Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PH0804CNL by Pulse Electronics is a SMPS transformer with 160W power rating, 3 primary windings, and 275uH inductance. Ideal for applications requiring a surface mount transformer with operating temperatures from -40°C to 125°C and frequencies ranging from 200kHz to 700kHz.
Median Price
$7.180
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Master Electronics
1+ parts
$1.740
100+ parts
-
1k+ parts
$1.590
10k+ parts
$1.480
Verical
$6.880
Newark
$11.520
DigiKey
$7.605
$6.895
Arrow
Chip1Stop
$1.020
Nova Conductors
$1.390
Vyrian
IBS Electronics
$7.436
TME
$7.250
Continental Prestige Electronics
$1.362
Netroflash
Argo Parts USA
AZTECH Wire
$9.346
Higher power rating allows for use in applications that require more power, making this transformer a versatile and reliable choice.
Having three windings on the primary side allows for flexibility in circuit design and customization, making it suitable for a variety of applications.
The inductance value of 275 uH ensures stable and efficient power transfer, making this transformer an ideal choice for demanding power supply requirements.
The tray packing method provides protection during shipping and handling, ensuring the transformer arrives in optimal condition for installation.
Wide operating temperature range makes this transformer suitable for use in a variety of environments, from extreme cold to high heat.
Compact size allows for easy integration into space-constrained applications without sacrificing performance.
Wide operating frequency range provides versatility and compatibility with different power supply designs, making this transformer a suitable choice for various applications.
Designed specifically for switch-mode power supply applications, ensuring efficient power conversion and reliable performance.
Surface mount design allows for easy and secure installation onto circuit boards, saving space and reducing assembly time.
SMPS Transformers PH0804CNL attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Additional Features:
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PH0804CNL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devs Location 14/Jan/2023
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
SMBJ18CA
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Tesla Elektronicke Soucastky
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
ZA9670-BED
Coilcraft
ZA9670-BED by Coilcraft is a SMPS Transformer with 11.55W power rating, 9uH primary inductance, and 3.3V output voltage-1. Ideal for applications requiring AEC-Q200 approvals, it operates b/w -40 to 85°C temperatures and supports up to 42V input voltage.
GA3459-BL
Coilcraft GA3459-BL is a SMPS transformer with 4 primary windings and 5uH inductance. It operates b/w -40°C to 125°C, outputting 500V. Ideal for surface mount applications in power supplies with input voltage ranging from 5V to 24V.
WA8515-ALD
Coilcraft's WA8515-ALD is a 25W SMPS transformer with 2 primary windings at 90uH. It operates b/w -40°C to 85°C, suitable for applications requiring a 5V output voltage and up to 57V input voltage. Ideal for surface mounting in power supply designs up to 250 KHz frequency.
PA6383-ALD
Coilcraft's PA6383-ALD is a 5W SMPS transformer with primary inductance of 29.7uH, suitable for surface mounting. It has two windings each for primary and secondary, operating b/w -40°C to 85°C. Ideal for applications requiring a 5V output voltage at nominal input of 5V.
POE26W3.3VS5-R
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE26W3.3VS5-R; Packing Method: REEL; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; TURNS RATIO: 1:0.29:0.29:0.83:0.42; Length: 21.5 mm;
C1173-ALB
Coilcraft C1173-ALB is a SMPS transformer with 2 primary windings and 3 secondary windings. It offers an inductance of 166.5 uH, operates b/w -40 to 125 °C, and has dimensions of L17.20xB14.98xH8.51 mm. Ideal for applications requiring an output voltage of 3.3 V, max input voltage of 72 V, and operating frequency up to 500 KHz in surface mount setups.
FA2636-ALD
Coilcraft's FA2636-ALD is a SMPS transformer with primary inductance of 160uH. It has 2 secondary windings and operates b/w -40°C to 85°C. With output voltage of 5V, it is ideal for surface mount applications in power supplies and converters.
750312367
Wuerth Elektronik & Kg
750312367 by Wurth Elektronik is a SMPS Transformer with inductance of 300uH, output voltage of 3.3V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature and IEC approvals.
FL2015-4LB
Coilcraft's FL2015-4LB is a 6W SMPS transformer with primary inductance of 44uH. It operates b/w -40 to 85°C, outputting 1600V at max frequency of 100KHz. Ideal for surface mount applications in power supplies and converters.
DA2033-ALD
Coilcraft's DA2033-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40 to 125°C, suitable for applications requiring a min input voltage of 3V and max of 24V. With dimensions L24.13xB17.4xH9.78 mm, it is designed for surface mounting in various power supply circuits.
74030
Power Integrations
The Power Integrations 74030 is a SMPS transformer with a power rating of 22W. It has one primary winding with an inductance of 750uH and two secondary windings. The transformer is suitable for applications requiring output voltages of 6V and 4.6V, and it can handle input voltages ranging from 90V to 120V.
POE13F-12LD
Coilcraft's POE13F-12LD is a 13W SMPS transformer with primary inductance of 35uH. It features 3 primary windings and 2 secondary windings, suitable for applications requiring an output voltage of 12V. With dimensions of L17.2xB14.98xH8.51mm, it operates b/w -40 to 125°C and supports a max input voltage of 72V at a frequency up to 250 KHz, making it ideal for surface mounting in power supply circuits.
POE30P-50LD
Coilcraft's POE30P-50LD is a 3W SMPS transformer with primary inductance of 310000uH. It features dual windings for 12V and 5V output voltages, suitable for surface mount applications. With dimensions of L10.92xB8.6xH9.02mm, it operates b/w -40 to 85°C and supports frequencies up to 250KHz.
PA5100.004NLT
Pulse Electronics
PA5100.004NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125°C, outputs 3.3V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a compact transformer with a max input voltage of 57V.
78253/55C
Murata Manufacturing
Murata Manufacturing's 78253/55C is a 1W SMPS Transformer with primary inductance of 600uH. Operating at -40 to 85°C, it has an output voltage of 5V and max frequency of 500KHz. Ideal for applications requiring a compact through-hole mount transformer with a nominal input voltage of 5V.
YA9033-ALD
YA9033-ALD by Coilcraft is a 6W SMPS transformer with primary inductance of 25.6uH. It has two secondary windings and operates b/w -40°C to 85°C. This surface mount transformer is commonly used in power supply applications.
JA4456-DLB
Coilcraft's JA4456-DLB SMPS Transformer offers 25W power rating, 70uH primary inductance, and operates b/w -40°C to 125°C. Ideal for applications requiring a surface mount transformer with dual primary windings and triple secondary windings.
78250VC
Murata Manufacturing's 78250VC is a SMPS transformer with dimensions of 9mm x 6.35mm x 9.52mm for through-hole mounting. It features matte tin terminal finish and is packed in tubes. Ideal for power supply applications requiring compact transformers.
PA5100.006NLT
PA5100.006NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125°C, outputs 12V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a compact transformer solution.
750313638
Wurth Elektronik 750313638 is a SMPS Transformer with primary inductance of 340uH. It has approvals from AEC-Q200, CSA, CUL, UL and operates b/w -40 to 125°C. Ideal for applications requiring a 5V output voltage, it is a surface mount transformer with dimensions L9.14xB8.0xH7.62mm packed in TR, EMBOSSED PLASTIC packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PH0801CNLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Frequency: 700 KHz; Additional Features: LENGTH AND BREADTH DIMENSIONS INCLUDE TERMINAL ALSO; Packing Method: TR; Length: 24.65 mm;
PH0808CNLT
PH0808CNLT by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 240uH. It has 3 primary windings and 2 secondary windings, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications with temperature range from -40°C to 125°C.
PH0805CNL
PH0805CNL by Pulse Electronics is a SMPS transformer with a power rating of 160W. It has 3 primary windings and an inductance of 327uH. This surface mount transformer is commonly used in applications requiring high frequency operation up to 700KHz.
PH0807CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TRAY; Length: 24.65 mm; Power Rating: 160 W; Maximum Operating Temperature: 125 Cel;
PH0811CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Power Rating: 160 W; No. of Winding (Primary): 3; Packing Method: TRAY; Additional Features: LENGTH AND BREADTH DIMENSIONS INCLUDE TERMINAL ALSO;
PH0812CNL
PH0812CNL by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 183uH. It has 3 primary windings and 2 secondary windings, suitable for applications requiring a power rating up to 160W. With a compact size of 24.65mm x 21.59mm x 10.1mm, it is ideal for surface mounting in high-frequency circuits operating b/w -40°C to 125°C.
PH0814CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 275 uH; Width: 21.59 mm; Length: 24.65 mm; Minimum Operating Frequency: 200 KHz;
PH0815CNL
PH0815CNL by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 327uH. It has 3 primary windings and 2 secondary windings, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies and converters.
PH0802NLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L23.37XB21.6XH8.6 (mm); Length: 23.37 mm; Width: 21.6 mm; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
PH0803NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Load Resistance: .007 ohm; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 700 KHz; Power Rating: 160 W;
PH0804NLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Power Rating: 160 W; Maximum Operating Temperature: 125 Cel; Maximum Operating Frequency: 700 KHz; Minimum Operating Frequency: 200 KHz;
PH0804NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TRAY; Length: 23.37 mm; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Minimum Operating Frequency: 200 KHz;
PH0805NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 23.37 mm; Power Rating: 160 W; Width: 21.6 mm; Height: 9.1 mm;
PH0807NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 194 uH; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Dimensions: L23.37XB21.6XH8.6 (mm); Packing Method: TRAY;
PH0808NL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Winding (Primary): 3; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 200 KHz; Inductance (Primary): 240 uH;
PH0801CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 21.59 mm; No. of Winding (Primary): 2; Maximum Operating Temperature: 125 Cel; No. of Winding (Secondary): 1;
PH0802CNLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Frequency: 200 KHz; No. of Winding (Primary): 3; Minimum Operating Temperature: -40 Cel; Width: 21.59 mm;
PH0804CNLT
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Height: 10.1 mm; No. of Winding (Secondary): 1; Maximum Operating Frequency: 700 KHz;
PH0808CNL
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 21.59 mm; Maximum Operating Temperature: 125 Cel; Inductance (Primary): 228 uH; Minimum Operating Temperature: -40 Cel;
PH0809CNLT
PH0809CNLT by Pulse Electronics is a 160W SMPS Transformer with 3 primary windings and inductance of 290uH. It operates b/w -40 to 125°C, suitable for applications requiring high power density and efficiency at frequencies ranging from 200KHz to 700KHz. Ideal for surface mounting, it measures 24.65mm x 21.59mm x 10.1mm.TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved