Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Core Material: IRON;
Median Price
$0.157
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.204
100+ parts
$0.194
1k+ parts
10k+ parts
-
Mouser Electronics
$0.220
$0.150
$0.124
$0.096
TTI
DigiKey
$0.100
Arrow
$0.097
Verical
Element14
$0.254
$0.192
$0.162
Farnell
$0.137
$0.103
$0.083
Future Electronics
$0.187
Chip1Stop
RS (Exports)
$0.177
Greenchips
$0.093
$0.089
$0.084
$0.076
Nova Conductors
$0.429
Chip Stock
Component Sense
ComSIT Distribution GmbH
TME
$0.114
ComSIT USA
Vyrian
NAC Semi
$0.158
A&K Electronics
Bristol Electronics
Sensible Micro Corp
Connect4Technologies Inc.
IBS Electronics
$0.266
Prism Electronics
Semicontronic
$0.074
Argo Parts USA
$0.181
$0.176
Advanced Electronics
$0.431
$0.409
Corohmni
$0.496
Aztec Data Supply Inc.
$0.927
Perfect Parts
S.R.D Solutions
Abacus Technologies
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Authorized Procurement Solutions
Kepictronics
GreenTree Electronics
Infinite Electronics LLP (Excess)
Formix International (Excess)
Continental Prestige Electronics
$0.135
$0.133
$0.130
Eastek
Robosynatics
$0.154
$0.151
Lucentia Tech
Speed Components Ltd (Excess)
Netroflash
$0.420
$0.408
$0.399
Fixed Inductors DFE252012P-2R2M=P2 attributes and parameters. Explore more Fixed Inductors devices from Toko
Inductor Type:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Manufacturer Series:
Package Shape:
Case or Size Code:
Shielded:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
DFE252012P-2R2M=P2 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Packaging - Multiple Devices Packaging Labeling 01/Aug/2020
DLA Piper is working with TOKO to solve the inefficiencies of today’s capital markets by leveraging distributed ledger technology. TOKO is a digital asset creation platform that couples the compliance and regulatory rigor of a global law firm with the innovative technology solutions of tomorrow. TOKO provides a platform for creating new markets and uses distributed ledger technology to disseminate market information and provide transparency.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
DR125-330-R
Eaton Corporation
Eaton Corporation's DR125-330-R is a shielded, surface mount fixed inductor with 33uH nominal inductance. It has a max rated current of 3.28A and operates b/w -40 to 125°C, making it ideal for power applications requiring general purpose inductors. The dual-ended terminal placement and ferrite core construction ensure efficient performance in compact rectangular package measuring 12.5mm x 12.5mm x 6mm.
B78148S1475J000
TDK
B78148S1475J000 by TDK is a tubular fixed inductor with 4700 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a DC resistance of 78 ohm. This general purpose inductor features a min quality factor of 35 at L-nom and self-resonance frequency of 0.7 MHz, making it ideal for various electronic circuits requiring high-quality RF components.
32860
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Rated Current: 56.3 A; Manufacturer Series: 221;
IHLP6767GZER8R2M11
Vishay Intertechnology
Vishay Intertechnology's IHLP6767GZER8R2M11 is a shielded, surface mount fixed inductor with 8.2uH nominal inductance and 21A max rated current. Ideal for RF applications, it operates b/w -55°C to 125°C, featuring a self-resonance frequency of 10MHz and DC resistance of 0.0081 ohm.
XFL4015-471MEC
Coilcraft
Coilcraft XFL4015-471MEC is a shielded, surface mount inductor with 0.47uH nominal inductance and 11.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 89MHz and operates b/w -40 to 125°C.
CM322522-1R0KL
Bourns
Bourns CM322522-1R0KL is a 1210 SMT inductor with 1uH nominal inductance, 0.4A max current, and 30 min Q factor. Ideal for RF applications due to 120MHz self-resonance frequency and ferrite core material. Dual-ended terminals with J bend shape make it versatile for various circuit designs.
DRA127-151-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; DC Resistance: .269 ohm;
30028
Vanguard Electronics
GENERAL PURPOSE INDUCTOR; Package Style (Meter): SMT; Tolerance: 10 %; Package Length: 2.794 mm; Maximum Rated Current: .13 A; Minimum Operating Temperature: -55 Cel;
B82464A4472M000
The TDK B82464A4472M000 is a fixed inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 4.3A and operates b/w -55°C to 150°C. This general-purpose inductor features dual-ended terminals and a rectangular package design for surface mount assembly.
PE-0402CD400KTT
Pulse Electronics
PE-0402CD400KTT by Pulse Electronics is a 0402 wirewound chip inductor with 0.04uH nominal inductance, suitable for RF applications. With a max operating temp of 125°C and self-resonance frequency of 2240MHz, it's ideal for general purpose use in SMT configurations. Featuring dual-ended terminals and ceramic core material, this inductor offers high quality factor and low DC resistance.
LQM18PHR47MFRL
Murata Manufacturing
Murata Manufacturing's LQM18PHR47MFRL is a shielded, surface mount inductor with 0.47uH nominal inductance and 1.1A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C.
36501J10NJTDG
TE Connectivity
TE Connectivity's 36501J10NJTDG is a surface mount fixed inductor with dual-ended terminals. It operates at a test frequency of 250 MHz, offering a nominal inductance of 0.01 uH for RF applications. With a max rated current of 0.7 A and self-resonance frequency of 4800 MHz, it is ideal for general purpose inductor needs.
B82731M2501A030
The TDK B82731M2501A030 is a radial fixed inductor with 47000 uH nominal inductance, 2 ohm DC resistance, and 50% tolerance. It is a general purpose power inductor for PCB mount applications, featuring a rectangular package with flat terminals and ferrite core material. Operating temperature ranges from -40 to 125 °C, suitable for various electronic devices requiring up to 0.5 A rated current.
DR127-100-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
DR73-101-R
Coiltronics
DRA74-4R7-R
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
74477710
Wuerth Elektronik & Kg
Wurth Elektronik 74477710 is a shielded, dual-ended SMT inductor with 10uH nominal inductance and 2A max current. Ideal for power applications, it has a self-resonance frequency of 26MHz and operates b/w -40°C to 125°C.
SD53-4R7-R
Eaton Corporation's SD53-4R7-R is a shielded fixed inductor with 4.7uH nominal inductance, suitable for general purpose applications. With a max rated current of 2.1A and operating temperature range from -40 to 125°C, it is ideal for various electronic circuits requiring reliable performance in compact spaces. This surface mount component features dual-ended terminals and ferrite core material, making it versatile for different circuit designs.
HCM1305-R22-R
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Nominal Inductance (L): 4.7 uH;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DFE252012F-1R0M=P2
Toko
Murata Manufacturing's DFE252012F-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
DFE252012P-2R2M=P2
Murata Manufacturing's DFE252012P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. Ideal for power applications, it has a compact rectangular package measuring 2.5mm x 2mm x 1.2mm, operating b/w -40°C to 125°C efficiently at a test frequency of 1MHz.
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Operating Temperature: 125 Cel;
DFE252012P-4R7M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
DFE201612E-2R2M=P2
DFE201612E-R47M=P2
DFE252012PD-R47M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
DFE201610E-2R2M=P2
DFE201610E-1R0M=P2
Murata's DFE201610E-1R0M=P2 is a shielded, dual-ended SMT inductor with 1uH nominal inductance. Operating b/w -40 to 125°C, it has a max rated current of 2.7A making it ideal for power applications. With a compact size of 2x1.6x1mm, this general-purpose inductor suits various electronic devices.
DFE201610P-2R2M=P2
Murata Manufacturing's DFE201610P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.4A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
DFE201610P-1R5M=P2
Murata Manufacturing's DFE201610P-1R5M=P2 is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 1.8A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package measuring 2mm x 1.6mm x 1mm and operates b/w -40°C to 125°C.
DFE252012P-2R2M
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved