Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Winding (Primary): 1; Inductance (Primary): 1310 uH; Maximum DC Unbalance Current: 800 mA; Minimum Input Voltage (V): 85;
Median Price
$9.018
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
Farnell
1+ parts
$7.996
100+ parts
$6.775
1k+ parts
-
10k+ parts
Mouser Electronics
$8.880
$7.480
$6.230
Element14
$8.098
$6.741
DigiKey
$9.860
$9.003
Newark
$10.770
$9.370
$8.740
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Kepictronics
Perfect Parts
SMPS Transformers 760871113 attributes and parameters. Explore more SMPS Transformers devices from Wurth Elektronik
Additional Features:
Application:
Maximum DC Unbalance Current:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Packing Method:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
760871113 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
ROHM
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
PL160-100L
Coilcraft
Coilcraft PL160-100L is a 160W SMPS transformer with 2 primary windings and inductance of 246uH. It operates b/w -40 to 125°C, suitable for AEC-Q200 applications like automotive power supplies. With dimensions of 23.37x20.83x8.94mm, it supports input voltages from 36V to 72V at frequencies ranging from 200kHz to 700kHz, featuring matte tin finish and surface mounting feature.
ZA9670-BED
ZA9670-BED by Coilcraft is a SMPS Transformer with 11.55W power rating, 9uH primary inductance, and 3.3V output voltage-1. Ideal for applications requiring AEC-Q200 approvals, it operates b/w -40 to 85°C temperatures and supports up to 42V input voltage.
DA2033-ALD
Coilcraft's DA2033-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40 to 125°C, suitable for applications requiring a min input voltage of 3V and max of 24V. With dimensions L24.13xB17.4xH9.78 mm, it is designed for surface mounting in various power supply circuits.
CTX02-15835
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX02-15835; Width: 14.4 mm; Dimensions: L14.1XB14.4XH10.6 (mm); No. of Winding (Primary): 2;
Q4343-BL
Coilcraft Q4343-BL is a SMPS transformer with 85uH primary inductance and 500V isolation voltage. It has two secondary windings, outputting 12V each, suitable for power applications. With dimensions of L27.94xB27.94xH24.13 mm, it operates b/w -40°C to 85°C temperature range.
78253/55MVC-R
Murata Manufacturing
Murata Manufacturing's 78253/55MVC-R is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputs 5V, and has a max frequency of 500KHz. Ideal for surface mount applications in power supplies.
PA5131.005NLT
Pulse Electronics
PA5131.005NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH and two windings. It operates b/w -40°C to 130°C, has output voltages of 5V, and supports up to 200 KHz frequency. Ideal for surface mount applications requiring efficient power conversion.
YA9037-ALD
Coilcraft's YA9037-ALD is a 6W SMPS Transformer with primary inductance of 25.6uH, suitable for applications requiring an output voltage of 48V. With a temperature range from -40 to 85°C, it features surface mounting and is ideal for compact power supply designs.
PA5131.006NLT
PA5131.006NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH, operating at -40 to 130°C. It has two windings for both primary and secondary, outputting 12V each. Ideal for surface mount applications in power supplies up to 200KHz frequency.
MA5597-AL
Coilcraft's MA5597-AL is a 6W SMPS transformer with 2 primary windings, 2.22uH inductance, and 12V output voltage. Ideal for applications requiring a min input voltage of 85V and max input voltage of 265V. Through-hole mounted design with dimensions of 27.94mm x 24.13mm x 27.94mm.
ZA9644-AED
ZA9644-AED by Coilcraft is a SMPS transformer with inductance of 376uH, operating temperature range -40 to 85°C. It has output voltages of 6V and 28V, suitable for applications requiring surface mount transformers in power supplies with input voltage range of 4.5-60V.
78253/35JC-R
Murata Power Solutions
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Packing Method: TR, 15 INCH; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 500 KHz;
UA7902-AL
Coilcraft UA7902-AL is a 2W SMPS Transformer with primary inductance of 25uH. It outputs 5V, suitable for applications requiring a min input voltage of 7V and max input voltage of 24V. Ideal for surface mounting, it measures 17.07mm x 10mm x 5.97mm, making it versatile for various power supply designs.
PA2047NL
PA2047NL by Pulse Electronics is a SMPS transformer with 2 primary windings and an inductance of 7.2 uH. It has a max operating temperature of 130°C and output voltages of 5V and 3.3V. This transformer is suitable for surface mount applications in power supply systems with input voltages ranging from 9V to 36V.
78253/35MC
Murata Manufacturing's 78253/35MC is a 0.5W SMPS transformer with primary inductance of 300uH. Operating at -40 to 85°C, it has output voltage of 5V and nominal input voltage of 3.3V. Ideal for surface mount applications with max frequency of 500KHz.
HA3803-BLD
Coilcraft's HA3803-BLD is a 10W SMPS transformer with primary inductance of 166.5uH, suitable for applications requiring 12V output voltage. With TR packing and dimensions L17.2xB14.98xH8.626 (mm), it operates b/w -40 to 125 °C, ideal for surface mounting in compact electronic devices.
750311607
Wuerth Elektronik & Kg
Wurth Elektronik 750311607 is a SMPS transformer with primary inductance of 14uH. It has 2 primary and 3 secondary windings, operating temperature range from -40 to 125°C. Ideal for applications requiring output voltage of 12V, surface mounting feature, and input voltage range of 30-75V.
LPR6235-253PMLC
Coilcraft's LPR6235-253PMLC is a 25uH SMPS transformer with dimensions of 6.0x6.0x3.5mm, suitable for surface mount applications. It operates b/w -40°C to 85°C, featuring silver palladium platinum terminal finish and comes in tape & reel packaging, ideal for power supply designs.
FL2015-9LD
Coilcraft FL2015-9LD is a 6W SMPS transformer with primary inductance of 22uH. It operates b/w -40 to 85°C, outputting 1600V at max input voltage of 16V. Ideal for surface mount applications up to 100 KHz frequency.
PA1835NL
PA1835NL by Pulse Electronics is a SMPS transformer with 3 primary windings, inductance of 4.5uH, and dimensions of L29.21xB21.84xH11.43 (mm). It operates b/w -40 to 130°C, outputs at 3.3V, and supports input voltages from 9V to 36V. Ideal for surface mount applications with a max frequency of 200 KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved