Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TAS5122DCAR
Texas Instruments
TAS5122DCAR by Texas Instruments is a 30W audio amplifier IC with 2 channels. It has a harmonic distortion of 10% and operates b/w -40 to +70°C. Ideal for audio applications requiring high power output in compact designs.
IT ALSO REQUIRES 16V TO 25.5V SUPPLY
.02 kHz
AUDIO AMPLIFIER
10 %
R-PDSO-G56
e4
14 mm
3
95 dB
2
1
56
70 Cel
0 Cel
30 W
PLASTIC/EPOXY
HTSSOP
TSSOP56,.3,20
RECTANGULAR
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
260
3.3,23
Not Qualified
1.2 mm
Audio/Video Amplifiers
24 mA
3.6 V
3 V
YES
COMMERCIAL
NICKEL PALLADIUM GOLD
GULL WING
.5 mm
DUAL
30
6.1 mm
TPA6120A2DWP
TPA6120A2DWP by Texas Instruments is a dual-channel audio amplifier with a nominal output power of 1.5W and a nominal bandwidth of 0.022 kHz. It operates on +-5/+-15V power supplies, has 20 terminals in a small outline package style, and is suitable for industrial temperature grade applications.
IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
.022 kHz
R-PDSO-G20
12.825 mm
20
85 Cel
-40 Cel
1.5 W
HSOP
SOP20,.4
SMALL OUTLINE, HEAT SINK/SLUG
+-5/+-15
2.65 mm
15 mA
15 V
5 V
BIPOLAR
INDUSTRIAL
Nickel/Palladium/Gold (Ni/Pd/Au)
1.27 mm
NOT SPECIFIED
7.52 mm
TPA6204A1DRB
TPA6204A1DRB by Texas Instruments is a small outline audio amplifier with 1.7W output power, ideal for industrial applications. It operates on 2.5-5.5V supplies, has a bandwidth of 0.02 kHz, and features a low noise figure of 105 dB. The package style is very thin profile with dual terminals in a square shape.
S-PDSO-N8
3 mm
105 dB
8
1.7 W
HVSON
SOLCC8,.12,25
SQUARE
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
3/5
1 mm
6 mA
5.5 V
2.5 V
CMOS
NO LEAD
.65 mm
THS4211DGKR
THS4211DGKR by Texas Instruments is an 8-terminal video amplifier with a supply voltage range of 2.5V to 7.5V, operating b/w -40°C to 85°C. Its small outline package makes it suitable for industrial audio and video applications requiring compact design and high performance amplification capabilities.
IT CAN ALSO OPERATE WITH 5V TO 15V SINGLE SUPPLY
VIDEO AMPLIFIER
S-PDSO-G8
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
7.5 V
THS4215DGKR
THS4215DGKR by Texas Instruments is a video amplifier with 8 terminals, operating temperature range of -40 to 85°C, and supply voltage from 2.5V to 7.5V. It is designed for audio & video applications requiring a small outline package and industrial temperature grade suitability.
THS4271DGKR
THS4271DGKR by Texas Instruments is a video preamplifier with 8 terminals in a small outline package. It operates b/w -40 to 85°C, with supply voltage ranging from 2.5V to 7.5V. Ideal for audio and video amplification applications due to its industrial temperature grade and compact design.
IT CAN ALSO OPERATE WITH 5V TO 15 V SINGLE SUPPLY
VIDEO PREAMPLIFIER
THS4275DGKR
VIDEO PREAMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
TPA3113D2PWP
TPA3113D2PWP by Texas Instruments is a 2-channel audio amplifier with 6W output power. It operates at -40 to 85°C, suitable for industrial use. With a supply voltage range of 8-26V, it features CMOS technology and low noise figure of 102dB, making it ideal for audio applications in various devices.
R-PDSO-G28
9.7 mm
102 dB
28
6 W
TSSOP28,.25
12/24
50 mA
26 V
8 V
4.4 mm
TAS5342ADDV
TAS5342ADDV by Texas Instruments is a 100W audio amplifier IC with 2 channels. It operates b/w 0-70°C, with power supplies of 12-32V. Suitable for applications requiring high-quality audio amplification in compact spaces.
R-PDSO-G44
110 dB
44
100 W
TSSOP44,.33
12,32
17 mA
13.2 V
10.8 V
.635 mm
TAS5352ADDV
TAS5352ADDV by Texas Instruments is a 125W audio amplifier IC with 2 channels. Operating at 12V, it has a noise figure of 110dB and supports supply voltages from 10.8V to 13.2V. Ideal for commercial applications requiring high power audio amplification in compact spaces.
125 W
12
TLV320AIC3107IRSBT
TLV320AIC3107IRSBT by Texas Instruments is an audio amplifier IC with 2 channels, 1.77% harmonic distortion, and 0.02 kHz bandwidth. It operates in industrial temperature range (-40 to 85 °C) with power supplies of 1.8-3.3 V, suitable for audio and video amplification applications.
IT ALSO REQUIRES ANALOG SUPPLY OF 3.3V
1.77 %
S-PQCC-N40
5 mm
40
HVQCCN
LCC40,.2SQ,16
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1.8,3.3
.8 mm
Other Consumer ICs
1.95 V
1.525 V
.4 mm
QUAD
TLV320AIC3107IYZFT
TLV320AIC3107IYZFT by Texas Instruments is a 2-channel audio amplifier with 24 dB gain. It operates in industrial temperature range (-40 to 85°C) and supports power supplies of 1.8-3.3 V. This surface-mount IC has low harmonic distortion (1.77%) making it ideal for audio applications requiring high-quality amplification.
24 dB
R-XBGA-B42
e1
3.533 mm
42
UNSPECIFIED
VFBGA
BGA42,6X7,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.625 mm
TIN SILVER COPPER
BALL
BOTTOM
3.346 mm
TPA3100D2IRGZRQ1
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
36 dB
S-PQCC-N48
7 mm
48
20 W
LCC48,.27SQ,20
AEC-Q100
26.5 mA
10 V
TPA3125D2N
TPA3125D2N by Texas Instruments is a 36W audio amplifier IC with 2 channels. It operates on power supplies from 10V to 24V, ideal for industrial applications. With a gain of 26dB and nominal bandwidth of 0.022kHz, it offers high-quality audio amplification in a compact rectangular package.
26 dB
R-PDIP-T20
25.4 mm
36 W
DIP
DIP20,.3
IN-LINE
24
5.08 mm
30 mA
NO
THROUGH-HOLE
2.54 mm
7.62 mm
TPA6101A2ZQYRG1
TPA6101A2ZQYRG1 by Texas Instruments is a 2-channel audio amplifier with 0.1% harmonic distortion, 2dB gain, and 0.05W output power. It operates in industrial temperature range (-40 to 85°C) with supply voltage of 1.6-3.6V. Ideal for compact audio applications due to its small form factor (2.5x2.5mm) and low power consumption (1.5mA).
2 dB
.1 %
S-PBGA-B15
2.5 mm
15
.05 W
BGA15,4X4,20
1.6/3.3
1.5 mA
1.6 V
TPA6132A2RTET
TPA6132A2RTET by Texas Instruments is a 16-terminal audio amplifier with 1% harmonic distortion, operating b/w -40 to 85°C. With a gain of 6 dB and nominal output power of 0.025 W, it's ideal for industrial applications requiring a compact chip carrier package with very thin profile. This surface-mount device supports up to 5.5 V supply voltage and offers two channels with a bandwidth of 0.02 kHz.
6 dB
1 %
S-PQCC-N16
16
.025 W
LCC16,.12SQ,20
3.6
3.2 mA
2.3 V
TPA6135A2RTER
TPA6135A2RTER by Texas Instruments is a 16-terminal audio amplifier with 1% harmonic distortion, 2.9mA max supply current, and 6dB gain. Ideal for industrial applications, it operates b/w -40 to 85°C with a bandwidth of 0.02 kHz. This chip carrier package has a very thin profile and is surface mountable.
2.5/5
2.9 mA
TPA6135A2RTET
TPA6135A2RTET by Texas Instruments is an audio amplifier IC with 2 channels, 6 dB gain, and 0.02 kHz bandwidth. It operates at -40 to 85 °C with a supply voltage range of 2.3-5.5 V. Ideal for compact audio applications due to its small size (3x3 mm) and low power consumption (2.9 mA).
TPA6203A1ZQVRG1
TPA6203A1ZQVRG1 by Texas Instruments is an audio amplifier IC with 1.25W output power, 1% harmonic distortion, and 0.02 kHz bandwidth. It operates b/w -40 to 85°C, suitable for industrial applications requiring high-quality audio amplification in a compact package.
S-PBGA-B8
2 mm
1.25 W
OPA832IDR
OPA832IDR by Texas Instruments is a video amplifier with 8 terminals, operating temperature range of -40 to 85°C, and supply voltage range of 1.4V to 5.5V. It is designed for audio and video applications requiring a small outline package with gull wing terminals in industrial settings.
IT CAN ALSO OPERATE WITH 2.8V TO 11V SINGLE SUPPLY
R-PDSO-G8
4.9 mm
SOP
SMALL OUTLINE
1.75 mm
1.4 V
3.9 mm
TAS5121IDKD
TAS5121IDKD by Texas Instruments is an audio amplifier IC with 2 channels, offering a nominal output power of 100W. It operates in industrial temperature range (-40 to 85°C) and has low harmonic distortion at 10%. With a small outline package style and surface-mount design, it's suitable for various audio and video amplification applications.
IT ALSO REQUIRES 10.8V TO 13.2V SUPPLY
R-PDSO-G36
15.9 mm
4
36
HSSOP
SSOP36,.56
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
3.3,12
3.6 mm
11 mm
TAS5616PHD
TAS5616PHD by Texas Instruments is a 160W audio amplifier IC with 2 channels. It operates b/w 0-70°C, suitable for commercial use. The package style is flatpack with a thin profile, featuring a terminal pitch of 0.8mm for surface mount applications.
S-PQFP-G64
5A
64
160 W
HTQFP
TQFP64,.63SQ,32
FLATPACK, HEAT SINK/SLUG, THIN PROFILE
12,50
52.5 V
25 V
TAS5631DKDR
TAS5631DKDR by Texas Instruments is a 300W audio amplifier with 2 channels. It operates b/w 0-70°C, suitable for commercial applications. With a supply voltage range of 25-52.5V, it features a small outline package ideal for surface mount designs.
.08 kHz
300 W
SSOP44,.55
TAS5631PHD
TAS5631PHD by Texas Instruments is a 2-channel audio amplifier with a nominal output power of 300W. It operates b/w 0-70°C, suitable for commercial applications. With a package style of flatpack and thin profile, it features surface mount capability and terminal finish in Ni/Pd/Au for enhanced performance.
TPA1517DWPRG4
TPA1517DWPRG4 by Texas Instruments is a 20-terminal audio amplifier IC with 6W output power and 10% harmonic distortion. It operates in industrial temperature range, has a small outline package, and supports dual terminal position. Ideal for audio applications requiring high gain and low noise figure within a bandwidth of 0.02 kHz.
20 dB
84 dB
80 mA
18 V
9.5 V
TAS5122DCARG4
TAS5122DCARG4 by Texas Instruments is an audio amplifier IC with 10% harmonic distortion, 37W output power, and 2 channels. It operates b/w 0-70°C, with supply voltages of 3-3.6V. Ideal for compact audio systems requiring high-quality sound amplification in a small outline package.
37 W
TAS5142DDV
TAS5142DDV by Texas Instruments is a 100W audio amplifier with 10% harmonic distortion. It operates b/w 0-70°C, has dual terminals, and requires 10.8-13.2V power supply for applications in commercial-grade audio and video amplification systems.
ALSO REQUIRES 0V TO 34V SUPPLY
TAS5142DKDR
TAS5142DKDR by Texas Instruments is an audio amplifier IC with 10% harmonic distortion, 100W output power, and 2 channels. It operates b/w 0-70°C, has a supply voltage range of 10.8-13.2V, and is suitable for audio and video amplification applications.
TPA2005D1DGNG4
TPA2005D1DGNG4 by Texas Instruments is an audio amplifier IC with 10% harmonic distortion, 1.45W output power, and 97dB noise figure. Ideal for industrial applications, it operates b/w -40 to 85°C with a supply voltage range of 2.5-5.5V.
97 dB
1.45 W
TSSOP8,.19
4.5 mA
Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
TPA2012D2RTJRG4
TPA2012D2RTJRG4 by Texas Instruments is an audio amplifier with 10% harmonic distortion, 2.1W output power, and 24dB gain. It is ideal for industrial applications requiring a compact design with a low noise figure of 95dB and operates in temperatures ranging from -40 to 85°C.
S-PQCC-N20
4 mm
2.1 W
LCC20,.16SQ,20
9 mA
THS3001HVCDGNR
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
420 kHz
18.5 V
4.5 V
TAS5352ADDVR
TAS5352ADDVR by Texas Instruments is a 125W audio amplifier IC with 2 channels. Operating at 12V, it offers a gain of 34dB and low noise figure of 110dB. Ideal for commercial applications requiring high power audio amplification in compact spaces.
34 dB
TAS5630DKDR
TAS5630DKDR by Texas Instruments is a 600W audio amplifier with 2 channels, operating at 10.8-13.2V. It has a gain of 23dB and nominal bandwidth of 0.08kHz, suitable for commercial-grade applications requiring high power output in compact spaces. The IC features a small outline package with surface mount capability and dual terminal position for efficient heat dissipation and easy installation.
23 dB
600 W
TAS5630DKD
TAS5630DKD by Texas Instruments is a 600W audio amplifier IC with 2 channels, operating voltage of 10.8-13.2V, and gain of 23dB. It comes in a small outline package suitable for audio applications requiring high power output and wide bandwidth up to 0.08 kHz.
TAS5630PHD
TAS5630PHD by Texas Instruments is a 600W audio amplifier with 2 channels. It operates at temperatures from 0 to 70°C and requires a supply voltage of 10.8-13.2V. Ideal for applications requiring high power audio amplification in compact spaces.
TPA3007D1PWRG4
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
R-PDSO-G24
7.8 mm
6.5 W
TSSOP24,.25
8/18
TPA3001D1PWPRG4
TPA3001D1PWPRG4 by Texas Instruments is an audio amplifier IC with 20W output power, 36dB gain, and 12V power supply. It is a surface-mount device in a small outline package suitable for industrial applications requiring high-quality audio amplification. With a wide operating temperature range of -40 to 85°C, it offers reliable performance in various environments.
OPA3692IDBQRG4
Texas Instruments OPA3692IDBQRG4 is a 16-terminal video amplifier with 3 functions. Operating b/w -40 to 85°C, it has a supply voltage range of 2.5V to 6V. Ideal for audio and video applications, this IC is surface mountable and features a small outline package style.
IT CAN ALSO OPERATE WITH 5V TO 12 V SINGLE SUPPLY
R-PDSO-G16
SSOP
SMALL OUTLINE, SHRINK PITCH
6 V
OPA3692IDRG4
OPA3692IDRG4 by Texas Instruments is a 16-terminal video amplifier with 3 functions, operating b/w -40 to 85°C. It has a small outline package style and supports supply voltage from 2.5V to 6V. Ideal for audio/video applications requiring high-quality signal amplification in industrial settings.
9.9 mm
TAS5142DDVRG4
TAS5142DDVRG4 by Texas Instruments is an audio amplifier with 10% harmonic distortion, 200W output power, and 44 terminals. It operates b/w 0-70°C and requires a supply voltage of 10.8-13.2V. Ideal for audio systems in commercial applications due to its compact size and high power output.
200 W
TAS5142DDVR
TAS5142DDVR by Texas Instruments is a 100W audio amplifier IC with 2 channels. It operates b/w 0-70°C, with harmonic distortion of 10%. The package style is small outline, suitable for audio and video amplification applications.
PGA2500IDBG4
PGA2500IDBG4 by Texas Instruments is an audio preamplifier with a gain of 6.2 dB. It operates at a min temperature of -40°C and max temperature of 85°C, making it suitable for industrial applications. With a small outline package style and surface mount capability, it offers flexibility in design and integration.
AUDIO PREAMPLIFIER
6.2 dB
10.2 mm
SSOP28,.3
+-5
40 mA
5.25 V
4.75 V
5.3 mm
SN10501DBVTG4
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY
100 kHz
R-PDSO-G5
2.9 mm
5
LSSOP
TSOP5/6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
22 mA
1.35 V
.95 mm
1.6 mm
SN10502DGNRG4
SN10502DGNRG4 by Texas Instruments is a video amplifier IC with +-5V power supplies, 100 kHz bandwidth, and 8 terminals. It is used in audio/video applications due to its small outline package style and industrial temperature grade suitability.
TAS5101IDAPG4
TAS5101IDAPG4 by Texas Instruments is a 15W audio amplifier IC with 2 channels. Operating voltage range of 3-3.6V, suitable for industrial temperature applications (-40 to 85°C). Features small outline package style and gull wing terminals, making it ideal for audio and video amplification in various electronic devices.
R-PDSO-G32
32
15 W
TSSOP32,.3
3.3,22
TAS5101IDAPRG4
TAS5101IDAPRG4 by Texas Instruments is a 15W audio amplifier IC with 2 channels. Operating voltage range of 3-22V, suitable for industrial applications. Features small outline package, dual terminals, and operates b/w -40 to 85°C.
TAS5110DAPRG4
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HTSSOP; Package Shape: RECTANGULAR;
IT ALSO REQUIRES 16.5V TO 26.5V SUPPLY
50 W
TAS5112DFDRG4
TAS5112DFDRG4 by Texas Instruments is an audio amplifier IC with 2 channels, 62W output power, and 10% harmonic distortion. It operates b/w 0-70°C, with supply voltage ranging from 3-29.5V. Ideal for applications requiring high-quality audio amplification in a compact package.
62 W
3.3,29.5
© 2023 All rights reserved
