE201610E-2R2M=P2
DFE201610E-1R0M=P2
Murata's DFE201610E-1R0M=P2 is a shielded, dual-ended SMT inductor with 1uH nominal inductance. Operating b/w -40 to 125°C, it has a max rated current of 2.7A making it ideal for power applications. With a compact size of 2x1.6x1mm, this general-purpose inductor suits various electronic devices.
DFE201610P-2R2M=P2
Murata Manufacturing's DFE201610P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.4A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
DFE201610P-1R5M=P2
Murata Manufacturing's DFE201610P-1R5M=P2 is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 1.8A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package measuring 2mm x 1.6mm x 1mm and operates b/w -40°C to 125°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved