Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's 78253/55MVC-R is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputs 5V, and has a max frequency of 500KHz. Ideal for surface mount applications in power supplies.
Median Price
$2.847
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$4.770
100+ parts
$3.882
1k+ parts
$3.723
10k+ parts
-
Arrow
$2.675
$2.570
TTI
$3.040
$2.890
Verical
$2.884
Sager Power Systems
$2.810
Sager
$2.780
Nova Conductors
$2.900
Vyrian
VNN
Sensible Micro Corp
TME
$2.860
NAC Semi
$4.460
Rutronik
$2.630
Bristol Electronics
ACDS - Activité Composants Distribution Service
Semicontronic
$2.110
$2.057
$2.047
Aranea Global
$2.842
$2.728
Argo Parts USA
Continental Prestige Electronics
Corohmni
$3.050
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Eastek
GreenTree Electronics
This low power rating makes it a suitable choice for applications where energy efficiency is important.
The high inductance value ensures efficient power transfer and reliable performance.
The TR packing method and 15-inch size make it easy to handle and install in various applications.
Compact dimensions allow for space-saving installation in devices with limited space.
The high maximum operating temperature range ensures stable performance even in harsh environments.
This specific output voltage makes it ideal for applications requiring a 5V power supply.
The low minimum operating temperature ensures reliable performance even in cold conditions.
The bright tin finish provides corrosion resistance and ensures a secure electrical connection.
The low height profile makes it suitable for slim devices or applications with height restrictions.
The narrow width allows for flexibility in mounting options and saves space on PCBs.
The nominal 5V input voltage makes it compatible with a wide range of electronic devices.
The SMPS transformer type ensures efficient power conversion and low electromagnetic interference.
The surface mount feature simplifies installation on PCBs and allows for automated assembly.
The length of 9.52mm offers versatility in installation options and compatibility with different devices.
The high maximum operating frequency allows for fast and efficient power conversion in high-frequency applications.
SMPS Transformers 78253/55MVC-R attributes and parameters. Explore more SMPS Transformers devices from Murata Manufacturing
Height:
Nominal Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
78253/55MVC-R Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Allegro MicroSystems
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
760390014
Wuerth Elektronik & Kg
Wurth Elektronik 760390014 SMPS Transformer with 475uH primary inductance, 5V output voltage, and operating freq. range of 300-620 KHz. AEC-Q200 approved for automotive applications, UL/CUL certified for safety compliance. Ideal for surface mount PCB designs in automotive electronics requiring high efficiency power conversion.
POE51Q-24ED
Coilcraft
Coilcraft's POE51Q-24ED SMPS Transformer has a power rating of 51W, inductance of 22.2uH, and output voltage of 24V. AEC-Q200 approved for automotive applications with operating temperatures from -40 to 125°C. Ideal for surface mounting in various power supply designs.
PA1736NL
Pulse Electronics
PA1736NL by Pulse Electronics is a SMPS transformer with 3 primary windings and inductance of 20.5uH. It operates b/w -40 to 130°C, outputs 12V at max input voltage of 72V, and supports frequencies up to 200 KHz. Ideal for surface mount applications requiring compact dimensions of L29.21xB21.84xH11.43mm.
PH0256NL
PH0256NL by Pulse Electronics is a SMPS transformer with 3 primary windings, 2800uH inductance, and max operating temp of 125°C. Ideal for applications requiring a 5V output voltage, it has a min operating temp of -40°C and dimensions of 14.5mm x 16.5mm x 19mm.
CX9629-ALD
CX9629-ALD by Coilcraft is a 12W SMPS transformer with primary inductance of 42.9uH, suitable for applications requiring an output voltage of 12V. With a temperature range from -40 to 85°C, it features surface mounting and is designed for use in power supplies with input voltages ranging from 36V to 57V.
LDT565630T-002
TDK
TDK's LDT565630T-002 is a SMPS transformer with primary inductance of 14.5uH, dimensions of L5.8xB5.6xH3 (mm), and surface mounting feature. Ideal for power supply applications due to its compact size and efficient performance in various electronic devices.
PA2627NLT
PA2627NLT by Pulse Electronics is a 30W SMPS Transformer with 2 primary windings and inductance of 50.5uH. It operates b/w -40 to 130°C, outputs at 3.3V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a transformer with dimensions L13.08xB15.24xH11.45mm.
PA6605-AL
Coilcraft's PA6605-AL is a SMPS transformer with 10uH inductance, 12V output voltage, and -40 to 125°C operating temperature range. Ideal for surface mount applications, it has a compact size of 30x26.67x13.6mm and supports input voltages from 9V to 60V.
B0570-BL
Coilcraft's B0570-BL SMPS Transformer has a power rating of 12W, primary inductance of 3400uH, and operates b/w -40°C to 85°C. Ideal for applications requiring a 12V output voltage, this transformer is designed with dimensions L27.94xB27.94xH24.13mm and features through-hole mounting in TRAY packaging.
749196111
Wurth Elektronik 749196111 is a SMPS transformer with 3 primary windings, inductance of 27.4uH, and dimensions L12.9xB9.2xH6.2 (mm). It operates b/w -40 to 125°C, has TIN SILVER COPPER terminal finish, and is surface mountable. Ideal for power supply applications requiring compact and efficient transformers.
B0358-CLD
Coilcraft's B0358-CLD SMPS Transformer offers 2uH primary inductance, operates b/w -40°C to 85°C, and comes in L23.37xB20.57xH9.14 mm dimensions. Ideal for surface mount applications in power supplies and converters due to its compact size and high-quality construction.
PL160-104L
Coilcraft PL160-104L is a 160W SMPS transformer with 2 primary windings, inductance of 534uH, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200kHz to 700kHz. Suitable for surface mounting with temperature range from -40°C to 125°C.
ZA9672-BED
ZA9672-BED by Coilcraft is a 12W SMPS Transformer with primary inductance of 7uH, operating at -40 to 85°C. It has 2 windings for both primary and secondary, outputting 12V at max frequency of 300KHz. Ideal for surface mount applications requiring AEC-Q200 approval.
PA5100.004NLT
PA5100.004NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125°C, outputs 3.3V, and supports up to 200KHz frequency. Ideal for surface mount applications requiring a compact transformer with a max input voltage of 57V.
PA5130.001NLT
PA5130.001NLT by Pulse Electronics is a 25W SMPS Transformer with 2 primary windings at 80uH inductance. It operates b/w -40 to 125°C, outputting dual voltages of 3.3V each. Ideal for surface mount applications with a max frequency of 200 KHz.
YA9034-ALD
Coilcraft's YA9034-ALD is a 6W SMPS Transformer with primary inductance of 28.8uH, suitable for applications requiring 12V output voltage. With TR packing method and surface mounting feature, it operates b/w -40 to 85°C temperature range.
YA9035-ALD
Coilcraft's YA9035-ALD is a 6W SMPS Transformer with primary inductance of 24uH. It has 2 secondary windings, operates b/w -40°C to 85°C, and outputs 15V. Ideal for surface mount applications in power supplies with input voltage ranging from 4V to 65V.
HA3802-BLD
Coilcraft's HA3802-BLD is a 10W SMPS transformer with primary inductance of 150uH. It has two secondary windings and operates b/w -40 to 125°C. Ideal for applications requiring a 5V output voltage, it features surface mounting and dimensions of L17.2xB14.98xH8.626mm.
LPR6235-253PMLC
Coilcraft's LPR6235-253PMLC is a 25uH SMPS transformer with dimensions of 6.0x6.0x3.5mm, suitable for surface mount applications. It operates b/w -40°C to 85°C, featuring silver palladium platinum terminal finish and comes in tape & reel packaging, ideal for power supply designs.
CX9628-ALD
CX9628-ALD by Coilcraft is a 12W SMPS transformer with primary inductance of 43.7uH. It has two secondary windings and operates b/w -40°C to 85°C. Ideal for applications requiring a 5V output voltage, it is a surface mount transformer suitable for power supplies with input voltages ranging from 36V to 57V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78253/55MVC
Murata Manufacturing
Murata Manufacturing's 78253/55MVC is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputting 5V at a frequency of up to 500KHz. Ideal for surface mount applications requiring compact dimensions and reliable power conversion.
78253/55VC
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Height: 6.35 mm; Nominal Input Voltage (V): 5; Inductance (Primary): 190 uH; No. of Winding (Secondary): 1;
78253/55C
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Height: 6.35 mm; Power Rating: 1 W; Width: 9 mm; Maximum Operating Temperature: 85 Cel;
78253/35MC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Winding (Secondary): 1; Packing Method: TUBE; Inductance (Primary): 300 uH;
78253/55MC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Bright Tin (Sn); JESD-609 Code: e3; Maximum Operating Frequency: 500 KHz; No. of Winding (Primary): 1;
78250JC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; No. of Winding (Secondary): 1; No. of Winding (Primary): 1; Height: 6.35 mm;
78250JVC-R
Murata Manufacturing's 78250JVC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, making it ideal for compact electronic devices requiring high-performance transformers in power supplies.
78253/55MC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Winding (Secondary): 1; Width: 9 mm; Height: 6.35 mm;
78253/35JC-R
Murata Power Solutions
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Packing Method: TR, 15 INCH; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 500 KHz;
78250VC
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Width: 9 mm; No. of Winding (Primary): 1; Height: 6.35 mm;
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 6.35 mm; Packing Method: TR; Width: 9 mm; No. of Winding (Primary): 1;
78253/35MC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Bright Tin (Sn); Minimum Operating Temperature: -40 Cel; No. of Winding (Secondary): 1; Dimensions: L9.52XB9.0XH6.35 (mm);
78253/35MVC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Bright Tin (Sn); Inductance (Primary): 300 uH; Maximum Operating Temperature: 85 Cel; Height: 6.35 mm;
78253/55JC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Output Voltage-1: 5 V; No. of Winding (Secondary): 1; Packing Method: TR, 15 INCH;
78253/35JVC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Power Rating: .5 W; Maximum Operating Frequency: 500 KHz; JESD-609 Code: e3;
78253/35JVC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Width: 9 mm; Maximum Input Voltage (V): 3.3;
78253/55JC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Height: 6.35 mm; Length: 9.52 mm; No. of Winding (Secondary): 1;
78253/55JVC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Winding (Secondary): 1; No. of Winding (Primary): 1; Length: 9.52 mm;
78253/35JC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Length: 9.52 mm; Maximum Operating Frequency: 500 KHz; Maximum Operating Temperature: 85 Cel;
78253/55JVC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Power Rating: 1 W; Packing Method: TUBE; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved