Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ETQP4LR68XFC
Panasonic
Panasonic's ETQP4LR68XFC is a shielded, dual-ended fixed inductor with 0.68uH nominal inductance. Ideal for power applications, it offers 28A max rated current and operates b/w -40 to 130°C. With a compact SMT package of 11.7mm x 10mm x 4mm, it features wraparound terminals and metal composite core for efficient performance.
General Purpose Inductor
Power Inductor
680 nH
28 A
1.58 mΩ
20 %
1
1 MHz
DC Resistance is measured at 5%
Rectangular Package
4639
Yes
Rectangular
Metal Composite
-40 °C (-40 °F)
130 °C (266 °F)
Dual Ended
Wraparound
2
SMT
0.461 in (11.7 mm)
0.157 in (4 mm)
0.394 in (10 mm)
Tape and Reel, Embossed, 15 in
IMC1210ER101J
Vishay Intertechnology
Vishay Intertechnology's IMC1210ER101J is a surface mount fixed inductor with 100uH nominal inductance and 20 min quality factor. Ideal for RF applications, it operates b/w -55 to 125 °C with a max rated current of 0.073A.
RF Inductor
100 μH
73 mA
20
14 Ω
5 %
9 MHz
796 kHz
1210
No
Iron
-55 °C (-67 °F)
125 °C (257 °F)
Matte Tin with Nickel barrier
e3
IMC1210BN101K
Vishay Intertechnology's IMC1210BN101K is a surface mount fixed inductor with 100uH nominal inductance, 14 ohm DC resistance, and 9 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and iron core material, it operates b/w -55°C to 125°C temperature range.
10 %
Molded
0.126 in (3.2 mm)
0.087 in (2.21 mm)
0.098 in (2.49 mm)
Bulk
IMC1210SY101K
Vishay Intertechnology's IMC1210SY101K is a surface mount fixed inductor with 100uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and molded construction, it operates b/w -55°C to 125°C with a max rated current of 0.073A. Ideal for general purpose use, this rectangular package inductor has a self-resonance frequency of 9MHz and DC resistance of 14 ohms.
IMC-1210
Tape and Reel, 7 in
MSS7341T-104MLD
Coilcraft
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
1.15 A
310 mΩ
7.2 MHz
100 kHz
2929
Chip
Ferrite
0.287 in (7.3 mm)
0.161 in (4.1 mm)
Tape and Reel, Embossed Plastic, 13 in
AEC-Q200
MSS7341T-622NLD
Coilcraft's MSS7341T-622NLD is a shielded chip inductor with 6.2uH nominal inductance, ideal for power applications. With a max operating temp of 125°C and rated current of 4.3A, it features dual-ended terminals and matte tin finish for durability. This general-purpose inductor is AEC-Q200 compliant, suitable for SMT mounting in compact designs.
6.2 μH
4.3 A
27 mΩ
30 %
42 MHz
MSS7341T-683MLD
Coilcraft's MSS7341T-683MLD is a shielded chip inductor with 68uH nominal inductance, suitable for power applications. With a max rated current of 1.35A and self-resonance frequency of 9.6MHz, it operates b/w -40°C to 125°C. Ideal for general purpose use, this SMT inductor features dual-ended terminals and matte tin finish with nickel barrier.
68 μH
1.35 A
250 mΩ
9.6 MHz
XAL7070-651MEC
Coilcraft XAL7070-651MEC is a shielded, surface mount inductor with 0.65uH nominal inductance and 26.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 74MHz and AEC-Q200 reference standard compliance.
650 nH
26.5 A
1.93 mΩ
74 MHz
3028
Composite
One Surface
Tin/Silver (Sn96.5Ag3.5)
0.295 in (7.5 mm)
0.276 in (7 mm)
0.283 in (7.2 mm)
Tape and Reel, Embossed Plastic, 7 in
e2
RFC20-5R0K-RC
Allied Components International
RFC20-5R0K-RC by Allied Components is a radial fixed inductor with 5uH nominal inductance, suitable for general purpose applications. It has a max rated current of 2.9A and operates b/w -20°C to 100°C, with a DC resistance of 0.08 ohm. Ideal for circuits requiring a quality factor of at least 40 at 7.9 MHz test frequency.
5 μH
2.9 A
40
80 mΩ
7.9 MHz
-20 °C (-4 °F)
100 °C (212 °F)
Radial
Wire
IHLP3232DZER1R0MA1
Vishay Intertechnology's IHLP3232DZER1R0MA1 is a shielded, surface mount inductor with 1uH nominal inductance and 18A max rated current. Ideal for high current applications, it operates b/w -55°C to 125°C and has a self-resonance frequency of 42MHz.
High Current Inductor
1 μH
18 A
5.78 mΩ
3232
0.322 in (8.18 mm)
Tape and Reel, 13 in
IHLP6767GZER100M5A
Vishay Intertechnology's IHLP6767GZER100M5A is a shielded, surface mount fixed inductor with 10uH nominal inductance. Ideal for RF applications, it has a max rated current of 16A and operates b/w -55°C to 155°C. With a self-resonance frequency of 7.7MHz, this general purpose inductor is AEC-Q200 compliant.
10 μH
16 A
10.91 mΩ
7.7 MHz
6767
155 °C (311 °F)
Matte Tin Over Nickel
0.675 in (17.15 mm)
IHLP2020BZER6R8M11
Vishay Intertechnology's IHLP2020BZER6R8M11 is a shielded, high current inductor with 6.8uH nominal inductance and 2.8A max rated current. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 21MHz and operates b/w -55°C to 125°C.
6.8 μH
2.8 A
121 mΩ
21 MHz
2020
0.204 in (5.18 mm)
0.079 in (2 mm)
XAL5030-122MEC
Coilcraft XAL5030-122MEC is a shielded, surface mount inductor with 1.2uH nominal inductance and 10.4A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C, featuring a self-resonance frequency of 45MHz and AEC-Q200 reference standard compliance.
1.2 μH
10.4 A
12.4 mΩ
45 MHz
2221
Tin/Silver
0.216 in (5.48 mm)
0.122 in (3.1 mm)
0.208 in (5.28 mm)
XAL6030-561MEC
Coilcraft XAL6030-561MEC is a shielded, surface mount inductor with 0.56uH nominal inductance and 22A max rated current. Ideal for power applications, it has a self-resonance frequency of 61MHz and operates b/w -40°C to 125°C.
560 nH
22 A
3.31 mΩ
61 MHz
2625
0.258 in (6.56 mm)
0.25 in (6.36 mm)
NS12555T150MN
Taiyo Yuden
NS12555T150MN by Taiyo Yuden is a shielded, surface mount fixed inductor with 15uH nominal inductance. It has a max rated current of 4.18A and operates b/w -40°C to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 16.6MHz and compact rectangular package design.
15 μH
4.18 A
28 mΩ
16.6 MHz
4949
0.492 in (12.5 mm)
0.217 in (5.5 mm)
Tape and Reel, Embossed, 7 in
NS12555T221MN
NS12555T221MN by Taiyo Yuden is a shielded, surface mount fixed inductor with 220uH nominal inductance. It has a max rated current of 1.18A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 4.4MHz and compact rectangular package design.
220 μH
1.18 A
324 mΩ
4.4 MHz
NS12555T470MN
NS12555T470MN by Taiyo Yuden is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 2.7A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and self-resonance frequency of 9.3MHz.
47 μH
2.7 A
66.2 mΩ
9.3 MHz
NS12555T471MN
470 μH
800 mA
624 mΩ
2.8 MHz
NS12575T5R6NN
NS12575T5R6NN by Taiyo Yuden is a shielded, surface mount fixed inductor with 5.6uH nominal inductance and 30% tolerance. It operates b/w -40 to 125 °C with a max rated current of 6.36A, making it ideal for power applications requiring high efficiency and reliability. Its compact rectangular package size of 12.5mm x 12.5mm x 7.5mm suits space-constrained designs where general purpose inductors are needed.
5.6 μH
6.36 A
14 mΩ
26.2 MHz
CDRH10D68RT125NP-330PC
Sumida
Sumida's CDRH10D68RT125NP-330PC is a shielded, surface mount fixed inductor with 33uH nominal inductance and 2.6A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a ferrite core material.
33 μH
2.6 A
59.1 mΩ
25 %
4242
0.417 in (10.6 mm)
7447797180
Wurth Elektronik
Wurth Elektronik 7447797180 is a shielded, dual-ended SMT inductor with 1.8uH nominal inductance and 9.4A max current rating. Ideal for power applications, it operates b/w -40°C to +150°C with a self-resonance frequency of 86MHz.
1.8 μH
9.4 A
8.4 mΩ
86 MHz
4040
40 °C (104 °F)
150 °C (302 °F)
0.402 in (10.2 mm)
0.177 in (4.5 mm)
7447798241
Wurth Elektronik 7447798241 is a shielded, dual-ended power inductor with 24uH nominal inductance. Ideal for general purpose applications, it has a max rated current of 4.5A and operates b/w -40°C to +150°C.
24 μH
4.5 A
39.5 mΩ
16 MHz
Nickel-Zinc
0.252 in (6.4 mm)
AIRD-01-6R8M
Abracon
Abracon AIRD-01-6R8M is a 6.8uH fixed inductor with 9A max current, -40 to 125°C operating range. Ideal for power applications due to cylindrical shape and ferrite core material. Terminal spacing of 14.5mm makes it suitable for various general-purpose inductor needs.
9 A
8 mΩ
1 kHz
Cylindrical Package
0.063 in (1.6 mm)
0.571 in (14.5 mm)
Cylindrical
0.827 in (21 mm)
0.65 in (16.5 mm)
60B334C
Murata Manufacturing
Murata Manufacturing's 60B334C is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 330uH, max rated current of 4A, and self-resonance frequency of 2.66MHz. Ideal for power applications, this general purpose inductor operates b/w -40 to 85°C efficiently.
330 μH
4 A
15 %
2.66 MHz
85 °C (185 °F)
0.925 in (23.5 mm)
0.787 in (20 mm)
1.063 in (27 mm)
AIRD-03-1R2M
Abracon's AIRD-03-1R2M is a radial fixed inductor with 1.2uH nominal inductance, suitable for power applications. With a max rated current of 21A and operating temperature range from -25 to 85°C, it offers general-purpose functionality in a cylindrical package.
21 A
3 mΩ
10 Hz
AIRD-03
-25 °C (-13 °F)
HL021R0BTTR
KYOCERA AVX
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
420 mA
15
100 mΩ
7000 MHz
450 MHz
0402
Tin
0.039 in (1 mm)
0.014 in (0.35 mm)
0.023 in (0.58 mm)
Tape and Reel
74408943680
Wurth Elektronik 74408943680 is a shielded fixed inductor with 68uH nominal inductance, 0.7 ohm DC resistance, and 0.6A max rated current. Ideal for power applications, this SMT component features dual-ended terminals and operates b/w -40 to 125°C.
600 mA
700 mΩ
9.5 MHz
Inductance is measured at 1 mA
1919
Tin Silver Copper
0.189 in (4.8 mm)
0.15 in (3.8 mm)
e1
744851330
Wurth Elektronik 744851330 is a surface mount fixed inductor with 3.3uH nominal inductance, 7.7A max rated current, and -40 to 125°C operating temperature range. Ideal for power applications, this general purpose inductor features dual-ended terminals and a rectangular package design.
3.3 μH
7.7 A
12.2 mΩ
57 MHz
9373
4
SRP4012-1R0M
Bourns
Bourns SRP4012-1R0M is a shielded SMT inductor with 1uH nominal inductance, 4.8A max current, and -55 to 125°C operating temp. Ideal for power applications due to its general purpose design and compact rectangular package (4.7mm x 4mm x 1.2mm).
4.8 A
33.6 mΩ
1916
Shielded
Tin/Silver/Copper
0.185 in (4.7 mm)
0.047 in (1.2 mm)
XAL1580-102MED
Coilcraft XAL1580-102MED is a shielded, dual-ended SMT inductor with 1uH nominal inductance and 57.5A max current rating. Ideal for power applications, it operates b/w -40°C to 125°C, featuring low DC resistance of 0.00112 ohm and self-resonance frequency of 30MHz.
57.5 A
1.12 mΩ
30 MHz
6460
0.638 in (16.2 mm)
0.323 in (8.2 mm)
0.598 in (15.2 mm)
XAL1580-401MED
Coilcraft XAL1580-401MED is a shielded, surface mount inductor with 0.4uH nominal inductance and 60A max rated current. Ideal for power applications, it has a self-resonance frequency of 53MHz and operates b/w -40°C to 125°C.
400 nH
60 A
700 μΩ
53 MHz
XAL1580-612MED
Coilcraft XAL1580-612MED is a shielded, dual-ended power inductor with 6.1uH nominal inductance and 22.6A max rated current. Ideal for general purpose applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 11.7MHz.
6.1 μH
22.6 A
6.79 mΩ
11.7 MHz
0.315 in (8 mm)
XAL1580-741MED
Coilcraft XAL1580-741MED is a shielded, dual-ended power inductor with 0.74uH nominal inductance. Operating b/w -40 to 125°C, it has a max current of 59.7A and self-resonance frequency of 35.1MHz. Ideal for general purpose applications requiring high performance SMT components.
740 nH
59.7 A
860 μΩ
35.1 MHz
ASPI-0804T-151M-T
Abracon's ASPI-0804T-151M-T is a surface mount fixed inductor with 150uH nominal inductance, suitable for power applications. It has a max rated current of 1A and operates b/w -40 to 85°C. The dual-ended terminal placement and rectangular package make it ideal for general purpose inductor needs.
150 μH
1 A
400 mΩ
5337
0.531 in (13.5 mm)
0.374 in (9.5 mm)
ASPI-0804T-680M-T
Abracon's ASPI-0804T-680M-T is a surface mount fixed inductor with 68uH nominal inductance, suitable for power applications. It has a max rated current of 1.4A and operates b/w -40 to 85°C. The dual-ended terminal placement and rectangular package make it ideal for general purpose inductor needs.
1.4 A
200 mΩ
AGP2923-153KL
AGP2923-153KL by Coilcraft is a shielded fixed inductor with 15uH nominal inductance, 26A max current, and 16MHz self-resonance freq. Ideal for power applications on PCBs due to its rectangular shape, ferrite core material, and AEC-Q200 reference standard compliance.
26 A
2.6 mΩ
300 kHz
140 °C (284 °F)
Flat
PCB Mount
1.06 in (26.92 mm)
0.915 in (23.24 mm)
0.668 in (16.97 mm)
Tray
AGP2923-223KL
Coilcraft AGP2923-223KL is a shielded fixed inductor with 22uH nominal inductance, suitable for power applications. With a max rated current of 26A and self-resonance frequency of 13MHz, it operates b/w -40 to 140°C. Ideal for PCB mounting, this general purpose inductor features radial terminals and ferrite core material.
22 μH
13 MHz
AGP2923-472KL
AGP2923-472KL by Coilcraft is a shielded fixed inductor with 4.7uH nominal inductance, 26A max current, and 30MHz self-resonance freq. Ideal for power applications, it has a rectangular package style for PCB mount and operates b/w -40 to 140°C.
4.7 μH
LQH43CN1R0M33L
Murata Manufacturing's LQH43CN1R0M33L is a surface mount fixed inductor with 1uH nominal inductance, 2.6A max rated current, and 110MHz self-resonance frequency. Ideal for power applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 85°C.
42 mΩ
110 MHz
DC Resistance is measured at 30%
1812
0.102 in (2.6 mm)
ASPI-0428S-2R2M-T
ASPI-0428S-2R2M-T by Abracon is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 0.48A max rated current. Ideal for power applications, it operates b/w -40 to 85°C and has a DC resistance of 0.3837 ohm.
2.2 μH
480 mA
383.7 mΩ
ASPI-0428S
IHLP5050FDER100MA1
Vishay Intertechnology's IHLP5050FDER100MA1 is a shielded, surface mount fixed inductor with 10uH nominal inductance and 10A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C, featuring a DC resistance of 0.0172 ohm and AEC-Q200 reference standard compliance.
10 A
17.2 mΩ
5251
Tin Over Nickel
0.522 in (13.259 mm)
0.508 in (12.9 mm)
IHLP5050FDER4R7MA1
Vishay Intertechnology's IHLP5050FDER4R7MA1 is a shielded, high current inductor with 4.7uH nominal inductance and 13.5A max rated current. Ideal for general purpose applications, this SMT inductor features dual-ended terminals and operates b/w -55°C to 125°C efficiently.
13.5 A
11.2 mΩ
IHTH0750JZEB2R2M5A
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: YES; Surface Mount: NO;
44 A
1.63 mΩ
IHTH-0750JZ-5A
0.071 in (1.803 mm)
0.165 in (4.191 mm)
0.486 in (12.344 mm)
0.375 in (9.53 mm)
0.801 in (20.345 mm)
BRC2518T330M
BRC2518T330M by Taiyo Yuden is a surface mount fixed inductor with 33uH nominal inductance and 1.105 ohm DC resistance. It is a general purpose power inductor suitable for applications requiring a max rated current of 0.39A, operating b/w -40°C to 105°C temperature range.
390 mA
1.105 Ω
8 MHz
DC Resistance measured at 30% Tolerance
1007
105 °C (221 °F)
0.098 in (2.5 mm)
0.071 in (1.8 mm)
BRFL2518T1R5M
Taiyo Yuden's BRFL2518T1R5M is a surface mount fixed inductor with 1.5uH nominal inductance, suitable for power applications. Featuring dual-ended terminals and ferrite core material, it operates b/w -40 to 105 °C with a max current of 1A. Ideal for general purpose use, it has a self-resonance frequency of 100MHz and DCR measured at 30% tolerance.
1.5 μH
143 mΩ
100 MHz
BRFL2518T2R2M
Taiyo Yuden's BRFL2518T2R2M is a surface mount fixed inductor with 2.2uH nominal inductance, 0.85A max current, and 105°C operating temp. Ideal for power applications, this general purpose inductor features ferrite core material and 20% tolerance for reliable performance.
850 mA
169 mΩ
80 MHz
BRL2515T4R7MD
Taiyo Yuden's BRL2515T4R7MD is a chip inductor with 4.7uH nominal inductance, 0.65A max current, and 105°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material in a compact SMT package.
650 mA
344.5 mΩ
60 MHz
1006
0.059 in (1.5 mm)
CKS2125100M-T
CKS2125100M-T by Taiyo Yuden is an 0805 fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 85°C and a self-resonance frequency of 24MHz. This surface-mount component features dual-ended terminals and wraparound terminal shape.
110 mA
520 mΩ
24 MHz
2 MHz
0805
Multi-Layer
0.049 in (1.25 mm)
© 2023 All rights reserved