Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Bright Tin (Sn); Minimum Operating Temperature: -40 Cel; No. of Winding (Secondary): 1; Dimensions: L9.52XB9.0XH6.35 (mm);
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Authorized Procurement Solutions
Kepictronics
Metaverse IC Inc.
Glotronic Ltd.
Perfect Parts
SMPS Transformers 78253/35MC-R attributes and parameters. Explore more SMPS Transformers devices from Murata Manufacturing
Height:
Nominal Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
78253/35MC-R Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Lite-on Semiconductor
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
ZB1052-AED
Coilcraft
Coilcraft's ZB1052-AED is a 9.6W SMPS transformer with 2 primary windings at 14uH inductance. It operates b/w -40°C to 85°C, suitable for AEC-Q200 approved applications like automotive electronics and power supplies up to 300KHz frequency.
C1173-ALB
Coilcraft C1173-ALB is a SMPS transformer with 2 primary windings and 3 secondary windings. It offers an inductance of 166.5 uH, operates b/w -40 to 125 °C, and has dimensions of L17.20xB14.98xH8.51 mm. Ideal for applications requiring an output voltage of 3.3 V, max input voltage of 72 V, and operating frequency up to 500 KHz in surface mount setups.
760871135
Wuerth Elektronik & Kg
Wurth Elektronik 760871135 SMPS Transformer with inductance of 1250 uH, operating temperature range -40 to 125 °C, and output voltages of 12V. Ideal for surface mount applications requiring compact dimensions and input voltage range of 85-265V.
POE51Q-12ED
Coilcraft's POE51Q-12ED is a 51W SMPS transformer with 22.2uH primary inductance, AEC-Q200 approval, and 2 secondary windings. Ideal for automotive applications, it operates b/w -40°C to 125°C, with output voltage of 12V.
PA1131NLT
Pulse Electronics
PA1131NLT by Pulse Electronics is a 3W SMPS Transformer with 2 primary windings and inductance of 500uH. It has output voltages of 8V and 5V, suitable for applications requiring a max operating frequency of 200KHz. Ideal for surface mounting method in various electronic devices.
PH0259NL
PH0259NL by Pulse Electronics is a SMPS transformer with primary inductance of 1800 uH. It operates b/w -40 to 125 °C and outputs 24 V. Ideal for applications requiring THROUGH HOLE MOUNTED transformers due to its compact size (18x16x18.3 mm).
FL2015-4LD
Coilcraft's FL2015-4LD SMPS Transformer offers 6W power rating, 44uH primary inductance, and 1600V output voltage. Ideal for surface mount applications in SMPS circuits with a max operating frequency of 100KHz.
JA4372-ALB
Coilcraft's JA4372-ALB SMPS Transformer has 25W power rating, 75uH primary inductance, and 3.3V output voltage. Ideal for surface mount applications with operating temperatures from -40 to 125°C, it suits various power supply designs requiring a compact transformer solution.
CX9629-ALD
CX9629-ALD by Coilcraft is a 12W SMPS transformer with primary inductance of 42.9uH, suitable for applications requiring an output voltage of 12V. With a temperature range from -40 to 85°C, it features surface mounting and is designed for use in power supplies with input voltages ranging from 36V to 57V.
PA5111.003NL
PA5111.003NL by Pulse Electronics is a 24W SMPS Transformer with 2 primary and secondary windings, inductance of 80uH, and output voltage of 12V. Ideal for applications requiring a transformer with a max operating temperature of 130°C, surface mounting feature, and operating frequency up to 200 KHz.
B78304B1032A003
TDK
The TDK B78304B1032A003 is a SMPS transformer with inductance of 10000 uH, operating temperature range from -40 to 85 °C, and frequency range of 10 KHz to 1600 KHz. It is designed for surface mount applications in power supplies and converters.
POE38PR-12ED
Coilcraft's POE38PR-12ED is a 38W SMPS transformer with primary inductance of 100uH. It has two secondary windings and operates b/w -40°C to 125°C. Ideal for applications requiring a 12V output voltage, it is AEC-Q200 approved for automotive use.
750316031
The Wurth Elektronik 750316031 SMPS Transformer has primary inductance of 370uH, output voltage of 3.3V, and operates b/w -40°C to 125°C. It is designed for surface mount applications in various electronic devices requiring a compact transformer solution with AEC-Q200, CSA, EN, IEC, and UL approvals.
GA3372-ALD
Coilcraft's GA3372-ALD is a 13W SMPS transformer with primary inductance of 102uH. It has two secondary windings, outputting 5V each. Ideal for surface mount applications in power supplies, it operates b/w -40°C to 85°C and supports input voltages from 36V to 72V.
750311692
Wurth Elektronik 750311692 is a DATACOM TRANSFORMER with primary inductance of 80uH. It has two secondary windings, output voltages of ±150V, and operates b/w -40°C to 125°C. Ideal for SMPS applications due to its compact dimensions (L9.78xB9.14xH10.54 mm) and surface mounting feature.TR, EMBOSSED PLASTIC packing method makes it suitable for various electronic devices requiring an input voltage range of 8-15V.
POE51Q-48ED
Coilcraft's POE51Q-48ED is a 51W SMPS Transformer with 22.2uH primary inductance, AEC-Q200 approval, and 48V output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact dimensions of 14x13x14.5mm for surface mount installation.
750315240
750315240 by Wurth Elektronik is a SMPS Transformer with 440uH primary inductance, 5V output voltage-1, and -40 to 125°C operating temperature range. Ideal for surface mount applications in automotive electronics, power supplies, and industrial equipment.
750342879
750342879 by Wurth Elektronik is an AEC-Q200 approved SMPS Transformer with primary inductance of 200uH. It operates b/w -40 to 125°C, outputting 17V at a nominal input voltage of 5V. Ideal for surface mount applications due to its compact size of 9.14x8x7.62mm.
PH9185.011NL
PH9185.011NL by Pulse Electronics is a 3W SMPS Transformer with primary inductance of 750uH. It operates b/w -40 to 125°C, suitable for surface mount applications due to its compact size (13x10x12.5mm).
Q4343-BL
Coilcraft Q4343-BL is a SMPS transformer with 85uH primary inductance and 500V isolation voltage. It has two secondary windings, outputting 12V each, suitable for power applications. With dimensions of L27.94xB27.94xH24.13 mm, it operates b/w -40°C to 85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Murata Manufacturing
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved