Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 749023113C is a UL approved transformer with 1500V isolation voltage, 350uH inductance, and 4 functions. Ideal for 1000 BASE-T applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 16.5mm x 9.6mm x 2.4mm.
Median Price
$8.330
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Distrelec
1+ parts
$4.802
100+ parts
$3.958
1k+ parts
-
10k+ parts
Mouser Electronics
$6.900
$6.260
$5.440
DigiKey
$6.903
$6.267
Newark
$9.500
$8.020
$7.810
$7.650
Nova Conductors
$4.249
Vyrian
VNN
AZTECH Wire
$1.770
$1.700
$1.670
$1.630
Corohmni
$3.188
Ampacity Inc.
$4.080
Argo Parts USA
Netroflash
$4.037
$3.952
Continental Prestige Electronics
$4.960
$4.160
$3.480
$3.390
Aztec Data Supply Inc.
$5.044
UL approval ensures the product meets safety and quality standards, giving customers peace of mind.
Having multiple functions in one transformer can help simplify the design of the overall system and potentially reduce costs.
High isolation voltage ensures reliable signal transmission and protects the circuit from potential electrical hazards.
Optimal inductance value helps in efficient energy transfer and reduces signal distortion.
TR packing method with 13 INCH size makes it easy to handle and integrate into various systems.
Specifically designed for 1000 BASE-T applications ensures compatibility and reliable performance in such networks.
High maximum operating temperature allows the transformer to perform reliably in various environmental conditions.
Low minimum operating temperature ensures the transformer can operate effectively even in extreme cold environments.
TIN over Nickel terminal finish provides excellent conductivity and corrosion resistance, increasing the overall durability of the product.
Compact height enables the transformer to be used in space-constrained applications while maintaining performance.
Narrow width allows for efficient PCB layout and component placement, saving valuable board space.
Specifically designed for data communication applications, ensuring optimal performance in such systems.
Surface mounting feature simplifies assembly processes and makes it suitable for automated pick-and-place operations.
Moderate length provides a balance between compactness and ease of integration in various system designs.
Equal turns ratio in primary and secondary windings helps in maintaining signal integrity and efficient power transfer.
Pulse & Datacom Transformers 749023113C attributes and parameters. Explore more Pulse & Datacom Transformers devices from Wurth Elektronik
Additional Features:
Application:
Approvals (V):
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
749023113C Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
261
Deltrol Controls
Other Relays;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
M21038/27-07
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 130 Cel; Width: 8.89 mm;
1000B-5002XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 17.78 mm; Width: 12.45 mm; Dimensions: L17.53XB12.19XH5.72 (mm); Turns Ratio (Np:Ns): 1:1;
1016C
Murata Manufacturing
1016C by Murata Manufacturing is a pulse transformer with an isolation voltage of 3500V, inductance of 3000uH, and min ET product of 200V-us. It is used for data communication applications requiring high voltage isolation and precise signal transmission.
HM2102NLT
Pulse Electronics
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
Q4470-CLD
Coilcraft
Coilcraft's Q4470-CLD is a 0.25 W pulse transformer with 1500 V isolation voltage and 400 uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 85 °C, has a turns ratio of 1CT:1.3CT, and features surface mounting.
TG1G-E001NZRL
Halo Electronics
TG1G-E001NZRL by Halo Electronics is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is used in applications like 10/100 BASE-TX Ethernet, with a temperature range of -40 to 85 °C.
SD250-4L
Coilcraft's SD250-4L is a Pulse Transformer with 3750V Isolation Voltage, 1500uH Inductance, and 375V-us Min ET Product. Ideal for BASE/GATE DRIVE applications, it operates b/w -40 to 85°C and features Through Hole Mounting at L27.94xB27.94xH24.13mm dimensions.
PT61017PEL
Bourns
The Bourns PT61017PEL is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX, ETHERNET, and LAN applications. It operates b/w 0°C to 70°C and features surface mounting method.
SD250-1L
Coilcraft SD250-1L is a pulse transformer with 3750V isolation voltage, 1500uH inductance, and 375V-us min ET product. Ideal for base/gate drive applications, it operates b/w -40 to 85°C and features through-hole mounting.
78602/16C
78602/16C by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has a primary inductance of 4000 uH and a min ET product of 28 V-us. This transformer is commonly used in pulse and datacom applications.
H1102FNL
H1102FNL by Pulse Electronics is a UL-approved Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH primary inductance. Ideal for surface mount applications in data communication systems due to its compact dimensions of L12.7xB9.09xH5.99 (mm).
ALT4532M-201-T001
TDK
ALT4532M-201-T001 by TDK is a Datacom Transformer with inductance of 200uH, suitable for 10/1000 BASE-T, 100 BASE-TX LAN applications. It operates b/w -40 to 85°C and has dimensions of 4.5mm x 3.2mm x 2.9mm for surface mounting.
750311596
Wuerth Elektronik & Kg
The Wuerth Elektronik & Kg 750311596 is a Pulse & Datacom Transformer with an isolation voltage of 1500V, inductance of 12uH, and output current of 1.9A. It is used for data communication applications requiring high voltage isolation and efficient power transfer in compact spaces.
7490140123B
7490140123B by Wurth Elektronik is a DATACOM TRANSFORMER with 4500V isolation voltage, 350uH inductance, and UL approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features a compact size of 8.4mm x 14.75mm x 17.1mm for surface mount installation.
96046323069
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TRAY; Maximum Operating Temperature: 85 Cel; No. of Functions: 2; Width: 13.5 mm;
ISRF-0235-D101
Schurter Ag
ISRF-0235-D101 by Schurter Ag is a pulse transformer with an isolation voltage of 3200V, inductance of 1100uH, and max pulse rise time of 50ns. Ideal for datacom applications, it operates b/w -25°C to 100°C and features surface mounting with dimensions L15.2xB13.0xH11.0mm.
HX5008FNLT
HX5008FNLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It has an insertion loss of 3dB, inductance of 325uH, and operates b/w -40°C to 85°C. This transformer is UL approved and designed for surface mount applications in pulse and data communication systems.
SM51625EL
The Bourns SM51625EL is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 80uH primary inductance. Ideal for LAN, 10/100/1000 BASE-T, and Ethernet applications. It operates b/w -40°C to 85°C with dimensions of L17.55xB12.2xH6.0mm for surface mounting method.
SM13126PEL
SM13126PEL by Bourns is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features IEEE approvals.
H5007NLT
H5007NLT by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000KHz. Ideal for applications like 1000BASE-T, this transformer comes in compact dimensions of L17.53xB12.2xH5.26mm for surface mount installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7490100111A
Wurth Elektronik
7490100111A by Wuerth Elektronik & Kg is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500V. It has an insertion loss of 1.1 dB, inductance of 350uH, and operates b/w -40 to 105°C. Primarily used in LAN applications due to its compact dimensions (12.7mm x 8.8mm x 6.35mm) and surface mount feature for easy installation.
749020023A
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
749010012A
749010012A by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB8.8xH6.35 mm. It is used for 10/100 BASE-TX, AUTOMDIX, and LAN applications due to its surface mount feature and 1:1 turns ratio for primary to secondary winding.
749013011A
Wurth Elektronik 749013011A is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and primary inductance of 350uH. Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its compact dimensions of L12.7xB8.8xH6.35mm and surface mounting feature.
749010012
The Wurth Elektronik 749010012 is a pulse and datacom transformer with UL approval. It has an isolation voltage of 1500 V, insertion loss of 1.1 dB, and primary inductance of 350 uH. This surface mount transformer is suitable for LAN applications such as 10/100 BASE-TX networks.
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
749020010A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn) over Copper (Cu); Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
7490100110A
Wurth Elektronik's 7490100110A is a UL-approved transformer with 1500V isolation voltage, 1.1dB insertion loss, and 350uH inductance. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to +85°C and features surface mounting method.
749013021
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749013021; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Isolation Voltage: 1500 V;
749020011A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: TIN OVER NICKEL; Dimensions: L17.5XB14.2XH6.0 (mm); JESD-609 Code: e3;
749020010
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749020010; Approvals (V): UL; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
7490140122B
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Length: 17.1 mm; Application: 10/100 BASE-T; Maximum Operating Temperature: 85 Cel;
7490120110
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Terminal Finish: Tin (Sn); Width: 9.27 mm; No. of Functions: 1;
749012011
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 749012011; Terminal Finish: TIN SILVER; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1:1; 1:1;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; Application: 10/100 BASE-T; No. of Functions: 1; Packing Method: TR, 13 INCH;
749010013
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
7490100161A
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100161A; Approvals (V): UL; Terminal Finish: Tin/Copper (Sn/Cu); No. of Functions: 1;
749010310
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Maximum Operating Temperature: 85 Cel; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
7490220120
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved