Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PH0808CNLT by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 240uH. It has 3 primary windings and 2 secondary windings, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications with temperature range from -40°C to 125°C.
Median Price
$6.674
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$6.139
Vyrian
Continental Prestige Electronics
$6.016
Netroflash
$5.832
$5.709
AZTECH Wire
$16.210
Argo Parts USA
High power rating allows for efficient performance and handling of heavy loads.
Multiple windings on the primary side enable better control and regulation of the input voltage.
Proper inductance value ensures smooth operation and reduced electromagnetic interference.
TR packing method provides better protection and insulation for the transformer.
Having two windings on the secondary side allows for different output voltage options.
High maximum operating temperature ensures reliability and stable performance in varying conditions.
Wide range of operating temperatures allows for usage in extreme environments.
Compact height facilitates installation in space-constrained applications.
Optimal width for fitting into standard electronic enclosures and designs.
Low minimum operating frequency supports efficient power conversion and noise reduction.
Switched-mode power supply transformer is known for high efficiency and compact size.
Surface mount design enables easy and secure installation on circuit boards.
Moderate length for compatibility with various electronic devices and systems.
High maximum operating frequency allows for faster switching and better performance in high-frequency applications.
SMPS Transformers PH0808CNLT attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Additional Features:
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PH0808CNLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devs Location 14/Jan/2023
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Rectron
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
750343068
Wuerth Elektronik & Kg
Wurth Elektronik 750343068 is a SMPS Transformer with inductance of 230uH, output voltage of 24V, and max operating temp of 125°C. Ideal for power supply applications due to its through-hole mounting feature and compact dimensions (29.3mm x 29.2mm x 30.35mm).
750342879
750342879 by Wurth Elektronik is an AEC-Q200 approved SMPS Transformer with primary inductance of 200uH. It operates b/w -40 to 125°C, outputting 17V at a nominal input voltage of 5V. Ideal for surface mount applications due to its compact size of 9.14x8x7.62mm.
PA0491NLT
Pulse Electronics
PA0491NLT by Pulse Electronics is a 100W SMPS Transformer with primary inductance of 140uH. It operates b/w -40°C to 125°C, suitable for applications requiring an output voltage of 5V. With dimensions L23.37xB20.07xH8.6 mm, it is designed for surface mounting method and has a frequency range of 200KHz to 700KHz.
750316033
Wurth Elektronik 750316033 is a SMPS transformer with inductance of 370uH. It has approvals from AEC-Q200, CSA, EN, IEC, UL and operates b/w -40 to 125°C. Ideal for applications requiring output voltage of 3.3V and min input voltage of 4.5V in compact dimensions of L12.32xB10.41xH11.43mm for surface mounting method.
PA2398NL
PA2398NL by Pulse Electronics is a SMPS transformer with 2 primary windings, 100uH inductance, and dimensions of L29.21xB21.84xH11.43 mm. It operates b/w -40 to 130 °C and has an output voltage of 12V. Ideal for applications requiring a max input voltage of 72V and operating frequency up to 250 KHz.
750312367
750312367 by Wurth Elektronik is a SMPS Transformer with inductance of 300uH, output voltage of 3.3V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature and IEC approvals.
750311608
Wurth Elektronik 750311608 is a SMPS transformer with 2 primary windings, inductance of 12uH, and TR packing. It has secondary windings, L29.08xB23.11xH11.43mm dimensions, and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount transformer with an output voltage of 24V and input voltage range of 30-75V.
PA6383-ALD
Coilcraft
Coilcraft's PA6383-ALD is a 5W SMPS transformer with primary inductance of 29.7uH, suitable for surface mounting. It has two windings each for primary and secondary, operating b/w -40°C to 85°C. Ideal for applications requiring a 5V output voltage at nominal input of 5V.
ZA9674-BED
ZA9674-BED by Coilcraft is a 12W SMPS Transformer with 9uH primary inductance. It has 2 windings for both primary and secondary, operating at -40 to 85°C. Ideal for applications requiring a max output voltage of 48V, it is AEC-Q200 approved for automotive use.
750313734
The Wurth Elektronik 750313734 SMPS Transformer has an inductance of 340uH, output voltage of 5V, and turns ratio of 1:1.1. It is designed for surface mount applications with approvals including AEC-Q200 and UL standards. Ideal for use in electronic devices requiring efficient power conversion within a temperature range of -40 to 125°C.
RA6992-BL
Coilcraft's RA6992-BL SMPS Transformer has a power rating of 250W, with 2 primary windings and an isolation voltage of 1500V. It is designed for applications requiring a transformer with inductance of 50uH, operating b/w -40°C to 85°C, and outputting at 12V. Ideal for surface mount setups, it features a turns ratio of 8T:4T and can handle input voltages ranging from 48V to 60V.
ZB1050-AED
Coilcraft's ZB1050-AED is an 8.25W SMPS transformer with 2 primary windings at 12.5uH, suitable for AEC-Q200 applications. It operates b/w -40 to 85°C, outputs 3.3V, and supports up to 300 KHz frequency, ideal for surface mounting in automotive electronics.
CJ5143-ALB
CJ5143-ALB by Coilcraft is a SMPS transformer with primary inductance of 15uH, output voltage of 350V, and operating temperature range from -40 to 125°C. It is designed for applications requiring surface mount transformers in compact spaces with input voltage ranging from 2.7V to 5.5V.
78253/35JC-R
Murata Manufacturing's 78253/35JC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm, designed for surface mount installation. It is commonly used in power supplies and electronic devices requiring efficient power conversion.
PA2517NL
PA2517NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 1200 uH, and dimensions of L18.2xB16.0xH18.0 (mm). It operates b/w -40 to 130 °C and has an output voltage of 12 V. Ideal for applications requiring a max input voltage of 400V, operating at frequencies up to 60 KHz through hole mounting.
FA2443-AL
Coilcraft's FA2443-AL is a 120W SMPS transformer with primary inductance of 200uH. It has two secondary windings, outputting 19.4V each. Ideal for power supplies, it operates b/w -40°C to 85°C and can handle input voltages from 85V to 265V.
YA9033-ALD
YA9033-ALD by Coilcraft is a 6W SMPS transformer with primary inductance of 25.6uH. It has two secondary windings and operates b/w -40°C to 85°C. This surface mount transformer is commonly used in power supply applications.
WA8759-AL
Coilcraft's WA8759-AL is an AEC-Q200 approved SMPS transformer with 1500uH primary inductance. It has 2 secondary windings, operates b/w -40°C to 125°C, and outputs 15V. Ideal for surface mount applications in automotive electronics due to its wide input voltage range of 40V to 1000V.
PH0259NL
PH0259NL by Pulse Electronics is a SMPS transformer with primary inductance of 1800 uH. It operates b/w -40 to 125 °C and outputs 24 V. Ideal for applications requiring THROUGH HOLE MOUNTED transformers due to its compact size (18x16x18.3 mm).
FL2015-4LD
Coilcraft's FL2015-4LD SMPS Transformer offers 6W power rating, 44uH primary inductance, and 1600V output voltage. Ideal for surface mount applications in SMPS circuits with a max operating frequency of 100KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PH0801CNLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Frequency: 700 KHz; Additional Features: LENGTH AND BREADTH DIMENSIONS INCLUDE TERMINAL ALSO; Packing Method: TR; Length: 24.65 mm;
PH0804CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 24.65 mm; Inductance (Primary): 275 uH; Minimum Operating Temperature: -40 Cel; No. of Winding (Primary): 3;
PH0805CNL
PH0805CNL by Pulse Electronics is a SMPS transformer with a power rating of 160W. It has 3 primary windings and an inductance of 327uH. This surface mount transformer is commonly used in applications requiring high frequency operation up to 700KHz.
PH0807CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TRAY; Length: 24.65 mm; Power Rating: 160 W; Maximum Operating Temperature: 125 Cel;
PH0811CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Power Rating: 160 W; No. of Winding (Primary): 3; Packing Method: TRAY; Additional Features: LENGTH AND BREADTH DIMENSIONS INCLUDE TERMINAL ALSO;
PH0812CNL
PH0812CNL by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 183uH. It has 3 primary windings and 2 secondary windings, suitable for applications requiring a power rating up to 160W. With a compact size of 24.65mm x 21.59mm x 10.1mm, it is ideal for surface mounting in high-frequency circuits operating b/w -40°C to 125°C.
PH0814CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 275 uH; Width: 21.59 mm; Length: 24.65 mm; Minimum Operating Frequency: 200 KHz;
PH0815CNL
PH0815CNL by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 327uH. It has 3 primary windings and 2 secondary windings, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies and converters.
PH0803NLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Minimum Operating Frequency: 200 KHz; No. of Winding (Primary): 3; Inductance (Primary): 240 uH;
PH0803NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .007 ohm; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 700 KHz; Power Rating: 160 W;
PH0807NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 194 uH; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Dimensions: L23.37XB21.6XH8.6 (mm); Packing Method: TRAY;
PH0808NLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; No. of Winding (Primary): 3; Packing Method: TAPE & REEL;
PH0808NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Winding (Primary): 3; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 200 KHz; Inductance (Primary): 240 uH;
PH0809NLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 200 KHz; No. of Winding (Primary): 3; Packing Method: TAPE & REEL;
PH0802CNLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Frequency: 200 KHz; No. of Winding (Primary): 3; Minimum Operating Temperature: -40 Cel; Width: 21.59 mm;
PH0802CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 21.59 mm; Height: 10.1 mm; Packing Method: TRAY; Power Rating: 160 W;
PH0806CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Winding (Primary): 3; Width: 21.59 mm; Inductance (Primary): 153 uH; Packing Method: TRAY;
PH0807CNLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Width: 21.59 mm; Power Rating: 160 W;
PH0808CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 21.59 mm; Maximum Operating Temperature: 125 Cel; Inductance (Primary): 228 uH; Minimum Operating Temperature: -40 Cel;
PH0809CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; No. of Winding (Primary): 3; Inductance (Primary): 275 uH; Minimum Operating Frequency: 200 KHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved