Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQH3NPZ100MGRL is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.12A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and has a self-resonance frequency of 20MHz.
Median Price
$0.200
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
$0.195
1k+ parts
$0.173
10k+ parts
$0.162
Arrow
$0.206
$0.147
Chip Stock
Cyclops Electronics Ltd
Vyrian
Bristol Electronics
$0.703
Nova Conductors
Corohmni
$0.245
Advanced Electronics
$0.833
$0.825
$0.792
AZTECH Wire
$11.580
Authorized Procurement Solutions
Argo Parts USA
iodParts Technologies Inc.
Netroflash
Continental Prestige Electronics
Being surface mountable makes it easy to integrate into PCB designs, saving space and simplifying assembly processes.
Shielding helps reduce electromagnetic interference, enhancing the performance and reliability of the inductor.
Dual ended terminal placement allows for flexibility in circuit layout and connections.
Designed specifically for power applications, ensuring efficient energy transfer and regulation.
Provides the desired inductance value for various circuit requirements, offering versatility in design.
With a high maximum rated current, this inductor can handle significant power loads without overheating.
Ferrite core material offers high magnetic permeability, making the inductor suitable for high frequency applications.
Fixed Inductors LQH3NPZ100MGRL attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
Reference Standard:
LQH3NPZ100MGRL Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Apr/2023
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Continental Device India
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Meritek Electronics
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Cheng-yi Electronic
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TLC/10A-101M-00
Fastron Electronics
The Fastron Electronics TLC/10A-101M-00 is a general purpose inductor with 100uH nominal inductance, 0.019 ohm DC resistance, and 20% tolerance. It operates b/w -55 to 115 °C and features radial terminal placement for easy installation. Ideal for various applications requiring fixed inductors with circular construction.
SRN6045-100M
Bourns
Bourns SRN6045-100M is a shielded, surface mount inductor with 10uH nominal inductance and 2.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 15MHz.
MLZ2012N101LT000
TDK
MLZ2012N101LT000 by TDK is an 0805 fixed inductor with 100uH nominal inductance, suitable for general purpose applications. It features dual-ended terminals, ferrite core material, and a max operating temperature of 125°C. With a DC resistance of 3.5 ohm and rated current of 0.14A, it is ideal for surface mount designs requiring high-quality shielding.
DRA74-100-R
Eaton Corporation
Eaton Corporation's DRA74-100-R is a shielded fixed inductor with 10uH nominal inductance, 2.97A max current, and -40 to 165°C operating range. Ideal for general purpose applications requiring compact SMT package (7.6x7.6x4.35mm) with 20% tolerance and low DC resistance (0.043 ohm).
768772152
Wuerth Elektronik & Kg
768772152 by Wuerth Elektronik & Kg is a fixed inductor with 0.7mm lead diameter and 5mm lead spacing, suitable for RF applications. It has a nominal inductance of 1500uH, max operating temperature of 125°C, and self-resonance frequency of 1.5MHz. Ideal for general purpose inductor needs due to its cylindrical package design and radial terminal placement.
BDCD002016101R0MS1
Chilisin Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQW15AN47NJ00D
Murata Manufacturing
LQW15AN47NJ00D by Murata is a wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 2900 MHz. With dual-ended terminals and compact 0402 size, it is ideal for surface mount designs requiring high-quality factor components.
NRS4018T3R3MDGJ
Taiyo Yuden
NRS4018T3R3MDGJ by Taiyo Yuden is a fixed inductor with 3.3uH nominal inductance, 2A max rated current, and 45MHz self-resonance frequency. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This surface mount component has a compact size of 4x4x1.8mm ideal for various electronic devices.
IHLP5050FDER4R7M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Finish: Tin (Sn);
74479774210
Wurth Elektronik 74479774210 is an 0805 SMT fixed inductor with 1uH nominal inductance, 1.1A max current, and -40 to 125°C operating temp. Ideal for power applications due to its shielded construction and dual-ended terminals providing a quality factor of at least 12 at the resonant frequency of 100MHz.
UP2B-470-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Package Style (Meter): SMT; DC Resistance: .1388 ohm; Case or Size Code: 5541; Maximum Rated Current: 1.4 A; Core Material: Ferrite;
CTIHLP5024F-100M
Central Technologies
CTIHLP5024F-100M by Central Technologies is a shielded, surface mount fixed inductor with 10uH nominal inductance and 10A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -55°C to 125°C.
PE-53117NL
Pulse Electronics
PE-53117NL by Pulse Electronics is a general purpose inductor with 292uH nominal inductance, 0.15 ohm DC resistance, and 20% tolerance. It is a dual-ended fixed inductor for PCB mount applications, featuring rectangular construction suitable for operating temperatures from -40 to 130°C.
CTX100-1-52LP-R
CTX100-1-52LP-R by Eaton Corp is a fixed inductor with 100uH nominal inductance, 2.5A max current, and -40 to 75°C operating range. Ideal for power applications, it features radial terminals, iron core material, and cylindrical toroidal package style.
2312-V-RC
The Bourns 2312-V-RC is a shielded fixed inductor with 100uH nominal inductance and 7A max rated current. It is a high current inductor suitable for general purpose applications, featuring radial terminal placement and cylindrical package design. With a DC resistance of 0.037 ohm, it operates b/w -55 to 105 °C temperature range.
305-8
West Coast Magnetics
West Coast Magnetics' 305-8 is a choke coil inductor with 27.9uH nominal inductance, 18A max current rating, and 0.025ohm DC resistance. Ideal for general purpose applications requiring high current handling capabilities in compact spaces.
P1252.602NLT
P1252.602NLT by Pulse Electronics is a fixed inductor with 6uH nominal inductance, 7.5A max current, and -40 to 130°C operating temp range. Ideal for power applications, it's a surface-mount cylindrical package with dual-ended terminals suitable for general purpose use.
305-5
305-5 by West Coast Magnetics is a fixed inductor with a nominal inductance of 118.5 uH and max rated current of 12.7 A. It features a choke coil construction, 0.071 mm lead diameter, and is ideal for general purpose applications requiring a compact toroidal package style.
NLV25T-R47J-PF
NLV25T-R47J-PF by TDK is a 1008-sized fixed inductor with 0.47uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and magnetic shielding, it operates at -40 to 105°C with a max current of 0.35A. Ideal for general purpose use, this SMT inductor has a self-resonance frequency of 350MHz and DC resistance of 0.68 ohm.
XAL4020-102MEB
Coilcraft
Coilcraft XAL4020-102MEB is a shielded SMT inductor with 1uH nominal inductance, 9.6A max current, and 79MHz self-resonance freq. Ideal for power applications due to its high temp range (-40°C to 125°C) and AEC-Q200 standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQH32CN221K23L
Murata Manufacturing's LQH32CN221K23L is a 220uH fixed inductor with dual-ended terminals, suitable for RF applications. Featuring a self-resonance frequency of 6.8MHz and max rated current of 0.07A, this SMT inductor has a compact size of 3.2mm x 2.5mm x 2mm, making it ideal for general purpose use in electronic circuits.
LQH32PHR47NNCL
Murata Manufacturing's LQH32PHR47NNCL is a shielded SMT inductor with 0.47uH nominal inductance, 2.9A max current, and 30% tolerance. Ideal for RF applications, it operates b/w -40 to 125 °C with a self-resonance frequency of 100 MHz.
LQH32PHR47NN0L
Murata Manufacturing's LQH32PHR47NN0L is a shielded, surface mount fixed inductor with 0.47uH nominal inductance. With 2.55A max rated current and -40 to 125°C operating temperature range, it's ideal for power applications requiring general purpose inductors. The compact 1210 size package makes it suitable for various SMT designs.
LQH32CN100K33L
Murata Manufacturing's LQH32CN100K33L is a 10uH general purpose inductor with 0.39ohm DC resistance and 26MHz self-resonance frequency. It is a surface mount component suitable for RF applications, featuring dual-ended terminals and a compact 1210 size package.
LQH32MN3R3K23L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQH32CN100K23L
LQH32CN100K23L by Murata is a 10uH general purpose inductor with 0.3A max current and 26MHz self-resonance freq. Ideal for RF applications, it's a surface mount component with dual-ended terminals and operates b/w -40°C to 85°C.
LQH32PN100MNCL
LQH32PN2R2NN0L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQH32CN470K23L
Murata Manufacturing's LQH32CN470K23L is a 47uH power inductor with 1.69 ohm DC resistance, suitable for general purpose applications. It features a max rated current of 0.17A and operates b/w -40 to 85°C temperatures. This SMT inductor has dual-ended terminals and measures 3.2mm x 2.5mm x 2mm in size, making it ideal for various electronic devices requiring efficient power management.
LQH32CN2R2M33L
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQH32CN1R0M33L
LQH32CN220K23L
LQH3NPN221MGRL
LQH32CN100K53L
LQH3NPN100MJRL
Murata Manufacturing's LQH3NPN100MJRL is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 30MHz.
LQH32CN4R7M33L
LQH32CN101K23L
LQH32PN100MN0L
Murata Manufacturing's LQH32PN100MN0L is a shielded, dual-ended SMT inductor with 10uH nominal inductance. Ideal for RF applications, it has a max rated current of 0.7A and operates b/w -40 to 125°C.
LQH31MN3R3K03L
LQH31CN100K03L
LQH31CN100K03L by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 10 uH. It has a max rated current of 0.23 A and is commonly used as a power inductor in general purpose applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved